VMAX3 & VMAX All Flash: Can I use DHCP setting for connecting MMCS to customer network? (Dell EMC Correctable)


   Article Number:     504574                                   Article Version: 4     Article Type:    Break Fix 




VMAX All Flash,VMAX3 Series





The customer wants to use DHCP for providing IP addresses to both MMCSes.   
    Is DHCP a supported setting for the MMCS?






Connecting both MMCSes to the customer's network.   
    Network settings were change on the MMCS "network" interface to support DHCP.






Using DHCP to provide an IP address to any MMCS is NOT supported.   
    Both MMCSes MUST use a static IP address provided by the customer during installation phase.