How do I check the Quota Policy for all file systems?

Product:

 

Celerra


Description:

 

Are quotas enabled on my Celerra?

What Quota Policy am I using on my file system?

 

Resolution:

 

  1. Open an SSH session to the Celerra Control Station.
  2. Run the following command to report the quota configuration for all file systems on a Data Mover.

 


[nasadmin@danvsa1 ~]$ nas_quotas -config -report -mover server_2


+------------------------------------------------------------------------------+
| Quota parameters for filesystem test1 mounted on /root_vdm_1/test1:
+------------------------------------------------------------------------------+
| Quota Policy: blocks
| User Quota: OFF
|
Group Quota: OFF
| Block grace period: (1.0 weeks)
| Inode grace period: (1.0 weeks)
| Default USER quota limits:
|     Block Soft: (         0), Block Hard: (         0)
|     Inode Soft: (         0), Inode Hard: (         0)
| Default GROUP quota limits:
|     Block Soft: (         0), Block Hard: (         0)
|     Inode Soft: (         0), Inode Hard: (         0)
| Deny Disk Space to users exceeding quotas:      YES
| Log an event when ...
|    Block hard limit reached/exceeded:            NO
|    Block soft limit (warning level) crossed:     NO
|    Quota check starts:                           NO
|    Quota Check ends:                             NO

+------------------------------------------------------------------------------+


done

 

On Server_2 in the example above there is only one file system and quotas are turned off. The policy is set to the default, which is blocks. The command will have to be run multiple times if you have other active Data Movers.