2 Replies Latest reply: Nov 28, 2017 5:06 AM by sandesh_madgule93 RSS

Replacing MDS 9513 with MDS 9396

HEagle18

All,

 

We are planning to replace CISCO MDS 9513 switches with MDS 9396S on our two fabrics. These are the steps I have in mind.

 

1. Configure MDS 9396 and assign a domain id greater than the MDS 9513

2. connect console terminal

3.configure networking, ssh , zone set etc

4.Vsan configuration.

 

We need to create port to port documentation where to insert the cables

 

Can any one put more info on this.