6 回复 最新回复: Dec 26, 2017 7:25 PM Newsharp RSS

如何重新安装Connectrix - Brocade的FOS

Newsharp

客户现场的Connectrix - Brocade交换机CF卡损坏,请问大家是否有方法在新购买的CF卡上安装FOS?

  • 1. Re: 如何重新安装Connectrix - Brocade的FOS
    emc春哥

    FOS 是通过firmwaredownload命令安装在内部的partition上面的,无法安装在CF card上。

    如果是CF card 损坏,需要收集switch的日志做进一步分析和定位。

  • 2. Re: 如何重新安装Connectrix - Brocade的FOS
    Newsharp

    系统的FOS不是安装在CF卡上?难道交换机还其他的存储介质存放系统或者微码?

  • 3. Re: 如何重新安装Connectrix - Brocade的FOS
    hanjh

    嵌入式系统坏掉,只能回原厂烧录,自己修别想了

  • 4. Re: 如何重新安装Connectrix - Brocade的FOS
    Newsharp

    下面的信息是登录交换机输入一些命令的提示错误信息

    BEJMFG-FC-SWUP:admin> switchshow

    rbash: switchshow: command not found

    fabsys device open: No such device or address

    fabsys device open: No such device or address

    fabsys device open: No such device or address

    BEJMFG-FC-SWUP:admin> reboot

    fabos not yet initialized: -1

    fabsys device open: No such device or address

    fabsys device open: No such device or address

    fabsys device open: No such device or address

    BEJMFG-FC-SWUP:admin> version

    fabos not yet initialized: -1

    fabsys device open: No such device or address

    fabsys device open: No such device or address

    fabsys device open: No such device or address

    BEJMFG-FC-SWUP:admin> firmware

    firmwareactivate        firmwaredownload        firmwarerestore

    firmwarecleaninstall    firmwaredownloadstatus  firmwareshow

    firmwarecommit          firmwarekeyshow        

    BEJMFG-FC-SWUP:admin> firmwareshow

    sysmodAttach open failed: No such device or address

    Unable to initialize the system module. Command failed.

    fabsys device open: No such device or address

    fabsys device open: No such device or address

    fabsys device open: No such device or address

    BEJMFG-FC-SWUP:admin>

    The system is coming up, please wait...

  • 5. Re: 如何重新安装Connectrix - Brocade的FOS
    emc春哥

    这个文件系统损坏了,请拨打EMC support电话寻求帮助,需要更换switch.

  • 6. Re: 如何重新安装Connectrix - Brocade的FOS
    Newsharp

    通过这次瞎折腾,知道了一些命令,就是不知道这些命令什么时候能正常使用

    firmwarecleaninstall

    firmwarerestore

    尝试着用上面的两个命令做恢复,全部提示找不到设备。我用读卡器读取CF卡,CF两个分区全部正常,可以看到分区里面的内容。