3 Replies Latest reply: Feb 19, 2018 6:54 AM by HEagle18 RSS

Replacing MDS 9513 with MDS 9396




We are planning to replace CISCO MDS 9513 switches with MDS 9396S on our two fabrics. These are the steps I have in mind.


1. Configure MDS 9396 and assign a domain id greater than the MDS 9513

2. connect console terminal

3.configure networking, ssh , zone set etc

4.Vsan configuration.


We need to create port to port documentation where to insert the cables


Can any one put more info on this.