|Article Number: 504074||Article Version: 3||Article Type: Break Fix|
This list is meant more as an alert to the Supporter or Customer that the error found is in fact an Operating System error, which in turn will generally (albeit not always) reflect environmental difficulties.
If you are therefore searching for an error message and find this Knowledgebase Article, you should first begin looking at environmental faults first, unless there is compelling evidence otherwise that the error is a result of some critical application misbehaviour - which is very rare.
There are numerous and wide gaps in many of the ranges so not all numbers are represented. This list is compiled from Windows 7 but he messages themselves are generally Windows-family global.
For further explanation of any specific error message, consult Microsoft or their online resources.
0x00000000  The operation completed successfully.
0x00000001  Incorrect function.
0x00000002  The system cannot find the file specified.
0x00000003  The system cannot find the path specified.
0x00000004  The system cannot open the file.
0x00000005  Access is denied.
0x00000006  The handle is invalid.
0x00000007  The storage control blocks were destroyed.
0x00000008  Not enough storage is available to process this command.
0x00000009  The storage control block address is invalid.
0x0000000A  The environment is incorrect.
0x0000000B  An attempt was made to load a program with an incorrect format.
0x0000000C  The access code is invalid.
0x0000000D  The data is invalid.
0x0000000E  Not enough storage is available to complete this operation.
0x0000000F  The system cannot find the drive specified.
0x00000010  The directory cannot be removed.
0x00000011  The system cannot move the file to a different disk drive.
0x00000012  There are no more files.
0x00000013  The media is write protected.
0x00000014  The system cannot find the device specified.
0x00000015  The device is not ready.
0x00000016  The device does not recognize the command.
0x00000017  Data error (cyclic redundancy check).
0x00000018  The program issued a command but the command length is incorrect.
0x00000019  The drive cannot locate a specific area or track on the disk.
0x0000001A  The specified disk or diskette cannot be accessed.
0x0000001B  The drive cannot find the sector requested.
0x0000001C  The printer is out of paper.
0x0000001D  The system cannot write to the specified device.
0x0000001E  The system cannot read from the specified device.
0x0000001F  A device attached to the system is not functioning.
0x00000020  The process cannot access the file because it is being used by another process.
0x00000021  The process cannot access the file because another process has locked a portion of the file.
0x00000024  Too many files opened for sharing.
0x00000026  Reached the end of the file.
0x00000027  The disk is full.
0x00000032  The request is not supported.
0x00000033  Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
0x00000034  You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.
0x00000035  The network path was not found.
0x00000036  The network is busy.
0x00000037  The specified network resource or device is no longer available.
0x00000038  The network BIOS command limit has been reached.
0x00000039  A network adapter hardware error occurred.
0x0000003A  The specified server cannot perform the requested operation.
0x0000003B  An unexpected network error occurred.
0x0000003C  The remote adapter is not compatible.
0x0000003D  The printer queue is full.
0x0000003E  Space to store the file waiting to be printed is not available on the server.
0x0000003F  Your file waiting to be printed was deleted.
0x00000040  The specified network name is no longer available.
0x00000041  Network access is denied.
0x00000042  The network resource type is not correct.
0x00000043  The network name cannot be found.
0x00000044  The name limit for the local computer network adapter card was exceeded.
0x00000045  The network BIOS session limit was exceeded.
0x00000046  The remote server has been paused or is in the process of being started.
0x00000047  No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
0x00000048  The specified printer or disk device has been paused.
0x00000050  The file exists.
0x00000052  The directory or file cannot be created.
0x00000053  Fail on INT 24.
0x00000054  Storage to process this request is not available.
0x00000055  The local device name is already in use.
0x00000056  The specified network password is not correct.
0x00000057  The parameter is incorrect.
0x00000058  A write fault occurred on the network.
0x00000059  The system cannot start another process at this time.
0x00000064  Cannot create another system semaphore.
0x00000065  The exclusive semaphore is owned by another process.
0x00000066  The semaphore is set and cannot be closed.
0x00000067  The semaphore cannot be set again.
0x00000068  Cannot request exclusive semaphores at interrupt time.
0x00000069  The previous ownership of this semaphore has ended.
0x0000006B  The program stopped because an alternate diskette was not inserted.
0x0000006C  The disk is in use or locked by another process.
0x0000006D  The pipe has been ended.
0x0000006E  The system cannot open the device or file specified.
0x0000006F  The file name is too long.
0x00000070  There is not enough space on the disk.
0x00000071  No more internal file identifiers available.
0x00000072  The target internal file identifier is incorrect.
0x00000075  The IOCTL call made by the application program is not correct.
0x00000076  The verify-on-write switch parameter value is not correct.
0x00000077  The system does not support the command requested.
0x00000078  This function is not supported on this system.
0x00000079  The semaphore timeout period has expired.
0x0000007A  The data area passed to a system call is too small.
0x0000007B  The filename, directory name, or volume label syntax is incorrect.
0x0000007C  The system call level is not correct.
0x0000007D  The disk has no volume label.
0x0000007E  The specified module could not be found.
0x0000007F  The specified procedure could not be found.
0x00000080  There are no child processes to wait for.
0x00000082  Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
0x00000083  An attempt was made to move the file pointer before the beginning of the file.
0x00000084  The file pointer cannot be set on the specified device or file.
0x00000085  A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
0x00000086  An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
0x00000087  An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
0x00000088  The system tried to delete the JOIN of a drive that is not joined.
0x00000089  The system tried to delete the substitution of a drive that is not substituted.
0x0000008A  The system tried to join a drive to a directory on a joined drive.
0x0000008B  The system tried to substitute a drive to a directory on a substituted drive.
0x0000008C  The system tried to join a drive to a directory on a substituted drive.
0x0000008D  The system tried to SUBST a drive to a directory on a joined drive.
0x0000008E  The system cannot perform a JOIN or SUBST at this time.
0x0000008F  The system cannot join or substitute a drive to or for a directory on the same drive.
0x00000090  The directory is not a subdirectory of the root directory.
0x00000091  The directory is not empty.
0x00000092  The path specified is being used in a substitute.
0x00000093  Not enough resources are available to process this command.
0x00000094  The path specified cannot be used at this time.
0x00000095  An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
0x00000096  System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
0x00000097  The number of specified semaphore events for DosMuxSemWait is not correct.
0x00000098  DosMuxSemWait did not execute; too many semaphores are already set.
0x00000099  The DosMuxSemWait list is not correct.
0x0000009A  The volume label you entered exceeds the label character limit of the target file system.
0x0000009B  Cannot create another thread.
0x0000009C  The recipient process has refused the signal.
0x0000009D  The segment is already discarded and cannot be locked.
0x0000009E  The segment is already unlocked.
0x0000009F  The address for the thread ID is not correct.
0x000000A0  One or more arguments are not correct.
0x000000A1  The specified path is invalid.
0x000000A2  A signal is already pending.
0x000000A4  No more threads can be created in the system.
0x000000A7  Unable to lock a region of a file.
0x000000AA  The requested resource is in use.
0x000000AD  A lock request was not outstanding for the supplied cancel region.
0x000000AE  The file system does not support atomic changes to the lock type.
0x000000B4  The system detected a segment number that was not correct.
0x000000B7  Cannot create a file when that file already exists.
0x000000BA  The flag passed is not correct.
0x000000BB  The specified system semaphore name was not found.
0x000000C4  The operating system cannot run this application program.
0x000000C5  The operating system is not presently configured to run this application.
0x000000C7  The operating system cannot run this application program.
0x000000C8  The code segment cannot be greater than or equal to 64K.
0x000000CB  The system could not find the environment option that was entered.
0x000000CD  No process in the command subtree has a signal handler.
0x000000CE  The filename or extension is too long.
0x000000CF  The ring 2 stack is in use.
0x000000D0  The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
0x000000D1  The signal being posted is not correct.
0x000000D2  The signal handler cannot be set.
0x000000D4  The segment is locked and cannot be reallocated.
0x000000D6  Too many dynamic-link modules are attached to this program or dynamic-link module.
0x000000D7  Cannot nest calls to LoadModule.
0x000000DC  This file is checked out or locked for editing by another user.
0x000000DD  The file must be checked out before saving changes.
0x000000DE  The file type being saved or retrieved has been blocked.
0x000000DF  The file size exceeds the limit allowed and cannot be saved.
0x000000E0  Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site, and select the option to login automatically.
0x000000E1  Operation did not complete successfully because the file contains a virus.
0x000000E2  This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location.
0x000000E5  The pipe is local.
0x000000E6  The pipe state is invalid.
0x000000E7  All pipe instances are busy.
0x000000E8  The pipe is being closed.
0x000000E9  No process is on the other end of the pipe.
0x000000EA  More data is available.
0x000000F0  The session was canceled.
0x000000FE  The specified extended attribute name was invalid.
0x000000FF  The extended attributes are inconsistent.
0x00000102  The wait operation timed out.
0x00000103  No more data is available.
0x0000010A  The copy functions cannot be used.
0x0000010B  The directory name is invalid.
0x00000113  The extended attributes did not fit in the buffer.
0x00000114  The extended attribute file on the mounted file system is corrupt.
0x00000115  The extended attribute table file is full.
0x00000116  The specified extended attribute handle is invalid.
0x0000011A  The mounted file system does not support extended attributes.
0x00000120  Attempt to release mutex not owned by caller.
0x0000012A  Too many posts were made to a semaphore.
0x0000012B  Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
0x0000012C  The oplock request is denied.
0x0000012D  An invalid oplock acknowledgment was received by the system.
0x0000012E  The volume is too fragmented to complete this operation.
0x0000012F  The file cannot be opened because it is in the process of being deleted.
0x00000130  Short name settings may not be changed on this volume due to the global registry setting.
0x00000131  Short names are not enabled on this volume.
0x00000132  Please run CHKDSK on the volume.
0x00000133  A requested file lock operation cannot be processed due to an invalid byte range.
0x00000134  The subsystem needed to support the image type is not present.
0x00000135  The specified file already has a notification GUID associated with it.
0x0000013E  The scope specified was not found.
0x0000015E  No action was taken as a system reboot is required.
0x0000015F  The shutdown operation failed.
0x00000160  The restart operation failed.
0x00000161  The maximum number of sessions has been reached.
0x00000190  The thread is already in background processing mode.
0x00000191  The thread is not in background processing mode.
0x00000192  The process is already in background processing mode.
0x00000193  The process is not in background processing mode.
0x000001E7  Attempt to access invalid address.
0x000001F4  User profile cannot be loaded.
0x00000216  Arithmetic result exceeded 32 bits.
0x00000217  There is a process on other end of the pipe.
0x00000218  Waiting for a process to open the other end of the pipe.
0x00000219  Application verifier has found an error in the current process.
0x0000021A  An error occurred in the ABIOS subsystem.
0x0000021B  A warning occurred in the WX86 subsystem.
0x0000021C  An error occurred in the WX86 subsystem.
0x0000021D  An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine.
0x0000021E  Unwind exception code.
0x0000021F  An invalid or unaligned stack was encountered during an unwind operation.
0x00000220  An invalid unwind target was encountered during an unwind operation.
0x00000221  Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort
0x00000222  Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port.
0x00000223  An attempt was made to lower a quota limit below the current usage.
0x00000224  An attempt was made to attach to a device that was already attached to another device.
0x00000225  An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references.
0x00000226  Profiling not started.
0x00000227  Profiling not stopped.
0x00000228  The passed ACL did not contain the minimum required information.
0x00000229  The number of active profiling objects is at the maximum and no more may be started.
0x0000022A  Used to indicate that an operation cannot continue without blocking for I/O.
0x0000022B  Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process.
0x0000022C  In this case information is lost, however, the filter correctly handles the exception.
0x0000022D  In this case information is lost, however, the filter correctly handles the exception.
0x0000022E  In this case information is lost, however, the filter correctly handles the exception.
0x0000022F  A malformed function table was encountered during an unwind operation.
0x00000230  This causes the protection attempt to fail, which may cause a file creation attempt to fail.
0x00000231  Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors.
0x00000233  Indicates that the starting value for the LDT information was not an integral multiple of the selector size.
0x00000234  Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors.
0x00000235  Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads.
0x00000236  An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified.
0x00000237  Page file quota was exceeded.
0x00000238  The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.
0x00000239  The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required.
0x0000023A  The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines.
0x0000023B  The I/O permissions for the process could not be changed.
0x0000023C  The application terminated as a result of a CTRL+C.
0x0000023D  The required system file hs is bad or missing.
0x0000023E  The exception s (0x
0x0000023F  The application was unable to start correctly (0xlx). Click OK to close the application.
0x00000240  The creation of the paging file hs failed (lx). The requested size was ld.
0x00000241  Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
0x00000242  No paging file was specified in the system configuration.
0x00000243  A real-mode application issued a floating-point instruction and floating-point hardware is not present.
0x00000244  An event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread.
0x00000245  A Windows Server has an incorrect configuration.
0x00000246  An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE.
0x00000247  The Unicode character is not defined in the Unicode character set installed on the system.
0x00000248  The paging file cannot be created on a floppy diskette.
0x00000249  The system BIOS failed to connect a system interrupt to the device or bus for which the device is connected.
0x0000024A  This operation is only allowed for the Primary Domain Controller of the domain.
0x0000024B  An attempt was made to acquire a mutant such that its maximum count would have been exceeded.
0x0000024C  A volume has been accessed for which a file system driver is required that has not yet been loaded.
0x0000024D  It is corrupt, absent, or not writable.
0x0000024E  An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error.
0x0000024F  The hs system process terminated unexpectedly with a status of 0x
0x00000250  The TDI client could not handle the data received during an indication.
0x00000251  NTVDM encountered a hard error.
0x00000252  The driver hs failed to complete a cancelled I/O request in the allotted time.
0x00000253  An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message.
0x00000254  This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.
0x00000255  The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have been put in the shared memory window.
0x00000256  The stream is not a tiny stream.
0x00000257  The request must be handled by the stack overflow code.
0x00000258  Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream.
0x00000259  The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation.
0x0000025A  The bucket array must be grown. Retry transaction after doing so.
0x0000025B  The user/kernel marshalling buffer has overflowed.
0x0000025C  The supplied variant structure contains invalid data.
0x0000025D  The specified buffer contains ill-formed data.
0x0000025E  An attempt to generate a security audit failed.
0x0000025F  The timer resolution was not previously set by the current process.
0x00000260  There is insufficient account information to log you on.
0x00000261  The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly.
0x00000262  The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process may operate incorrectly.
0x00000263  There is an IP address conflict with another system on the network
0x00000264  There is an IP address conflict with another system on the network
0x00000265  The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored.
0x00000266  A callback return system service cannot be executed when no callback is active.
0x00000267  Please choose a longer password.
0x00000268  If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned.
0x00000269  The policy of your user account does not allow this. Please select a password that you have not previously used.
0x0000026A  The specified compression format is unsupported.
0x0000026B  The specified hardware profile configuration is invalid.
0x0000026C  The specified Plug and Play registry device path is invalid.
0x0000026D  The specified quota list is internally inconsistent with its descriptor.
0x0000026E  The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product.
0x0000026F  The relocation occurred because the DLL hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
0x00000270  The application failed to initialize because the window station is shutting down.
0x00000271  The validation process needs to continue on to the next step.
0x00000272  There are no more matches for the current index enumeration.
0x00000273  The range could not be added to the range list because of a conflict.
0x00000274  The server process is running under a SID different than that required by client.
0x00000275  A group marked use for deny only cannot be enabled.
0x00000276  Multiple floating point faults.
0x00000277  Multiple floating point traps.
0x00000278  The requested interface is not supported.
0x00000279  The driver hs does not support standby mode. Updating this driver may allow the system to go to standby mode.
0x0000027B  During this process, memory requests for some applications may be denied. For more information, see Help.
0x0000027C  A device was removed so enumeration must be restarted.
0x0000027D  The system has been shut down.
0x0000027E  Device will not start without a reboot.
0x0000027F  There is not enough power to complete the requested operation.
0x00000280  ERROR_MULTIPLE_FAULT_VIOLATION
0x00000281  The system is in the process of shutting down.
0x00000282  An attempt to remove a processes DebugPort was made, but a port was not already associated with the process.
0x00000283  This version of Windows is not compatible with the behavior version of directory forest, domain or domain controller.
0x00000284  The specified range could not be found in the range list.
0x00000286  The driver was not loaded because the system is booting into safe mode.
0x00000287  The driver was not loaded because it failed it's initialization call.
0x00000288  This may be caused by a failure of your hardware or by a poor connection.
0x00000289  The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached.
0x0000028A  The device object parameter is either not a valid device object or is not attached to the volume specified by the file name.
0x0000028B  A Machine Check Error has occurred. Please check the system eventlog for additional information.
0x0000028D  System hive size has exceeded its limit.
0x0000028E  The driver could not be loaded because a previous version of the driver is still in memory.
0x0000028F  Please wait while the Volume Shadow Copy Service prepares volume hs for hibernation.
0x00000290  The system has failed to hibernate (The error code is hs). Hibernation will be disabled until the system is restarted.
0x00000299  The requested operation could not be completed due to a file system limitation
0x0000029C  An assertion failure has occurred.
0x0000029D  An error occurred in the ACPI subsystem.
0x0000029E  WOW Assertion Error.
0x0000029F  Please contact your system vendor for system BIOS update.
0x000002A0  A translator failed to translate resources.
0x000002A1  A IRQ translator failed to translate resources.
0x000002A3  the system debugger was awakened by an interrupt.
0x000002A4  Handles to objects have been automatically closed as a result of the requested operation.
0x000002A5  The specified access control list (ACL) contained more information than was expected.
0x000002A6  The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired).
0x000002A7  The media may have changed.
0x000002A8  A substitute prefix was used, which will not compromise system security. However, this may provide a more restrictive access than intended.
0x000002A9  The create operation stopped after reaching a symbolic link
0x000002AA  A long jump has been executed.
0x000002AB  The Plug and Play query operation was not successful.
0x000002AC  A frame consolidation has been executed.
0x000002AD  was corrupted and it has been recovered. Some data might have been lost.
0x000002AE  The application is attempting to run executable code from the module hs. This may be insecure. An alternative, hs, is available. Should the application use the secure module hs?
0x000002AF  The application is loading executable code from the module hs. This is secure, but may be incompatible with previous releases of the operating system. An alternative, hs, is available. Should the application use the secure module hs?
0x000002B0  Debugger did not handle the exception.
0x000002B1  Debugger will reply later.
0x000002B2  Debugger cannot provide handle.
0x000002B3  Debugger terminated thread.
0x000002B4  Debugger terminated process.
0x000002B5  Debugger got control C.
0x000002B6  Debugger printed exception on control C.
0x000002B7  Debugger received RIP exception.
0x000002B8  Debugger received control break.
0x000002B9  Debugger command communication exception.
0x000002BA  An attempt was made to create an object and the object name already existed.
0x000002BB  A thread termination occurred while the thread was suspended. The thread was resumed, and termination proceeded.
0x000002BC  An image file could not be mapped at the address specified in the image file. Local fixups must be performed on this image.
0x000002BD  This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to be created.
0x000002BE  An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments.
0x000002BF  Select OK to set current directory to hs, or select CANCEL to exit.
0x000002C0  This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was unable to reassign the failing area of the device.
0x000002C1  This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device.
0x000002C2  The image file hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.
0x000002C3  The network transport returned partial data to its client. The remaining data will be sent later.
0x000002C4  The network transport returned data to its client that was marked as expedited by the remote system.
0x000002C5  The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later.
0x000002C6  The TDI indication has completed successfully.
0x000002C7  The TDI indication has entered the pending state.
0x000002C8  Checking file system on wZ
0x000002C9  hs
0x000002CA  The specified registry key is referenced by a predefined handle.
0x000002CB  The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory and from the process.
0x000002CC  hs
0x000002CD  One of the pages to lock was already locked.
0x000002CF  ERROR_ALREADY_WIN32
0x000002D0  The image file hs is valid, but is for a machine type other than the current machine.
0x000002D1  A yield execution was performed and no thread was available to run.
0x000002D2  The resumable flag to a timer API was ignored.
0x000002D3  The arbiter has deferred arbitration of these resources to its parent
0x000002D4  The inserted CardBus device cannot be started because of a configuration error on "hs".
0x000002D5  The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported.
0x000002D6  The system was put into hibernation.
0x000002D7  The system was resumed from hibernation.
0x000002D9  A device driver is leaking locked I/O pages causing system degradation. The system has automatically enabled tracking code in order to try and catch the culprit.
0x000002DA  The system has awoken
0x000002DB  ERROR_WAIT_1
0x000002DC  ERROR_WAIT_2
0x000002DD  ERROR_WAIT_3
0x000002DE  ERROR_WAIT_63
0x000002DF  ERROR_ABANDONED_WAIT_0
0x000002E0  ERROR_ABANDONED_WAIT_63
0x000002E1  ERROR_USER_APC
0x000002E2  ERROR_KERNEL_APC
0x000002E3  ERROR_ALERTED
0x000002E4  The requested operation requires elevation.
0x000002E5  A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
0x000002E6  An open/create operation completed while an oplock break is underway.
0x000002E7  A new volume has been mounted by a file system.
0x000002E8  The commit has now been completed.
0x000002E9  This indicates that a notify change request has been completed due to closing the handle which made the notify change request.
0x000002EA  The computer WAS able to connect on a secondary transport.
0x000002EB  Page fault was a transition fault.
0x000002EC  Page fault was a demand zero fault.
0x000002ED  Page fault was a demand zero fault.
0x000002EE  Page fault was a demand zero fault.
0x000002EF  Page fault was satisfied by reading from a secondary storage device.
0x000002F0  Cached page was locked during operation.
0x000002F1  Crash dump exists in paging file.
0x000002F2  Specified buffer contains all zeros.
0x000002F3  A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
0x000002F4  The device has succeeded a query-stop and its resource requirements have changed.
0x000002F5  The translator has translated these resources into the global space and no further translations should be performed.
0x000002F6  A process being terminated has no threads to terminate.
0x000002F7  The specified process is not part of a job.
0x000002F8  The specified process is part of a job.
0x000002F9  The system is now ready for hibernation.
0x000002FA  A file system or file system filter driver has successfully completed an FsFilter operation.
0x000002FB  The specified interrupt vector was already connected.
0x000002FC  The specified interrupt vector is still connected.
0x000002FD  An operation is blocked waiting for an oplock.
0x000002FE  Debugger handled exception
0x000002FF  Debugger continued
0x00000300  An exception occurred in a user mode callback and the kernel callback frame should be removed.
0x00000301  Compression is disabled for this volume.
0x00000302  The data provider cannot fetch backwards through a result set.
0x00000303  The data provider cannot scroll backwards through a result set.
0x00000304  The data provider requires that previously fetched data is released before asking for more data.
0x00000305  The data provider was not able to interpret the flags set for a column binding in an accessor.
0x00000306  One or more errors occurred while processing the request.
0x00000307  The implementation is not capable of performing the request.
0x00000308  The client of a component requested an operation which is not valid given the state of the component instance.
0x00000309  A version number could not be parsed.
0x0000030A  The iterator's start position is invalid.
0x0000030B  The hardware has reported an uncorrectable memory error.
0x0000030C  The attempted operation required self healing to be enabled.
0x0000030D  The Desktop heap encountered an error while allocating session memory. There is more information in the system event log.
0x00000310  A thread is getting dispatched with MCA EXCEPTION because of MCA.
0x00000313  A valid hibernation file has been invalidated and should be abandoned.
0x00000314  This error may be caused by network connectivity issues. Please try to save this file elsewhere.
0x00000315  This error was returned by the server on which the file exists. Please try to save this file elsewhere.
0x00000316  This error may be caused if the device has been removed or the media is write-protected.
0x00000317  The resources required for this device conflict with the MCFG table.
0x00000320  The oplock that was associated with this handle is now associated with a different handle.
0x00000321  An oplock of the requested level cannot be granted. An oplock of a lower level may be available.
0x00000322  The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken.
0x00000323  The handle with which this oplock was associated has been closed. The oplock is now broken.
0x00000324  The specified access control entry (ACE) does not contain a condition.
0x00000325  The specified access control entry (ACE) contains an invalid condition.
0x000003E2  Access to the extended attribute was denied.
0x000003E3  The I/O operation has been aborted because of either a thread exit or an application request.
0x000003E4  Overlapped I/O event is not in a signaled state.
0x000003E5  Overlapped I/O operation is in progress.
0x000003E6  Invalid access to memory location.
0x000003E7  Error performing inpage operation.
0x000003E9  Recursion too deep; the stack overflowed.
0x000003EA  The window cannot act on the sent message.
0x000003EB  Cannot complete this function.
0x000003EC  Invalid flags.
0x000003ED  Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
0x000003EE  The volume for a file has been externally altered so that the opened file is no longer valid.
0x000003EF  The requested operation cannot be performed in full-screen mode.
0x000003F0  An attempt was made to reference a token that does not exist.
0x000003F1  The configuration registry database is corrupt.
0x000003F2  The configuration registry key is invalid.
0x000003F3  The configuration registry key could not be opened.
0x000003F4  The configuration registry key could not be read.
0x000003F5  The configuration registry key could not be written.
0x000003F6  One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
0x000003F7  The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
0x000003F8  An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.
0x000003F9  The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
0x000003FA  Illegal operation attempted on a registry key that has been marked for deletion.
0x000003FB  System could not allocate the required space in a registry log.
0x000003FC  Cannot create a symbolic link in a registry key that already has subkeys or values.
0x000003FD  Cannot create a stable subkey under a volatile parent key.
0x000003FE  A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
0x0000041B  A stop control has been sent to a service that other running services are dependent on.
0x0000041C  The requested control is not valid for this service.
0x0000041D  The service did not respond to the start or control request in a timely fashion.
0x0000041E  A thread could not be created for the service.
0x0000041F  The service database is locked.
0x00000420  An instance of the service is already running.
0x00000421  The account name is invalid or does not exist, or the password is invalid for the account name specified.
0x00000422  The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
0x00000423  Circular service dependency was specified.
0x00000424  The specified service does not exist as an installed service.
0x00000425  The service cannot accept control messages at this time.
0x00000426  The service has not been started.
0x00000427  The service process could not connect to the service controller.
0x00000428  An exception occurred in the service when handling the control request.
0x00000429  The database specified does not exist.
0x0000042A  The service has returned a service-specific error code.
0x0000042B  The process terminated unexpectedly.
0x0000042C  The dependency service or group failed to start.
0x0000042D  The service did not start due to a logon failure.
0x0000042E  After starting, the service hung in a start-pending state.
0x0000042F  The specified service database lock is invalid.
0x00000430  The specified service has been marked for deletion.
0x00000431  The specified service already exists.
0x00000432  The system is currently running with the last-known-good configuration.
0x00000433  The dependency service does not exist or has been marked for deletion.
0x00000434  The current boot has already been accepted for use as the last-known-good control set.
0x00000435  No attempts to start the service have been made since the last boot.
0x00000436  The name is already in use as either a service name or a service display name.
0x00000437  The account specified for this service is different from the account specified for other services running in the same process.
0x00000438  Failure actions can only be set for Win32 services, not for drivers.
0x00000439  Therefore, the service control manager cannot take action if this service's process terminates unexpectedly.
0x0000043A  No recovery program has been configured for this service.
0x0000043B  The executable program that this service is configured to run in does not implement the service.
0x0000043C  This service cannot be started in Safe Mode
0x0000044C  The physical end of the tape has been reached.
0x0000044D  A tape access reached a filemark.
0x0000044E  The beginning of the tape or a partition was encountered.
0x0000044F  A tape access reached the end of a set of files.
0x00000450  No more data is on the tape.
0x00000451  Tape could not be partitioned.
0x00000452  When accessing a new tape of a multivolume partition, the current block size is incorrect.
0x00000453  Tape partition information could not be found when loading a tape.
0x00000454  Unable to lock the media eject mechanism.
0x00000455  Unable to unload the media.
0x00000456  The media in the drive may have changed.
0x00000457  The I/O bus was reset.
0x00000458  No media in drive.
0x00000459  No mapping for the Unicode character exists in the target multi-byte code page.
0x0000045A  A dynamic link library (DLL) initialization routine failed.
0x0000045B  A system shutdown is in progress.
0x0000045C  Unable to abort the system shutdown because no shutdown was in progress.
0x0000045D  The request could not be performed because of an I/O device error.
0x0000045E  No serial device was successfully initialized. The serial driver will unload.
0x0000045F  Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
0x00000460  (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
0x00000461  (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
0x00000462  No ID address mark was found on the floppy disk.
0x00000463  Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
0x00000464  The floppy disk controller reported an error that is not recognized by the floppy disk driver.
0x00000465  The floppy disk controller returned inconsistent results in its registers.
0x00000466  While accessing the hard disk, a recalibrate operation failed, even after retries.
0x00000467  While accessing the hard disk, a disk operation failed even after retries.
0x00000468  While accessing the hard disk, a disk controller reset was needed, but even that failed.
0x00000469  Physical end of tape encountered.
0x0000046A  Not enough server storage is available to process this command.
0x0000046B  A potential deadlock condition has been detected.
0x0000046C  The base address or the file offset specified does not have the proper alignment.
0x00000474  An attempt to change the system power state was vetoed by another application or driver.
0x00000475  The system BIOS failed an attempt to change the system power state.
0x00000476  An attempt was made to create more links on a file than the file system supports.
0x0000047E  The specified program requires a newer version of Windows.
0x0000047F  The specified program is not a Windows or MS-DOS program.
0x00000480  Cannot start more than one instance of the specified program.
0x00000481  The specified program was written for an earlier version of Windows.
0x00000482  One of the library files needed to run this application is damaged.
0x00000483  No application is associated with the specified file for this operation.
0x00000484  An error occurred in sending the command to the application.
0x00000485  One of the library files needed to run this application cannot be found.
0x00000486  The current process has used all of its system allowance of handles for Window Manager objects.
0x00000487  The message can be used only with synchronous operations.
0x00000488  The indicated source element has no media.
0x00000489  The indicated destination element already contains media.
0x0000048A  The indicated element does not exist.
0x0000048B  The indicated element is part of a magazine that is not present.
0x0000048C  The indicated device requires reinitialization due to hardware errors.
0x0000048D  The device has indicated that cleaning is required before further operations are attempted.
0x0000048E  The device has indicated that its door is open.
0x0000048F  The device is not connected.
0x00000490  Element not found.
0x00000491  There was no match for the specified key in the index.
0x00000492  The property set specified does not exist on the object.
0x00000493  The point passed to GetMouseMovePoints is not in the buffer.
0x00000494  The tracking (workstation) service is not running.
0x00000495  The Volume ID could not be found.
0x00000497  Unable to remove the file to be replaced.
0x00000498  Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.
0x00000499  Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.
0x0000049A  The volume change journal is being deleted.
0x0000049B  The volume change journal is not active.
0x0000049C  A file was found, but it may not be the correct file.
0x0000049D  The journal entry has been deleted from the journal.
0x000004A6  A system shutdown has already been scheduled.
0x000004A7  The system shutdown cannot be initiated because there are other users logged on to the computer.
0x000004B0  The specified device name is invalid.
0x000004B1  The device is not currently connected but it is a remembered connection.
0x000004B2  The local device name has a remembered connection to another network resource.
0x000004B3  The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Please try retyping the path or contact your network administrator.
0x000004B4  The specified network provider name is invalid.
0x000004B5  Unable to open the network connection profile.
0x000004B6  The network connection profile is corrupted.
0x000004B7  Cannot enumerate a noncontainer.
0x000004B8  An extended error has occurred.
0x000004B9  The format of the specified group name is invalid.
0x000004BA  The format of the specified computer name is invalid.
0x000004BB  The format of the specified event name is invalid.
0x000004BC  The format of the specified domain name is invalid.
0x000004BD  The format of the specified service name is invalid.
0x000004BE  The format of the specified network name is invalid.
0x000004BF  The format of the specified share name is invalid.
0x000004C0  The format of the specified password is invalid.
0x000004C1  The format of the specified message name is invalid.
0x000004C2  The format of the specified message destination is invalid.
0x000004C3  Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.
0x000004C4  An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
0x000004C5  The workgroup or domain name is already in use by another computer on the network.
0x000004C6  The network is not present or not started.
0x000004C7  The operation was canceled by the user.
0x000004C8  The requested operation cannot be performed on a file with a user-mapped section open.
0x000004C9  The remote computer refused the network connection.
0x000004CA  The network connection was gracefully closed.
0x000004CB  The network transport endpoint already has an address associated with it.
0x000004CC  An address has not yet been associated with the network endpoint.
0x000004CD  An operation was attempted on a nonexistent network connection.
0x000004CE  An invalid operation was attempted on an active network connection.
0x000004CF  The network location cannot be reached. For information about network troubleshooting, see Windows Help.
0x000004D0  The network location cannot be reached. For information about network troubleshooting, see Windows Help.
0x000004D1  The network location cannot be reached. For information about network troubleshooting, see Windows Help.
0x000004D2  No service is operating at the destination network endpoint on the remote system.
0x000004D3  The request was aborted.
0x000004D4  The network connection was aborted by the local system.
0x000004D5  The operation could not be completed. A retry should be performed.
0x000004D6  A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
0x000004D7  Attempting to log in during an unauthorized time of day for this account.
0x000004D8  The account is not authorized to log in from this station.
0x000004D9  The network address could not be used for the operation requested.
0x000004DA  The service is already registered.
0x000004DB  The specified service does not exist.
0x000004DC  The operation being requested was not performed because the user has not been authenticated.
0x000004DD  The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
0x000004DE  Continue with work in progress.
0x000004DF  An attempt was made to perform an initialization operation when initialization has already been completed.
0x000004E0  No more local devices.
0x000004E1  The specified site does not exist.
0x000004E2  A domain controller with the specified name already exists.
0x000004E3  This operation is supported only when you are connected to the server.
0x000004E4  The group policy framework should call the extension even if there are no changes.
0x000004E5  The specified user does not have a valid profile.
0x000004E6  This operation is not supported on a computer running Windows Server 2003 for Small Business Server
0x000004E7  The server machine is shutting down.
0x000004E8  The remote system is not available. For information about network troubleshooting, see Windows Help.
0x000004E9  The security identifier provided is not from an account domain.
0x000004EA  The security identifier provided does not have a domain component.
0x000004EB  AppHelp dialog canceled thus preventing the application from starting.
0x000004EC  This program is blocked by group policy. For more information, contact your system administrator.
0x000004ED  A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.
0x000004EE  The share is currently offline or does not exist.
0x000004EF  The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. There is more information in the system event log.
0x000004F0  The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem.
0x000004F1  The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.
0x000004F7  The machine is locked and cannot be shut down without the force option.
0x000004F9  An application-defined callback gave invalid data when called.
0x000004FA  The group policy framework should call the extension in the synchronous foreground policy refresh.
0x000004FB  This driver has been blocked from loading
0x000004FC  A dynamic link library (DLL) referenced a module that was neither a DLL nor the process's executable image.
0x000004FD  Windows cannot open this program since it has been disabled.
0x000004FE  Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
0x000004FF  A transaction recover failed.
0x00000500  The current thread has already been converted to a fiber.
0x00000501  The current thread has already been converted from a fiber.
0x00000502  The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
0x00000503  Data present in one of the parameters is more than the function can operate on.
0x00000504  An attempt to do an operation on a debug object failed because the object is in the process of being deleted.
0x00000505  An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed.
0x00000507  Insufficient information exists to identify the cause of failure.
0x00000508  The parameter passed to a C runtime function is incorrect.
0x00000509  The operation occurred beyond the valid data length of the file.
0x0000050A  The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service.
0x0000050B  The process hosting the driver for this device has been terminated.
0x0000050C  An operation attempted to exceed an implementation-defined limit.
0x0000050D  Either the target process, or the target thread's containing process, is a protected process.
0x0000050E  The service notification client is lagging too far behind the current state of services in the machine.
0x0000050F  To free up disk space, move files to a different location or delete unnecessary files. For more information, contact your system administrator.
0x00000510  The requested file operation failed because the storage policy blocks that type of file. For more information, contact your system administrator.
0x00000511  You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration.
0x00000512  A thread involved in this operation appears to be unresponsive.
0x00000513  Indicates a particular Security ID may not be assigned as the label of an object.
0x00000514  Not all privileges or groups referenced are assigned to the caller.
0x00000515  Some mapping between account names and security IDs was not done.
0x00000516  No system quota limits are specifically set for this account.
0x00000517  No encryption key is available. A well-known encryption key was returned.
0x00000518  The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.
0x00000519  The revision level is unknown.
0x0000051A  Indicates two revision levels are incompatible.
0x0000051B  This security ID may not be assigned as the owner of this object.
0x0000051C  This security ID may not be assigned as the primary group of an object.
0x0000051D  An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
0x0000051E  The group may not be disabled.
0x0000051F  There are currently no logon servers available to service the logon request.
0x00000520  A specified logon session does not exist. It may already have been terminated.
0x00000521  A specified privilege does not exist.
0x00000522  A required privilege is not held by the client.
0x00000523  The name provided is not a properly formed account name.
0x00000524  The specified account already exists.
0x00000525  The specified account does not exist.
0x00000526  The specified group already exists.
0x00000527  The specified group does not exist.
0x00000528  Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
0x00000529  The specified user account is not a member of the specified group account.
0x0000052A  The last remaining administration account cannot be disabled or deleted.
0x0000052B  Unable to update the password. The value provided as the current password is incorrect.
0x0000052C  Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
0x0000052D  Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirements of the domain.
0x0000052E  Logon failure: unknown user name or bad password.
0x0000052F  Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced.
0x00000530  Logon failure: account logon time restriction violation.
0x00000531  Logon failure: user not allowed to log on to this computer.
0x00000532  Logon failure: the specified account password has expired.
0x00000533  Logon failure: account currently disabled.
0x00000534  No mapping between account names and security IDs was done.
0x00000535  Too many local user identifiers (LUIDs) were requested at one time.
0x00000536  No more local user identifiers (LUIDs) are available.
0x00000537  The subauthority part of a security ID is invalid for this particular use.
0x00000538  The access control list (ACL) structure is invalid.
0x00000539  The security ID structure is invalid.
0x0000053A  The security descriptor structure is invalid.
0x0000053C  The inherited access control list (ACL) or access control entry (ACE) could not be built.
0x0000053D  The server is currently disabled.
0x0000053E  The server is currently enabled.
0x0000053F  The value provided was an invalid value for an identifier authority.
0x00000540  No more memory is available for security information updates.
0x00000541  The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
0x00000542  Either a required impersonation level was not provided, or the provided impersonation level is invalid.
0x00000543  Cannot open an anonymous level security token.
0x00000544  The validation information class requested was invalid.
0x00000545  The type of the token is inappropriate for its attempted use.
0x00000546  Unable to perform a security operation on an object that has no associated security.
0x00000547  Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.
0x00000548  The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
0x00000549  The domain was in the wrong state to perform the security operation.
0x0000054A  This operation is only allowed for the Primary Domain Controller of the domain.
0x0000054B  The specified domain either does not exist or could not be contacted.
0x0000054C  The specified domain already exists.
0x0000054D  An attempt was made to exceed the limit on the number of domains per server.
0x0000054E  Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
0x0000054F  An internal error occurred.
0x00000550  Generic access types were contained in an access mask which should already be mapped to nongeneric types.
0x00000551  A security descriptor is not in the right format (absolute or self-relative).
0x00000552  The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
0x00000553  Cannot start a new logon session with an ID that is already in use.
0x00000554  A specified authentication package is unknown.
0x00000555  The logon session is not in a state that is consistent with the requested operation.
0x00000556  The logon session ID is already in use.
0x00000557  A logon request contained an invalid logon type value.
0x00000558  Unable to impersonate using a named pipe until data has been read from that pipe.
0x00000559  The transaction state of a registry subtree is incompatible with the requested operation.
0x0000055A  An internal security database corruption has been encountered.
0x0000055B  Cannot perform this operation on built-in accounts.
0x0000055C  Cannot perform this operation on this built-in special group.
0x0000055D  Cannot perform this operation on this built-in special user.
0x0000055E  The user cannot be removed from a group because the group is currently the user's primary group.
0x0000055F  The token is already in use as a primary token.
0x00000560  The specified local group does not exist.
0x00000561  The specified account name is not a member of the group.
0x00000562  The specified account name is already a member of the group.
0x00000563  The specified local group already exists.
0x00000564  Logon failure: the user has not been granted the requested logon type at this computer.
0x00000565  The maximum number of secrets that may be stored in a single system has been exceeded.
0x00000566  The length of a secret exceeds the maximum length allowed.
0x00000567  The local security authority database contains an internal inconsistency.
0x00000568  During a logon attempt, the user's security context accumulated too many security IDs.
0x00000569  Logon failure: the user has not been granted the requested logon type at this computer.
0x0000056A  A cross-encrypted password is necessary to change a user password.
0x0000056B  A member could not be added to or removed from the local group because the member does not exist.
0x0000056C  A new member could not be added to a local group because the member has the wrong account type.
0x0000056D  Too many security IDs have been specified.
0x0000056E  A cross-encrypted password is necessary to change this user password.
0x0000056F  Indicates an ACL contains no inheritable components.
0x00000570  The file or directory is corrupted and unreadable.
0x00000571  The disk structure is corrupted and unreadable.
0x00000572  There is no user session key for the specified logon session.
0x00000573  The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.
0x00000574  Logon Failure: The target account name is incorrect.
0x00000575  Mutual Authentication failed. The server's password is out of date at the domain controller.
0x00000576  There is a time and/or date difference between the client and server.
0x00000577  This operation cannot be performed on the current domain.
0x00000578  Invalid window handle.
0x00000579  Invalid menu handle.
0x0000057A  Invalid cursor handle.
0x0000057B  Invalid accelerator table handle.
0x0000057C  Invalid hook handle.
0x0000057D  Invalid handle to a multiple-window position structure.
0x0000057E  Cannot create a top-level child window.
0x0000057F  Cannot find window class.
0x00000580  Invalid window; it belongs to other thread.
0x00000581  Hot key is already registered.
0x00000582  Class already exists.
0x00000583  Class does not exist.
0x00000584  Class still has open windows.
0x00000585  Invalid index.
0x00000586  Invalid icon handle.
0x00000587  Using private DIALOG window words.
0x00000588  The list box identifier was not found.
0x00000589  No wildcards were found.
0x0000058A  Thread does not have a clipboard open.
0x0000058B  Hot key is not registered.
0x0000058C  The window is not a valid dialog window.
0x0000058D  Control ID not found.
0x0000058E  Invalid message for a combo box because it does not have an edit control.
0x0000058F  The window is not a combo box.
0x00000590  Height must be less than 256.
0x00000591  Invalid device context (DC) handle.
0x00000592  Invalid hook procedure type.
0x00000593  Invalid hook procedure.
0x00000594  Cannot set nonlocal hook without a module handle.
0x00000595  This hook procedure can only be set globally.
0x00000596  The journal hook procedure is already installed.
0x00000597  The hook procedure is not installed.
0x00000598  Invalid message for single-selection list box.
0x00000599  LB_SETCOUNT sent to non-lazy list box.
0x0000059A  This list box does not support tab stops.
0x0000059B  Cannot destroy object created by another thread.
0x0000059C  Child windows cannot have menus.
0x0000059D  The window does not have a system menu.
0x0000059E  Invalid message box style.
0x0000059F  Invalid system-wide (SPI_*) parameter.
0x000005A0  Screen already locked.
0x000005A1  All handles to windows in a multiple-window position structure must have the same parent.
0x000005A2  The window is not a child window.
0x000005A3  Invalid GW_* command.
0x000005A4  Invalid thread identifier.
0x000005A5  Cannot process a message from a window that is not a multiple document interface (MDI) window.
0x000005A6  Popup menu already active.
0x000005A7  The window does not have scroll bars.
0x000005A8  Scroll bar range cannot be greater than MAXLONG.
0x000005A9  Cannot show or remove the window in the way specified.
0x000005AA  Insufficient system resources exist to complete the requested service.
0x000005AB  Insufficient system resources exist to complete the requested service.
0x000005AC  Insufficient system resources exist to complete the requested service.
0x000005AD  Insufficient quota to complete the requested service.
0x000005AE  Insufficient quota to complete the requested service.
0x000005AF  The paging file is too small for this operation to complete.
0x000005B0  A menu item was not found.
0x000005B1  Invalid keyboard layout handle.
0x000005B2  Hook type not allowed.
0x000005B3  This operation requires an interactive window station.
0x000005B4  This operation returned because the timeout period expired.
0x000005B5  Invalid monitor handle.
0x000005B6  Incorrect size argument.
0x000005B7  The symbolic link cannot be followed because its type is disabled.
0x000005B8  This application does not support the current operation on symbolic links.
0x000005B9  Windows was unable to parse the requested XML data.
0x000005BA  An error was encountered while processing an XML digital signature.
0x000005BB  This application must be restarted.
0x000005BC  The caller made the connection request in the wrong routing compartment.
0x000005BD  There was an AuthIP failure when attempting to connect to the remote host.
0x000005BE  Insufficient NVRAM resources exist to complete the requested service. A reboot might be required.
0x000005DC  The event log file is corrupted.
0x000005DD  No event log file could be opened, so the event logging service did not start.
0x000005DE  The event log file is full.
0x000005DF  The event log file has changed between read operations.
0x0000060E  The specified task name is invalid.
0x0000060F  The specified task index is invalid.
0x00000610  The specified thread is already joining a task.
0x00000641  The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
0x00000642  User cancelled installation.
0x00000643  Fatal error during installation.
0x00000644  Installation suspended, incomplete.
0x00000645  This action is only valid for products that are currently installed.
0x00000646  Feature ID not registered.
0x00000647  Component ID not registered.
0x00000648  Unknown property.
0x00000649  Handle is in an invalid state.
0x0000064A  The configuration data for this product is corrupt. Contact your support personnel.
0x0000064B  Component qualifier not present.
0x0000064C  The installation source for this product is not available. Verify that the source exists and that you can access it.
0x0000064D  This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
0x0000064E  Product is uninstalled.
0x0000064F  SQL query syntax invalid or unsupported.
0x00000650  Record field does not exist.
0x00000651  The device has been removed.
0x00000652  Another installation is already in progress. Complete that installation before proceeding with this install.
0x00000653  This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.
0x00000654  This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
0x00000655  There was an error starting the Windows Installer service user interface. Contact your support personnel.
0x00000656  Error opening installation log file. Verify that the specified log file location exists and that you can write to it.
0x00000657  The language of this installation package is not supported by your system.
0x00000658  Error applying transforms. Verify that the specified transform paths are valid.
0x00000659  This installation is forbidden by system policy. Contact your system administrator.
0x0000065A  Function could not be executed.
0x0000065B  Function failed during execution.
0x0000065C  Invalid or unknown table specified.
0x0000065D  Data supplied is of wrong type.
0x0000065E  Data of this type is not supported.
0x0000065F  The Windows Installer service failed to start. Contact your support personnel.
0x00000660  The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder.
0x00000661  This installation package is not supported by this processor type. Contact your product vendor.
0x00000662  Component not used on this computer.
0x00000663  This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.
0x00000664  This update package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer update package.
0x00000665  This update package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
0x00000666  Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel.
0x00000667  Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.
0x00000668  Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator.
0x00000669  The requested operation completed successfully. The system will be restarted so the changes can take effect.
0x0000066A  The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
0x0000066B  The update package is not permitted by software restriction policy.
0x0000066C  One or more customizations are not permitted by software restriction policy.
0x0000066D  The Windows Installer does not permit installation from a Remote Desktop Connection.
0x0000066E  Uninstallation of the update package is not supported.
0x0000066F  The update is not applied to this product.
0x00000670  No valid sequence could be found for the set of updates.
0x00000671  Update removal was disallowed by policy.
0x00000672  The XML update data is invalid.
0x00000673  Windows Installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update.
0x00000674  The Windows Installer service is not accessible in Safe Mode. Please try again when your computer is not in Safe Mode or you can use System Restore to return your machine to a previous good state.
0x00000675  A fail fast exception occurred. Exception handlers will not be invoked and the process will be terminated immediately.
0x000006A4  The string binding is invalid.
0x000006A5  The binding handle is not the correct type.
0x000006A6  The binding handle is invalid.
0x000006A7  The RPC protocol sequence is not supported.
0x000006A8  The RPC protocol sequence is invalid.
0x000006A9  The string universal unique identifier (UUID) is invalid.
0x000006AA  The endpoint format is invalid.
0x000006AB  The network address is invalid.
0x000006AC  No endpoint was found.
0x000006AD  The timeout value is invalid.
0x000006AE  The object universal unique identifier (UUID) was not found.
0x000006AF  The object universal unique identifier (UUID) has already been registered.
0x000006B0  The type universal unique identifier (UUID) has already been registered.
0x000006B1  The RPC server is already listening.
0x000006B2  No protocol sequences have been registered.
0x000006B3  The RPC server is not listening.
0x000006B4  The manager type is unknown.
0x000006B5  The interface is unknown.
0x000006B6  There are no bindings.
0x000006B7  There are no protocol sequences.
0x000006B8  The endpoint cannot be created.
0x000006B9  Not enough resources are available to complete this operation.
0x000006BA  The RPC server is unavailable.
0x000006BB  The RPC server is too busy to complete this operation.
0x000006BC  The network options are invalid.
0x000006BD  There are no remote procedure calls active on this thread.
0x000006BE  The remote procedure call failed.
0x000006BF  The remote procedure call failed and did not execute.
0x000006C0  A remote procedure call (RPC) protocol error occurred.
0x000006C1  Access to the HTTP proxy is denied.
0x000006C2  The transfer syntax is not supported by the RPC server.
0x000006C4  The universal unique identifier (UUID) type is not supported.
0x000006C5  The tag is invalid.
0x000006C6  The array bounds are invalid.
0x000006C7  The binding does not contain an entry name.
0x000006C8  The name syntax is invalid.
0x000006C9  The name syntax is not supported.
0x000006CB  No network address is available to use to construct a universal unique identifier (UUID).
0x000006CC  The endpoint is a duplicate.
0x000006CD  The authentication type is unknown.
0x000006CE  The maximum number of calls is too small.
0x000006CF  The string is too long.
0x000006D0  The RPC protocol sequence was not found.
0x000006D1  The procedure number is out of range.
0x000006D2  The binding does not contain any authentication information.
0x000006D3  The authentication service is unknown.
0x000006D4  The authentication level is unknown.
0x000006D5  The security context is invalid.
0x000006D6  The authorization service is unknown.
0x000006D7  The entry is invalid.
0x000006D8  The server endpoint cannot perform the operation.
0x000006D9  There are no more endpoints available from the endpoint mapper.
0x000006DA  No interfaces have been exported.
0x000006DB  The entry name is incomplete.
0x000006DC  The version option is invalid.
0x000006DD  There are no more members.
0x000006DE  There is nothing to unexport.
0x000006DF  The interface was not found.
0x000006E0  The entry already exists.
0x000006E1  The entry is not found.
0x000006E2  The name service is unavailable.
0x000006E3  The network address family is invalid.
0x000006E4  The requested operation is not supported.
0x000006E5  No security context is available to allow impersonation.
0x000006E6  An internal error occurred in a remote procedure call (RPC).
0x000006E7  The RPC server attempted an integer division by zero.
0x000006E8  An addressing error occurred in the RPC server.
0x000006E9  A floating-point operation at the RPC server caused a division by zero.
0x000006EA  A floating-point underflow occurred at the RPC server.
0x000006EB  A floating-point overflow occurred at the RPC server.
0x000006EC  The list of RPC servers available for the binding of auto handles has been exhausted.
0x000006ED  Unable to open the character translation table file.
0x000006EE  The file containing the character translation table has fewer than 512 bytes.
0x000006EF  A null context handle was passed from the client to the host during a remote procedure call.
0x000006F1  The context handle changed during a remote procedure call.
0x000006F2  The binding handles passed to a remote procedure call do not match.
0x000006F3  The stub is unable to get the remote procedure call handle.
0x000006F4  A null reference pointer was passed to the stub.
0x000006F5  The enumeration value is out of range.
0x000006F6  The byte count is too small.
0x000006F7  The stub received bad data.
0x000006F8  The supplied user buffer is not valid for the requested operation.
0x000006F9  The disk media is not recognized. It may not be formatted.
0x000006FA  The workstation does not have a trust secret.
0x000006FB  The security database on the server does not have a computer account for this workstation trust relationship.
0x000006FC  The trust relationship between the primary domain and the trusted domain failed.
0x000006FD  The trust relationship between this workstation and the primary domain failed.
0x000006FE  The network logon failed.
0x000006FF  A remote procedure call is already in progress for this thread.
0x00000700  An attempt was made to logon, but the network logon service was not started.
0x00000701  The user's account has expired.
0x00000702  The redirector is in use and cannot be unloaded.
0x00000703  The specified printer driver is already installed.
0x00000704  The specified port is unknown.
0x00000705  The printer driver is unknown.
0x00000706  The print processor is unknown.
0x00000707  The specified separator file is invalid.
0x00000708  The specified priority is invalid.
0x00000709  The printer name is invalid.
0x0000070A  The printer already exists.
0x0000070B  The printer command is invalid.
0x0000070C  The specified datatype is invalid.
0x0000070D  The environment specified is invalid.
0x0000070E  There are no more bindings.
0x0000070F  The account used is an interdomain trust account. Use your global user account or local user account to access this server.
0x00000710  The account used is a computer account. Use your global user account or local user account to access this server.
0x00000711  The account used is a server trust account. Use your global user account or local user account to access this server.
0x00000712  The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.
0x00000713  The server is in use and cannot be unloaded.
0x00000714  The specified image file did not contain a resource section.
0x00000715  The specified resource type cannot be found in the image file.
0x00000716  The specified resource name cannot be found in the image file.
0x00000717  The specified resource language ID cannot be found in the image file.
0x00000718  Not enough quota is available to process this command.
0x00000719  No interfaces have been registered.
0x0000071A  The remote procedure call was cancelled.
0x0000071B  The binding handle does not contain all required information.
0x0000071C  A communications failure occurred during a remote procedure call.
0x0000071D  The requested authentication level is not supported.
0x0000071E  No principal name registered.
0x0000071F  The error specified is not a valid Windows RPC error code.
0x00000720  A UUID that is valid only on this computer has been allocated.
0x00000721  A security package specific error occurred.
0x00000722  Thread is not canceled.
0x00000723  Invalid operation on the encoding/decoding handle.
0x00000724  Incompatible version of the serializing package.
0x00000725  Incompatible version of the RPC stub.
0x00000726  The RPC pipe object is invalid or corrupted.
0x00000727  An invalid operation was attempted on an RPC pipe object.
0x00000728  Unsupported RPC pipe version.
0x00000729  HTTP proxy server rejected the connection because the cookie authentication failed.
0x0000076A  The group member was not found.
0x0000076B  The endpoint mapper database entry could not be created.
0x0000076C  The object universal unique identifier (UUID) is the nil UUID.
0x0000076D  The specified time is invalid.
0x0000076E  The specified form name is invalid.
0x0000076F  The specified form size is invalid.
0x00000770  The specified printer handle is already being waited on
0x00000771  The specified printer has been deleted.
0x00000772  The state of the printer is invalid.
0x00000773  The user's password must be changed before logging on the first time.
0x00000774  Could not find the domain controller for this domain.
0x00000775  The referenced account is currently locked out and may not be logged on to.
0x00000776  The object exporter specified was not found.
0x00000777  The object specified was not found.
0x00000778  The object resolver set specified was not found.
0x00000779  Some data remains to be sent in the request buffer.
0x0000077A  Invalid asynchronous remote procedure call handle.
0x0000077B  Invalid asynchronous RPC call handle for this operation.
0x0000077C  The RPC pipe object has already been closed.
0x0000077D  The RPC call completed before all pipes were processed.
0x0000077E  No more data is available from the RPC pipe.
0x0000077F  No site name is available for this machine.
0x00000780  The file cannot be accessed by the system.
0x00000781  The name of the file cannot be resolved by the system.
0x00000782  The entry is not of the expected type.
0x00000783  Not all object UUIDs could be exported to the specified entry.
0x00000784  Interface could not be exported to the specified entry.
0x00000785  The specified profile entry could not be added.
0x00000786  The specified profile element could not be added.
0x00000787  The specified profile element could not be removed.
0x00000788  The group element could not be added.
0x00000789  The group element could not be removed.
0x0000078A  The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
0x0000078B  The context has expired and can no longer be used.
0x0000078C  The current user's delegated trust creation quota has been exceeded.
0x0000078D  The total delegated trust creation quota has been exceeded.
0x0000078E  The current user's delegated trust deletion quota has been exceeded.
0x0000078F  Logon Failure: The machine you are logging onto is protected by an authentication firewall. The specified account is not allowed to authenticate to the machine.
0x00000790  Remote connections to the Print Spooler are blocked by a policy set on your machine.
0x00000791  Logon Failure: Authentication failed because NTLM authentication has been disabled.
0x000007D0  The pixel format is invalid.
0x000007D1  The specified driver is invalid.
0x000007D2  The window style or class attribute is invalid for this operation.
0x000007D3  The requested metafile operation is not supported.
0x000007D4  The requested transformation operation is not supported.
0x000007D5  The requested clipping operation is not supported.
0x000007DA  The specified color management module is invalid.
0x000007DB  The specified color profile is invalid.
0x000007DC  The specified tag was not found.
0x000007DD  A required tag is not present.
0x000007DE  The specified tag is already present.
0x000007DF  The specified color profile is not associated with the specified device.
0x000007E0  The specified color profile was not found.
0x000007E1  The specified color space is invalid.
0x000007E2  Image Color Management is not enabled.
0x000007E3  There was an error while deleting the color transform.
0x000007E4  The specified color transform is invalid.
0x000007E5  The specified transform does not match the bitmap's color space.
0x000007E6  The specified named color index is not present in the profile.
0x000007E7  The specified profile is intended for a device of a different type than the specified device.
0x00000836  The workstation driver is not installed.
0x00000837  The server could not be located.
0x00000838  An internal error occurred.The network cannot access a shared memory segment.
0x00000839  A network resource shortage occurred .
0x0000083A  This operation is not supported on workstations.
0x0000083B  The device is not connected.
0x00000842  The Server service is not started.
0x00000843  The queue is empty.
0x00000844  The device or directory does not exist.
0x00000845  The operation is invalid on a redirected resource.
0x00000846  The name has already been shared.
0x00000847  The server is currently out of the requested resource.
0x00000849  Requested addition of items exceeds the maximum allowed.
0x0000084A  The Peer service supports only two simultaneous users.
0x0000084B  The API return buffer is too small.
0x0000084F  A remote API error occurred.
0x00000853  An error occurred when opening or reading the configuration file.
0x00000858  A general network error occurred.
0x00000859  The Workstation service is in an inconsistent state. Restart the computer before restarting the Workstation service.
0x0000085A  The Workstation service has not been started.
0x0000085B  The requested information is not available.
0x0000085C  An internal Windows error occurred.
0x0000085D  The server is not configured for transactions.
0x0000085E  The requested API is not supported on the remote server.
0x0000085F  The event name is invalid.
0x00000860  The computer name already exists on the network. Change it and restart the computer.
0x00000862  The specified component could not be found in the configuration information.
0x00000863  The specified parameter could not be found in the configuration information.
0x00000865  A line in the configuration file is too long.
0x00000866  The printer does not exist.
0x00000867  The print job does not exist.
0x00000868  The printer destination cannot be found.
0x00000869  The printer destination already exists.
0x0000086A  The printer queue already exists.
0x0000086B  No more printers can be added.
0x0000086C  No more print jobs can be added.
0x0000086D  No more printer destinations can be added.
0x0000086E  This printer destination is idle and cannot accept control operations.
0x0000086F  This printer destination request contains an invalid control function.
0x00000870  The print processor is not responding.
0x00000871  The spooler is not running.
0x00000872  This operation cannot be performed on the print destination in its current state.
0x00000873  This operation cannot be performed on the printer queue in its current state.
0x00000874  This operation cannot be performed on the print job in its current state.
0x00000875  A spooler memory allocation failure occurred.
0x00000876  The device driver does not exist.
0x00000877  The data type is not supported by the print processor.
0x00000878  The print processor is not installed.
0x00000884  The service database is locked.
0x00000885  The service table is full.
0x00000886  The requested service has already been started.
0x00000887  The service does not respond to control actions.
0x00000888  The service has not been started.
0x00000889  The service name is invalid.
0x0000088A  The service is not responding to the control function.
0x0000088B  The service control is busy.
0x0000088C  The configuration file contains an invalid service program name.
0x0000088D  The service could not be controlled in its present state.
0x0000088E  The service ended abnormally.
0x0000088F  The requested pause, continue, or stop is not valid for this service.
0x00000890  The service control dispatcher could not find the service name in the dispatch table.
0x00000891  The service control dispatcher pipe read failed.
0x00000892  A thread for the new service could not be created.
0x00000898  This workstation is already logged on to the local-area network.
0x00000899  The workstation is not logged on to the local-area network.
0x0000089A  The user name or group name parameter is invalid.
0x0000089B  The password parameter is invalid.
0x0000089C  The logon processor did not add the message alias.
0x0000089D  The logon processor did not add the message alias.
0x0000089E  The logoff processor did not delete the message alias.
0x0000089F  The logoff processor did not delete the message alias.
0x000008A1  Network logons are paused.
0x000008A2  A centralized logon-server conflict occurred.
0x000008A3  The server is configured without a valid user path.
0x000008A4  An error occurred while loading or running the logon script.
0x000008A6  The logon server was not specified.Your computer will be logged on as STANDALONE.
0x000008A7  The logon server could not be found.
0x000008A8  There is already a logon domain for this computer.
0x000008A9  The logon server could not validate the logon.
0x000008AB  The security database could not be found.
0x000008AC  The group name could not be found.
0x000008AD  The user name could not be found.
0x000008AE  The resource name could not be found.
0x000008AF  The group already exists.
0x000008B0  The account already exists.
0x000008B1  The resource permission list already exists.
0x000008B2  This operation is only allowed on the primary domain controller of the domain.
0x000008B3  The security database has not been started.
0x000008B4  There are too many names in the user accounts database.
0x000008B5  A disk I/O failure occurred.
0x000008B6  The limit of 64 entries per resource was exceeded.
0x000008B7  Deleting a user with a session is not allowed.
0x000008B8  The parent directory could not be located.
0x000008B9  Unable to add to the security database session cache segment.
0x000008BA  This operation is not allowed on this special group.
0x000008BB  This user is not cached in user accounts database session cache.
0x000008BC  The user already belongs to this group.
0x000008BD  The user does not belong to this group.
0x000008BE  This user account is undefined.
0x000008BF  This user account has expired.
0x000008C0  The user is not allowed to log on from this workstation.
0x000008C1  The user is not allowed to log on at this time.
0x000008C2  The password of this user has expired.
0x000008C3  The password of this user cannot change.
0x000008C4  This password cannot be used now.
0x000008C5  The password does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements.
0x000008C6  The password of this user is too recent to change.
0x000008C7  The security database is corrupted.
0x000008C8  No updates are necessary to this replicant network/local security database.
0x000008C9  This replicant database is outdated; synchronization is required.
0x000008CA  The network connection could not be found.
0x000008CB  This asg_type is invalid.
0x000008CC  This device is currently being shared.
0x000008CD  The user name may not be same as computer name.
0x000008DE  The computer name could not be added as a message alias.The name may already exist on the network.
0x000008DF  The Messenger service is already started.
0x000008E0  The Messenger service failed to start.
0x000008E1  The message alias could not be found on the network.
0x000008E2  This message alias has already been forwarded.
0x000008E3  This message alias has been added but is still forwarded.
0x000008E4  This message alias already exists locally.
0x000008E5  The maximum number of added message aliases has been exceeded.
0x000008E6  The computer name could not be deleted.
0x000008E7  Messages cannot be forwarded back to the same workstation.
0x000008E8  An error occurred in the domain message processor.
0x000008E9  The message was sent, but the recipient has paused the Messenger service.
0x000008EA  The message was sent but not received.
0x000008EB  The message alias is currently in use. Try again later.
0x000008EC  The Messenger service has not been started.
0x000008ED  The name is not on the local computer.
0x000008EE  The forwarded message alias could not be found on the network.
0x000008EF  The message alias table on the remote station is full.
0x000008F0  Messages for this alias are not currently being forwarded.
0x000008F1  The broadcast message was truncated.
0x000008F6  This is an invalid device name.
0x000008F7  A write fault occurred.
0x000008F9  A duplicate message alias exists on the network.
0x000008FA  This message alias will be deleted later.
0x000008FB  The message alias was not successfully deleted from all networks.
0x000008FC  This operation is not supported on computers with multiple networks.
0x00000906  This shared resource does not exist.
0x00000907  This device is not shared.
0x00000908  A session does not exist with that computer name.
0x0000090A  There is not an open file with that identification number.
0x0000090B  A failure occurred when executing a remote administration command.
0x0000090C  A failure occurred when opening a remote temporary file.
0x0000090D  The data returned from a remote administration command has been truncated to 64K.
0x0000090E  This device cannot be shared as both a spooled and a non-spooled resource.
0x0000090F  The information in the list of servers may be incorrect.
0x00000910  The computer is not active in this domain.
0x00000911  The share must be removed from the Distributed File System before it can be deleted.
0x0000091B  The operation is invalid for this device.
0x0000091C  This device cannot be shared.
0x0000091D  This device was not open.
0x0000091E  This device name list is invalid.
0x0000091F  The queue priority is invalid.
0x00000921  There are no shared communication devices.
0x00000922  The queue you specified does not exist.
0x00000924  This list of devices is invalid.
0x00000925  The requested device is invalid.
0x00000926  This device is already in use by the spooler.
0x00000927  This device is already in use as a communication device.
0x0000092F  This computer name is invalid.
0x00000932  The string and prefix specified are too long.
0x00000934  This path component is invalid.
0x00000935  Could not determine the type of input.
0x0000093A  The buffer for types is not big enough.
0x00000942  Profile files cannot exceed 64K.
0x00000943  The start offset is out of range.
0x00000944  The system cannot delete current connections to network resources.
0x00000945  The system was unable to parse the command line in this file.
0x00000946  An error occurred while loading the profile file.
0x00000947  Errors occurred while saving the profile file.The profile was partially saved.
0x00000949  Log file *** is full.
0x0000094A  This log file has changed between reads.
0x0000094B  Log file *** is corrupt.
0x0000094C  The source path cannot be a directory.
0x0000094D  The source path is illegal.
0x0000094E  The destination path is illegal.
0x0000094F  The source and destination paths are on different servers.
0x00000951  The Run server you requested is paused.
0x00000955  An error occurred when communicating with a Run server.
0x00000957  An error occurred when starting a background process.
0x00000958  The shared resource you are connected to could not be found.
0x00000960  The LAN adapter number is invalid.
0x00000961  There are open files on the connection.
0x00000962  Active connections still exist.
0x00000963  This share name or password is invalid.
0x00000964  The device is being accessed by an active process.
0x00000965  The drive letter is in use locally.
0x0000097E  The specified client is already registered for the specified event.
0x0000097F  The alert table is full.
0x00000980  An invalid or nonexistent alert name was raised.
0x00000981  The alert recipient is invalid.
0x00000982  because the user's logon hours are no longer valid.
0x00000988  The log file does not contain the requested record number.
0x00000992  The user accounts database is not configured correctly.
0x00000993  This operation is not permitted when the Netlogon service is running.
0x00000994  This operation is not allowed on the last administrative account.
0x00000995  Could not find domain controller for this domain.
0x00000996  Could not set logon information for this user.
0x00000997  The Netlogon service has not been started.
0x00000998  Unable to add to the user accounts database.
0x00000999  This server's clock is not synchronized with the primary domain controller's clock.
0x0000099A  A password mismatch has been detected.
0x0000099C  The server identification does not specify a valid server.
0x0000099D  The session identification does not specify a valid session.
0x0000099E  The connection identification does not specify a valid connection.
0x0000099F  There is no space for another entry in the table of available servers.
0x000009A0  The server has reached the maximum number of sessions it supports.
0x000009A1  The server has reached the maximum number of connections it supports.
0x000009A2  The server cannot open more files because it has reached its maximum number.
0x000009A3  There are no alternate servers registered on this server.
0x000009A6  Try down-level (remote admin protocol) version of API instead.
0x000009B0  The UPS driver could not be accessed by the UPS service.
0x000009B1  The UPS service is not configured correctly.
0x000009B2  The UPS service could not access the specified Comm Port.
0x000009B3  The UPS indicated a line fail or low battery situation. Service not started.
0x000009B4  The UPS service failed to perform a system shut down.
0x000009C4  The program below returned an MS-DOS error code:
0x000009C5  The program below needs more memory:
0x000009C6  The program below called an unsupported MS-DOS function:
0x000009C7  The workstation failed to boot.
0x000009C8  The file below is corrupt.
0x000009C9  No loader is specified in the boot-block definition file.
0x000009CA  NetBIOS returned an error: The NCB and SMB are dumped above.
0x000009CB  A disk I/O error occurred.
0x000009CC  Image parameter substitution failed.
0x000009CD  Too many image parameters cross disk sector boundaries.
0x000009CE  The image was not generated from an MS-DOS diskette formatted with /S.
0x000009CF  Remote boot will be restarted later.
0x000009D0  The call to the Remoteboot server failed.
0x000009D1  Cannot connect to the Remoteboot server.
0x000009D2  Cannot open image file on the Remoteboot server.
0x000009D3  Connecting to the Remoteboot server...
0x000009D4  Connecting to the Remoteboot server...
0x000009D5  Remote boot service was stopped; check the error log for the cause of the problem.
0x000009D6  Remote boot startup failed; check the error log for the cause of the problem.
0x000009D7  A second connection to a Remoteboot resource is not allowed.
0x000009F6  The browser service was configured with MaintainServerList=No.
0x00000A32  Service failed to start since none of the network adapters started with this service.
0x00000A33  Service failed to start due to bad startup information in the registry.
0x00000A34  Service failed to start because its database is absent or corrupt.
0x00000A35  Service failed to start because RPLFILES share is absent.
0x00000A36  Service failed to start because RPLUSER group is absent.
0x00000A37  Cannot enumerate service records.
0x00000A38  Workstation record information has been corrupted.
0x00000A39  Workstation record was not found.
0x00000A3A  Workstation name is in use by some other workstation.
0x00000A3B  Profile record information has been corrupted.
0x00000A3C  Profile record was not found.
0x00000A3D  Profile name is in use by some other profile.
0x00000A3E  There are workstations using this profile.
0x00000A3F  Configuration record information has been corrupted.
0x00000A40  Configuration record was not found.
0x00000A41  Adapter id record information has been corrupted.
0x00000A42  An internal service error has occurred.
0x00000A43  Vendor id record information has been corrupted.
0x00000A44  Boot block record information has been corrupted.
0x00000A45  The user account for this workstation record is missing.
0x00000A46  The RPLUSER local group could not be found.
0x00000A47  Boot block record was not found.
0x00000A48  Chosen profile is incompatible with this workstation.
0x00000A49  Chosen network adapter id is in use by some other workstation.
0x00000A4A  There are profiles using this configuration.
0x00000A4B  There are workstations, profiles or configurations using this boot block.
0x00000A4C  Service failed to backup Remoteboot database.
0x00000A4D  Adapter record was not found.
0x00000A4E  Vendor record was not found.
0x00000A4F  Vendor name is in use by some other vendor record.
0x00000A50  (boot name, vendor id) is in use by some other boot block record.
0x00000A51  Configuration name is in use by some other configuration.
0x00000A64  The internal database maintained by the DFS service is corrupt
0x00000A65  One of the records in the internal DFS database is corrupt
0x00000A66  There is no DFS name whose entry path matches the input Entry Path
0x00000A67  A root or link with the given name already exists
0x00000A68  The server share specified is already shared in the DFS
0x00000A69  The indicated server share does not support the indicated DFS namespace
0x00000A6A  The operation is not valid on this portion of the namespace
0x00000A6B  The operation is not valid on this portion of the namespace
0x00000A6C  The operation is ambiguous because the link has multiple servers
0x00000A6D  Unable to create a link
0x00000A6E  The server is not DFS Aware
0x00000A6F  The specified rename target path is invalid
0x00000A70  The specified DFS link is offline
0x00000A71  The specified server is not a server for this link
0x00000A72  A cycle in the DFS name was detected
0x00000A73  The operation is not supported on a server-based DFS
0x00000A74  This link is already supported by the specified server-share
0x00000A75  Can't remove the last server-share supporting this root or link
0x00000A76  The operation is not supported for an Inter-DFS link
0x00000A77  The internal state of the DFS Service has become inconsistent
0x00000A78  The DFS Service has been installed on the specified server
0x00000A79  The DFS data being reconciled is identical
0x00000A7A  The DFS root cannot be deleted - Uninstall DFS if required
0x00000A7B  A child or parent directory of the share is already in a DFS
0x00000A82  DFS internal error
0x00000A83  This machine is already joined to a domain.
0x00000A84  This machine is not currently joined to a domain.
0x00000A85  This machine is a domain controller and cannot be unjoined from a domain.
0x00000A86  The destination domain controller does not support creating machine accounts in OUs.
0x00000A87  The specified workgroup name is invalid.
0x00000A88  The specified computer name is incompatible with the default language used on the domain controller.
0x00000A89  The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted unjoin, reboot, and rejoin the domain.
0x00000A8A  This version of Windows cannot be joined to a domain.
0x00000A8B  An attempt to resolve the DNS name of a domain controller in the domain being joined has failed.Please verify this client is configured to reach a DNS server that can resolve DNS names in the target domain. For information about network troubleshooting, see Windows Help.
0x00000A8D  Password must change at next logon
0x00000A8E  Account is locked out
0x00000A8F  Password is too long
0x00000A90  Password doesn't meet the complexity policy
0x00000A91  Password doesn't meet the requirements of the filter dll's
0x00000A95  Offline join completion information was not found.
0x00000A96  The offline join completion information was bad.
0x00000A97  Unable to create offline join information. Please ensure you have access to the specified path location and permissions to modify its contents. Running as an elevated administrator may be required.
0x00000A98  The domain join info being saved was incomplete or bad.
0x00000A99  Offline join operation successfully completed but a restart is needed.
0x00000A9A  There was no offline join operation pending.
0x00000A9B  Unable to set one or more requested machine or domain name values on the local computer.
0x00000A9C  Could not verify the current machine's hostname against the saved value in the join completion information.
0x00000A9D  Unable to load the specified offline registry hive. Please ensure you have access to the specified path location and permissions to modify its contents. Running as an elevated administrator may be required.
0x00000A9E  The minimum session security requirements for this operation were not met.
0x00000A9F  Computer account provisioning blob version is not supported.
0x00000BB7  This is the last error in NERR range.
0x00000BB8  The specified print monitor is unknown.
0x00000BB9  The specified printer driver is currently in use.
0x00000BBA  The spool file was not found.
0x00000BBB  A StartDocPrinter call was not issued.
0x00000BBC  An AddJob call was not issued.
0x00000BBD  The specified print processor has already been installed.
0x00000BBE  The specified print monitor has already been installed.
0x00000BBF  The specified print monitor does not have the required functions.
0x00000BC0  The specified print monitor is currently in use.
0x00000BC1  The requested operation is not allowed when there are jobs queued to the printer.
0x00000BC2  The requested operation is successful. Changes will not be effective until the system is rebooted.
0x00000BC3  The requested operation is successful. Changes will not be effective until the service is restarted.
0x00000BC4  No printers were found.
0x00000BC5  The printer driver is known to be unreliable.
0x00000BC6  The printer driver is known to harm the system.
0x00000BC7  The specified printer driver package is currently in use.
0x00000BC8  Unable to find a core driver package that is required by the printer driver package.
0x00000BC9  The requested operation failed. A system reboot is required to roll back changes made.
0x00000BCA  The requested operation failed. A system reboot has been initiated to roll back changes made.
0x00000BCB  The specified printer driver was not found on the system and needs to be downloaded.
0x00000BCC  The requested print job has failed to print. A print system update requires the job to be resubmitted.
0x00000BCD  Power has been restored at ***.The server is no longer paused.
0x00000BCE  The UPS service is starting shut down at *** due to low battery.
0x00000BCF  shut down command file.The UPS service started anyway.
0x00000BD1  The hotfix occurred while processing a remote request.
0x00000BD2  The error occurred while processing a remote request.
0x00000BD3  Any updates made to the database after this time are lost.
0x00000BD4  Any updates made to the database after this time are lost.
0x00000BD5  THE SYSTEM IS NOT SECURE.
0x00000BD6  It is exported from another server.
0x00000BD7  on *** due to error ***.
0x00000BD8  time.
0x00000BD9  User *** has exceeded account limitation *** on server ***.
0x00000BDA  The primary domain controller for domain *** failed.
0x00000BDB  domain ***.
0x00000BDC  The replicator attempted to log on at *** as *** and failed.
0x00000BDD  @I *LOGON HOURS
0x00000BDE  on *** due to system error ***.
0x00000BDF  Replicator limit for files in a directory has been exceeded.
0x00000BE0  Replicator limit for tree depth has been exceeded.
0x00000BE1  and is the current directory for some process.
0x00000BE2  Network error *** occurred.
0x00000BE5  System error *** occurred.
0x00000BE6  is set to NO.
0x00000BE7  IMPORT path *** cannot be found.
0x00000BE8  EXPORT path *** cannot be found.
0x00000BE9  Replicated data has changed in directory ***.
0x00000BEA  *** system error.
0x00000BEB  value for "***".
0x00000BEC  line or in the configuration file.
0x00000BED  LAN Manager does not recognize "***" as a valid option.
0x00000BEE  A request for resource could not be satisfied.
0x00000BEF  A problem exists with the system configuration.
0x00000BF0  A system error has occurred.
0x00000BF1  An internal consistency error has occurred.
0x00000BF2  The configuration file or the command line has an ambiguous option.
0x00000BF3  The configuration file or the command line has a duplicate parameter.
0x00000BF4  the DosKillProc function.
0x00000BF5  An error occurred when attempting to run the service program.
0x00000BF6  The sub-service failed to start.
0x00000BF7  There is a conflict in the value or use of these options: ***.
0x00000BF8  There is a problem with the file.
0x00000BFE  memory
0x00000BFF  disk space
0x00000C00  thread
0x00000C01  process
0x00000C02  Security Failure.
0x00000C03  Bad or missing LAN Manager root directory.
0x00000C04  The network software is not installed.
0x00000C05  The server is not started.
0x00000C06  The server cannot access the user accounts database (NET.ACC).
0x00000C07  Incompatible files are installed in the LANMAN tree.
0x00000C08  The LANMAN\LOGS directory is invalid.
0x00000C09  The domain specified could not be used.
0x00000C0A  The computer name is being used as a message alias on another computer.
0x00000C0B  The announcement of the server name failed.
0x00000C0C  The user accounts database is not configured correctly.
0x00000C0D  The server is not running with user-level security.
0x00000C0F  The workstation is not configured properly.
0x00000C10  View your error log for details.
0x00000C11  Unable to write to this file.
0x00000C12  and reapply all ADDPAKs.
0x00000C13  The LM386 server cannot be started because CACHE.EXE is not running.
0x00000C14  There is no account for this computer in the security database.
0x00000C15  This computer is not a member of the group SERVERS.
0x00000C16  The group SERVERS is not present in the local security database.
0x00000C17  configuration.
0x00000C18  The primary Domain Controller for this domain could not be located.
0x00000C19  NET HELP LOCALGROUP describes the options for this command.
0x00000C1A  The service failed to authenticate with the primary domain controller.
0x00000C1B  There is a problem with the security database creation date or serial number.
0x00000C1C  The operation failed because a network software error occurred.
0x00000C1D  [\\computername] [/DELETE] [/LIST]
0x00000C1E  segment for network control blocks (NCBs). The error code is the data.
0x00000C1F  segment for network control blocks (NCBs). The error code is the data.
0x00000C20  sharename \\computername /DELETE
0x00000C22  An unexpected network control block (NCB) was received. The NCB is the data.
0x00000C23  The network is not started.
0x00000C24  WORD ioctl or fsctl number
0x00000C25  This command has no options.
0x00000C26  NET START CLIPBOOK
0x00000C27  The error code is the data.
0x00000C28  The SMB is the data.
0x00000C29  NET START EVENTLOG
0x00000C2A  overflow.
0x00000C30  than net buffers are sized so that too much memory is needed.
0x00000C31  The server cannot increase the size of a memory segment.
0x00000C32  NET START RPCLOCATOR
0x00000C34  parameters must be zero or all three must be nonzero.
0x00000C35  NET START RPCSS
0x00000C37  This command has no options.
0x00000C38  NET START SCHEDULE
0x00000C39  is corrupted.
0x00000C3A  NetIMakeLMFileName. The error code is the data.
0x00000C3B  NET START SERVER
0x00000C3C  Check swap disk's free space and restart the system to start the server.
0x00000C44  in raw data.
0x00000C45  Message server shared data segment.
0x00000C4F  The error code is the data.
0x00000C50  An illegal server message block (SMB) was received.The SMB is the data.
0x00000C58  The size follows, in DWORD format:
0x00000C59  The workstation was unable to get the name-number of the computer.
0x00000C5A  The error code is the data.
0x00000C5B  The error code is the data.
0x00000C5C  The workstation host table is full.
0x00000C5D  A bad mailslot server message block (SMB) was received.The SMB is the data.
0x00000C5E  The error code is the data.
0x00000C5F  The function code and the error codes are the data.
0x00000C62  alert recipients.The error code is ***.
0x00000C63  splitting the group into two or more smaller groups.
0x00000C64  different types of names Windows uses. It is not a NET command.
0x00000C65  For more information on tools see the command-line reference in the online help.
0x00000C66  The server could not read the AT schedule file.
0x00000C67  The server found an invalid AT schedule record.
0x00000C68  The server could not find an AT schedule file so it created one.
0x00000C69  The server could not access the *** network with NetBiosOpen.
0x00000C6A  The AT command processor could not run ***.
0x00000C6C  contains some corrupted data.The cache is stopped.
0x00000C6D  The hotfix occurred while processing a remote request.
0x00000C6E  The error occurred while processing a remote request.
0x00000C6F  Any updates made to the database after this time are lost.
0x00000C70  Any updates made to the database made after this time are lost.
0x00000C71  THE SYSTEM IS NOT SECURE.
0x00000C72  THE SYSTEM IS NOT SECURE.
0x00000C76  ***
0x00000C77  The redirector is out of a resource: ***.
0x00000C78  The SMB header is the data.
0x00000C79  The network control block (NCB) command and return code is the data.
0x00000C7A  Hanging up a stuck session to ***.
0x00000C7B  The NCB is the data.
0x00000C7C  Data may have been lost.
0x00000C7D  The NCB is the data.
0x00000C7E  than the maximum. The maximum amount was allocated.
0x00000C84  The THREADS parameter in the CONFIG.SYS file should be increased.
0x00000C85  The file is probably corrupted.
0x00000C86  and is the current directory for some process.
0x00000C87  It is exported from another server.
0x00000C88  on *** due to error ***.
0x00000C89  time.
0x00000C8A  administrator.
0x00000C8B  The replicator attempted to log on at *** as *** and failed.
0x00000C8C  Network error *** occurred.
0x00000C8D  Replicator limit for files in a directory has been exceeded.
0x00000C8E  Replicator limit for tree depth has been exceeded.
0x00000C8F  Unrecognized message received in mailslot.
0x00000C90  System error *** occurred.
0x00000C91  is set to NO.
0x00000C92  IMPORT path *** cannot be found.
0x00000C93  EXPORT path *** cannot be found.
0x00000C94  *** system error.
0x00000C95  ***
0x00000C96  on *** due to system error ***.
0x00000C97  The primary domain controller for domain *** has apparently failed.
0x00000C98  ***
0x00000C99  An error occurred while updating the logon or logoff information for ***.
0x00000C9A  An error occurred while synchronizing with primary domain controller ***
0x00000C9B  registry entry on this machine to 0.
0x00000C9E  A power failure was detected at the server.
0x00000C9F  The UPS service performed server shut down.
0x00000CA0  user specified shut down command file.
0x00000CA1  the data.
0x00000CA2  Power has been restored.
0x00000CA3  shut down command file.
0x00000CA4  command file ***.The error code is the data.
0x00000CB2  parameter in the configuration file ***.
0x00000CB3  configuration file ***. The invalid line is the data.
0x00000CB4  file ***.
0x00000CB5  The boot-block loading was temporarily terminated.
0x00000CB6  of the files.
0x00000CB7  library *** returned an incorrect version number.
0x00000CB8  link library of the service.
0x00000CB9  The error code is the data.
0x00000CBA  is more than 64K.
0x00000CBB  system crashed while working on the error log.
0x00000CBC  This computer has been successfully joined to domain '***'.
0x00000CBD  This computer has been successfully joined to workgroup '***'.
0x00000CE3  *** *** *** *** *** *** *** *** ***.
0x00000CE5  Remote IPC
0x00000CE6  Remote Admin
0x00000CE7  Logon server share
0x00000CE8  A network error occurred.
0x00000D48  There is not enough memory to start the Workstation service.
0x00000D49  An error occurred when reading the NETWORKS entry in the LANMAN.INI file.
0x00000D4A  This is an invalid argument: ***.
0x00000D4B  syntax error and will be ignored.
0x00000D4C  There are too many NETWORKS entries in the LANMAN.INI file.
0x00000D4E  device driver *** = ***.
0x00000D4F  Device driver *** sent a bad BiosLinkage response.
0x00000D50  The program cannot be used with this operating system.
0x00000D51  The redirector is already installed.
0x00000D52  Installing NETWKSTA.SYS Version ***.***.***(***)
0x00000D53  Press ENTER to continue.
0x00000D54  Resolver linkage problem.
0x00000D55  Please clean up and log off.
0x00000D56  You will be automatically disconnected at ***.
0x00000D57  Your logon time at *** has ended.
0x00000D58  Your logon time at *** ended at ***.
0x00000D59  have open may lose data.
0x00000D5A  two minutes to log off, or you will be disconnected.
0x00000D5B  disconnection may cause you to lose data.
0x00000D5C  Default Share for Internal Use
0x00000D5D  Messenger Service
0x00000DAC  The command completed successfully.
0x00000DAD  You used an invalid option.
0x00000DAE  System error *** has occurred.
0x00000DAF  The command contains an invalid number of arguments.
0x00000DB0  The command completed with one or more errors.
0x00000DB1  You used an option with an invalid value.
0x00000DB2  The option *** is unknown.
0x00000DB3  Option *** is ambiguous.
0x00000DB6  A command was used with conflicting switches.
0x00000DB7  Could not find subprogram ***.
0x00000DB8  system.
0x00000DB9  More data is available than can be returned by Windows.
0x00000DBA  More help is available by typing NET HELPMSG ***.
0x00000DBB  This command can be used only on a Windows Domain Controller.
0x00000DBC  This command cannot be used on a Windows Domain Controller.
0x00000DC0  These Windows services are started:
0x00000DC1  The *** service is not started.
0x00000DC2  The *** service is starting
0x00000DC3  The *** service could not be started.
0x00000DC4  The *** service was started successfully.
0x00000DC5  Stopping the Workstation service also stops the Server service.
0x00000DC6  The workstation has open files.
0x00000DC7  The *** service is stopping
0x00000DC8  The *** service could not be stopped.
0x00000DC9  The *** service was stopped successfully.
0x00000DCA  Stopping the *** service will also stop these services.
0x00000DCD  The service is starting or stopping.Please try again later.
0x00000DCE  The service did not report an error.
0x00000DCF  An error occurred controlling the device.
0x00000DD0  The *** service was continued successfully.
0x00000DD1  The *** service was paused successfully.
0x00000DD2  The *** service failed to resume.
0x00000DD3  The *** service failed to pause.
0x00000DD4  The *** service continue is pending
0x00000DD5  The *** service pause is pending
0x00000DD6  *** was continued successfully.
0x00000DD7  *** was paused successfully.
0x00000DD8  The *** service has been started by another process and is pending.
0x00000DDB  A service specific error occurred: ***.
0x00000E4C  These workstations have sessions on this server:
0x00000E4D  These workstations have sessions with open files on this server:
0x00000E52  The message alias is forwarded.
0x00000E56  You have these remote connections:
0x00000E57  Continuing will cancel the connections.
0x00000E5B  The session from *** has open files.
0x00000E5C  New connections will be remembered.
0x00000E5D  New connections will not be remembered.
0x00000E5E  An error occurred while saving your profile : Access Denied. The state of your remembered connections has not changed.
0x00000E5F  An error occurred while reading your profile.
0x00000E60  An error occurred while restoring the connection to ***.
0x00000E62  No network services are started.
0x00000E63  There are no entries in the list.
0x00000E68  Users have open files on ***.Continuing the operation will force the files closed.
0x00000E69  The Workstation service is already running. Windows will ignore command options for the workstation.
0x00000E6B  There are open files and/or incomplete directory searches pending on the connection to ***.
0x00000E6D  The request will be processed at a domain controller for domain ***.
0x00000E6E  The shared queue cannot be deleted while a print job is being spooled to the queue.
0x00000E6F  *** has a remembered connection to ***.
0x00000E7E  An error occurred while opening the Help file.
0x00000E7F  The Help file is empty.
0x00000E80  The Help file is corrupted.
0x00000E81  Could not find a domain controller for domain ***.
0x00000E82  versions of the software.
0x00000E84  The device type is unknown.
0x00000E85  The log file has been corrupted.
0x00000E86  Program filenames must end with .EXE.
0x00000E87  A matching share could not be found so nothing was deleted.
0x00000E88  A bad value is in the units-per-week field of the user record.
0x00000E89  The password is invalid for ***.
0x00000E8A  An error occurred while sending a message to ***.
0x00000E8B  The password or user name is invalid for ***.
0x00000E8D  An error occurred when the share was deleted.
0x00000E8E  The user name is invalid.
0x00000E8F  The password is invalid.
0x00000E90  The passwords do not match.
0x00000E91  Your persistent connections were not all restored.
0x00000E92  This is not a valid computer name or domain name.
0x00000E94  Default permissions cannot be set for that resource.
0x00000E96  A valid password was not entered.
0x00000E97  A valid name was not entered.
0x00000E98  The resource named cannot be shared.
0x00000E99  The permissions string contains invalid permissions.
0x00000E9A  You can only perform this operation on printers and communication devices.
0x00000E9E  *** is an invalid user or group name.
0x00000E9F  The server is not configured for remote administration.
0x00000EA8  No users have sessions with this server.
0x00000EA9  User *** is not a member of group ***.
0x00000EAA  User *** is already a member of group ***.
0x00000EAB  There is no such user: ***.
0x00000EAC  This is an invalid response.
0x00000EAD  No valid response was provided.
0x00000EAE  The destination list provided does not match the destination list of the printer queue.
0x00000EAF  Your password cannot be changed until ***.
0x00000EB0  *** is not a recognized day of the week.
0x00000EB1  The time range specified ends before it starts.
0x00000EB2  *** is not a recognized hour.
0x00000EB3  *** is not a valid specification for minutes.
0x00000EB4  Time supplied is not exactly on the hour.
0x00000EB5  12 and 24 hour time formats may not be mixed.
0x00000EB6  *** is not a valid 12-hour suffix.
0x00000EB7  An illegal date format has been supplied.
0x00000EB8  An illegal day range has been supplied.
0x00000EB9  An illegal time range has been supplied.
0x00000EBA  length and/or arguments supplied.
0x00000EBB  The value for ENABLESCRIPT must be YES.
0x00000EBD  An illegal country code has been supplied.
0x00000EBE  to the USERS local group.
0x00000EBF  The user context supplied is invalid.
0x00000EC0  occurred while trying to use it.
0x00000EC1  Sending files is no longer supported.
0x00000EC2  You may not specify paths for ADMIN$ and IPC$ shares.
0x00000EC3  User or group *** is already a member of local group ***.
0x00000EC4  There is no such user or group: ***.
0x00000EC5  There is no such computer: ***.
0x00000EC6  The computer *** already exists.
0x00000EC7  There is no such global user or group: ***.
0x00000EC8  Only disk shares can be marked as cacheable
0x00000ECE  The system could not find message: ***.
0x00000EDA  This schedule date is invalid.
0x00000EDB  The LANMAN root directory is unavailable.
0x00000EDC  The SCHED.LOG file could not be opened.
0x00000EDD  The Server service has not been started.
0x00000EDE  The AT job ID does not exist.
0x00000EDF  The AT schedule file is corrupted.
0x00000EE0  The delete failed due to a problem with the AT schedule file.
0x00000EE1  The command line cannot exceed 259 characters.
0x00000EE2  The AT schedule file could not be updated because the disk is full.
0x00000EE4  The AT schedule file is invalid.Please delete the file and create a new one.
0x00000EE5  The AT schedule file was deleted.
0x00000EE6  You can specify the time in the 24 hour HH:MM format.
0x00000EE7  Please try again later.
0x00000EE8  than the maximum password age.
0x00000EE9  with servers with down-level software. Please specify a lower value.
0x00000F1E  *** is not a valid computer name.
0x00000F1F  *** is not a valid Windows network message number.
0x00000F3C  Message from *** to *** on ***
0x00000F3D  ****
0x00000F3E  **** unexpected end of message ****
0x00000F41  Press ESC to exit
0x00000F42  ...
0x00000F46  Current time at *** is ***
0x00000F47  time at ***? ***:
0x00000F48  Could not locate a time-server.
0x00000F49  Could not find the domain controller for domain ***.
0x00000F4A  Local time (GMT***) at *** is ***
0x00000F4B  The user's home directory could not be determined.
0x00000F4C  The user's home directory has not been specified.
0x00000F4D  The name specified for the user's home directory (***) is not a universal naming convention (UNC) name.
0x00000F4E  Drive *** is now connected to ***. Your home directory is ***\***.
0x00000F4F  Drive *** is now connected to ***.
0x00000F50  There are no available drive letters left.
0x00000F5C  *** is not a valid domain or workgroup name.
0x00000F5F  The current SNTP value is: ***
0x00000F60  This computer is not currently configured to use a specific SNTP server.
0x00000F61  This current autoconfigured SNTP value is: ***
0x00000F6E  Reissue the given operation as a cached IO operation
0x00000F6F  You specified too many values for the *** option.
0x00000F70  You entered an invalid value for the *** option.
0x00000F71  The syntax is incorrect.
0x00000F78  You specified an invalid file number.
0x00000F79  You specified an invalid print job number.
0x00000F7B  The user or group account specified cannot be found.
0x00000F7D  Services for NetWare.
0x00000F7E  File and Print Services for NetWare is not installed.
0x00000F7F  Cannot set user properties for File and Print Services for NetWare.
0x00000F80  Password for *** is: ***
0x00000F81  NetWare compatible logon
0x00000FA0  WINS encountered an error while processing the command.
0x00000FA1  The local WINS cannot be deleted.
0x00000FA2  The importation from the file failed.
0x00000FA3  The backup failed. Was a full backup done before?
0x00000FA4  The backup failed. Check the directory to which you are backing the database.
0x00000FA5  The name does not exist in the WINS database.
0x00000FA6  Replication with a nonconfigured partner is not allowed.
0x00000FD2  The version of the supplied content information is not supported.
0x00000FD3  The supplied content information is malformed.
0x00000FD4  The requested data cannot be found in local or peer caches.
0x00000FD5  No more data is available or required.
0x00000FD6  The supplied object has not been initialized.
0x00000FD7  The supplied object has already been initialized.
0x00000FD8  A shutdown operation is already in progress.
0x00000FD9  The supplied object has already been invalidated.
0x00000FDA  An element already exists and was not replaced.
0x00000FDB  Can not cancel the requested operation as it has already been completed.
0x00000FDC  Can not perform the reqested operation because it has already been carried out.
0x00000FDD  An operation accessed data beyond the bounds of valid data.
0x00000FDE  The requested version is not supported.
0x00000FDF  A configuration value is invalid.
0x00000FE0  The SKU is not licensed.
0x00000FE1  PeerDist Service is still initializing and will be available shortly.
0x00001004  The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address.
0x00001068  The GUID passed was not recognized as valid by a WMI data provider.
0x00001069  The instance name passed was not recognized as valid by a WMI data provider.
0x0000106A  The data item ID passed was not recognized as valid by a WMI data provider.
0x0000106B  The WMI request could not be completed and should be retried.
0x0000106C  The WMI data provider could not be located.
0x0000106D  The WMI data provider references an instance set that has not been registered.
0x0000106E  The WMI data block or event notification has already been enabled.
0x0000106F  The WMI data block is no longer available.
0x00001070  The WMI data service is not available.
0x00001071  The WMI data provider failed to carry out the request.
0x00001072  The WMI MOF information is not valid.
0x00001073  The WMI registration information is not valid.
0x00001074  The WMI data block or event notification has already been disabled.
0x00001075  The WMI data item or data block is read only.
0x00001076  The WMI data item or data block could not be changed.
0x000010CC  The media identifier does not represent a valid medium.
0x000010CD  The library identifier does not represent a valid library.
0x000010CE  The media pool identifier does not represent a valid media pool.
0x000010CF  The drive and medium are not compatible or exist in different libraries.
0x000010D0  The medium currently exists in an offline library and must be online to perform this operation.
0x000010D1  The operation cannot be performed on an offline library.
0x000010D2  The library, drive, or media pool is empty.
0x000010D3  The library, drive, or media pool must be empty to perform this operation.
0x000010D4  No media is currently available in this media pool or library.
0x000010D5  A resource required for this operation is disabled.
0x000010D6  The media identifier does not represent a valid cleaner.
0x000010D7  The drive cannot be cleaned or does not support cleaning.
0x000010D8  The object identifier does not represent a valid object.
0x000010D9  Unable to read from or write to the database.
0x000010DA  The database is full.
0x000010DB  The medium is not compatible with the device or media pool.
0x000010DC  The resource required for this operation does not exist.
0x000010DD  The operation identifier is not valid.
0x000010DE  The media is not mounted or ready for use.
0x000010DF  The device is not ready for use.
0x000010E0  The operator or administrator has refused the request.
0x000010E1  The drive identifier does not represent a valid drive.
0x000010E2  Library is full. No slot is available for use.
0x000010E3  The transport cannot access the medium.
0x000010E4  Unable to load the medium into the drive.
0x000010E5  Unable to retrieve the drive status.
0x000010E6  Unable to retrieve the slot status.
0x000010E7  Unable to retrieve status about the transport.
0x000010E8  Cannot use the transport because it is already in use.
0x000010E9  Unable to open or close the inject/eject port.
0x000010EA  Unable to eject the medium because it is in a drive.
0x000010EB  A cleaner slot is already reserved.
0x000010EC  A cleaner slot is not reserved.
0x000010ED  The cleaner cartridge has performed the maximum number of drive cleanings.
0x000010EE  Unexpected on-medium identifier.
0x000010EF  The last remaining item in this group or resource cannot be deleted.
0x000010F0  The message provided exceeds the maximum size allowed for this parameter.
0x000010F1  The volume contains system or paging files.
0x000010F2  The media type cannot be removed from this library since at least one drive in the library reports it can support this media type.
0x000010F3  This offline media cannot be mounted on this system since no enabled drives are present which can be used.
0x000010F4  A cleaner cartridge is present in the tape library.
0x000010F5  Cannot use the inject/eject port because it is not empty.
0x000010F6  Error
0x000010F7  OK
0x000010F8  Y
0x000010F9  N
0x000010FA  Any
0x000010FB  A
0x000010FC  P
0x000010FD  (not found)
0x000010FE  This file is currently not available for use on this computer.
0x000010FF  The remote storage service is not operational at this time.
0x00001100  The remote storage service encountered a media error.
0x00001101  Read
0x00001102  Change
0x00001103  Full
0x00001104  Please type the password:
0x00001105  Type the password for ***:
0x00001106  Type a password for the user:
0x00001107  Type the password for the shared resource:
0x00001108  Type your password:
0x00001109  Retype the password to confirm:
0x0000110A  Type the user's old password:
0x0000110B  Type the user's new password:
0x0000110C  Type your new password:
0x0000110D  Type the Replicator service password:
0x0000110E  Type your user name, or press ENTER if it is ***:
0x0000110F  press ENTER if it is for domain ***:
0x00001110  Type your user name:
0x00001111  Network statistics for \\***
0x00001112  Printing options for ***
0x00001113  Communication-device queues accessing ***
0x00001114  Print job detail
0x00001115  Communication-device queues at \\***
0x00001116  Printers at ***
0x00001117  Printers accessing ***
0x00001118  Print jobs at ***:
0x00001119  Shared resources at ***
0x0000111A  The following running services can be controlled:
0x0000111B  Statistics are available for the following running services:
0x0000111C  User accounts for \\***
0x0000111D  The syntax of this command is:
0x0000111E  The options of this command are:
0x0000111F  Please enter the name of the Primary Domain Controller:
0x00001120  is ***, please reenter.
0x00001121  Sunday
0x00001122  Monday
0x00001123  Tuesday
0x00001124  Wednesday
0x00001125  Thursday
0x00001126  The file or directory is not a reparse point.
0x00001127  The reparse point attribute cannot be set because it conflicts with an existing attribute.
0x00001128  The data present in the reparse point buffer is invalid.
0x00001129  The tag present in the reparse point buffer is invalid.
0x0000112A  There is a mismatch between the tag specified in the request and the tag present in the reparse point.
0x0000112B  W
0x0000112C  Th
0x0000112D  F
0x0000112E  S
0x0000112F  Sa
0x00001130  Group Accounts for \\***
0x00001131  Group name
0x00001132  Comment
0x00001133  Members
0x00001135  Aliases for \\***
0x00001136  Alias name
0x00001137  Comment
0x00001138  Members
0x0000113A  User Accounts for \\***
0x0000113B  User name
0x0000113C  Full Name
0x0000113D  Comment
0x0000113E  User's comment
0x0000113F  Parameters
0x00001140  Country code
0x00001141  Privilege level
0x00001142  Operator privileges
0x00001143  Account active
0x00001144  Account expires
0x00001145  Password last set
0x00001146  Password expires
0x00001147  Password changeable
0x00001148  Workstations allowed
0x00001149  Maximum disk space
0x0000114A  Unlimited
0x0000114B  Local Group Memberships
0x0000114C  Domain controller
0x0000114D  Logon script
0x0000114E  Last logon
0x0000114F  Global Group memberships
0x00001150  Logon hours allowed
0x00001151  All
0x00001152  None
0x00001153  Daily *** - ***
0x00001154  Home directory
0x00001155  Password required
0x00001156  User may change password
0x00001157  User profile
0x00001158  Locked
0x00001162  Computer name
0x00001163  User name
0x00001164  Software version
0x00001165  Workstation active on
0x00001166  Windows NT root directory
0x00001167  Workstation domain
0x00001168  Logon domain
0x00001169  Other domain(s)
0x0000116A  COM Open Timeout (sec)
0x0000116B  COM Send Count (byte)
0x0000116C  COM Send Timeout (msec)
0x0000116D  DOS session print time-out (sec)
0x0000116E  Maximum error log size (K)
0x0000116F  Maximum cache memory (K)
0x00001170  Number of network buffers
0x00001171  Number of character buffers
0x00001172  Size of network buffers
0x00001173  Size of character buffers
0x00001174  Full Computer name
0x00001175  Workstation Domain DNS Name
0x00001176  Windows 2002
0x00001181  Server Name
0x00001182  Server Comment
0x00001183  Send administrative alerts to
0x00001184  Software version
0x00001185  Peer Server
0x00001186  Windows NT
0x00001187  Server Level
0x00001188  Windows NT Server
0x00001189  Server is active on
0x0000118C  Server hidden
0x00001194  Single Instance Storage is not available on this volume.
0x0000119A  Maximum Logged On Users
0x0000119B  Maximum concurrent administrators
0x0000119C  Maximum resources shared
0x0000119D  Maximum connections to resources
0x0000119E  Maximum open files on server
0x0000119F  Maximum open files per session
0x000011A0  Maximum file locks
0x000011A8  Idle session time (min)
0x000011AE  Share-level
0x000011AF  User-level
0x000011B2  Unlimited Server
0x000011DA  Force user logoff how long after time expires?:
0x000011DB  Lock out account after how many bad passwords?:
0x000011DC  Minimum password age (days):
0x000011DD  Maximum password age (days):
0x000011DE  Minimum password length:
0x000011DF  Length of password history maintained:
0x000011E0  Computer role:
0x000011E1  Primary Domain controller for workstation domain:
0x000011E2  Lockout threshold:
0x000011E3  Lockout duration (minutes):
0x000011E4  Lockout observation window (minutes):
0x000011F8  Statistics since
0x000011F9  Sessions accepted
0x000011FA  Sessions timed-out
0x000011FB  Sessions errored-out
0x000011FC  Kilobytes sent
0x000011FD  Kilobytes received
0x000011FE  Mean response time (msec)
0x000011FF  Network errors
0x00001200  Files accessed
0x00001201  Print jobs spooled
0x00001202  System errors
0x00001203  Password violations
0x00001204  Permission violations
0x00001205  Communication devices accessed
0x00001206  Sessions started
0x00001207  Sessions reconnected
0x00001208  Sessions starts failed
0x00001209  Sessions disconnected
0x0000120A  Network I/O's performed
0x0000120B  Files and pipes accessed
0x0000120C  Times buffers exhausted
0x0000120D  Big buffers
0x0000120E  Request buffers
0x0000120F  Workstation Statistics for \\***
0x00001210  Server Statistics for \\***
0x00001211  Statistics since ***
0x00001212  Connections made
0x00001213  Connections failed
0x00001216  Bytes received
0x00001217  Server Message Blocks (SMBs) received
0x00001218  Bytes transmitted
0x00001219  Server Message Blocks (SMBs) transmitted
0x0000121A  Read operations
0x0000121B  Write operations
0x0000121C  Raw reads denied
0x0000121D  Raw writes denied
0x0000121E  Network errors
0x0000121F  Connections made
0x00001220  Reconnections made
0x00001221  Server disconnects
0x00001222  Sessions started
0x00001223  Hung sessions
0x00001224  Failed sessions
0x00001225  Failed operations
0x00001226  Use count
0x00001227  Failed use count
0x0000122A  *** was deleted successfully.
0x0000122B  *** was used successfully.
0x0000122C  The message was successfully sent to ***.
0x0000122D  The message name *** was forwarded successfully.
0x0000122E  The message name *** was added successfully.
0x0000122F  The message name forwarding was successfully canceled.
0x00001230  *** was shared successfully.
0x00001231  The server *** successfully logged you on as ***.
0x00001232  *** was logged off successfully.
0x00001233  on startup.
0x00001235  The password was changed successfully.
0x00001236  *** file(s) copied.
0x00001237  *** file(s) moved.
0x00001238  The message was successfully sent to all users of the network.
0x00001239  The message was successfully sent to domain ***.
0x0000123A  The message was successfully sent to all users of this server.
0x0000123B  The message was successfully sent to group ****.
0x00001257  Microsoft LAN Manager Version ***
0x00001258  Windows NT Server
0x00001259  Windows NT Workstation
0x0000125A  MS-DOS Enhanced Workstation
0x0000125B  Created at ***
0x0000125C  Server NameRemark
0x0000125D  Cannot enumerate servers in non-default compartment.
0x0000125E  (UNC)
0x0000125F  ...
0x00001260  Domain
0x00001261  Resources on ***
0x00001262  Invalid network provider.Available networks are:
0x00001266  Disk
0x00001267  Print
0x00001268  Comm
0x00001269  IPC
0x0000126A  Status Local RemoteNetwork
0x0000126B  OK
0x0000126C  Dormant
0x0000126D  Paused
0x0000126E  Disconnected
0x0000126F  Error
0x00001270  Connecting
0x00001271  Reconnecting
0x00001272  Status
0x00001273  Local name
0x00001274  Remote name
0x00001275  Resource type
0x00001276  # Opens
0x00001277  # Connections
0x00001278  Unavailable
0x0000127A  Share name ResourceRemark
0x0000127B  Share name
0x0000127C  Resource
0x0000127D  Spooled
0x0000127E  Permission
0x0000127F  Maximum users
0x00001280  No limit
0x00001281  Users
0x00001282  Are you sure you want to use this share name? ***:
0x00001283  Caching
0x00001284  ID PathUser name# Locks
0x00001285  File ID
0x00001286  Locks
0x00001287  Permissions
0x00001288  Share name
0x00001289  Type
0x0000128A  Used as
0x0000128B  Comment
0x0000128E  Computer User nameClient Type Opens Idle time
0x0000128F  Computer
0x00001290  Sess time
0x00001291  Idle time
0x00001292  Share name Type # Opens
0x00001293  Client type
0x00001294  Guest logon
0x000012A2  Manual caching of documents
0x000012A3  Automatic caching of documents
0x000012A4  Automatic caching of programs and documents
0x000012A5  Manual caching of documents with BranchCache enabled
0x000012A6  Caching disabled
0x000012A7  Automatic
0x000012A8  Manual
0x000012A9  Documents
0x000012AA  Programs
0x000012AB  BranchCache
0x000012AC  None
0x000012C0  Name
0x000012C1  Forwarded to
0x000012C2  Forwarded to you from
0x000012C3  Users of this server
0x000012C4  Net Send has been interrupted by a Ctrl+Break from the user.
0x000012CA  Name Job #SizeStatus
0x000012CB  jobs
0x000012CC  Print
0x000012CD  Name
0x000012CE  Job #
0x000012CF  Size
0x000012D0  Status
0x000012D1  Separator file
0x000012D2  Comment
0x000012D3  Priority
0x000012D4  Print after
0x000012D5  Print until
0x000012D6  Print processor
0x000012D7  Additional info
0x000012D8  Parameters
0x000012D9  Print Devices
0x000012DA  Printer Active
0x000012DB  Printer held
0x000012DC  Printer error
0x000012DD  Printer being deleted
0x000012DE  Printer status unknown
0x000012E8  Held until ***
0x000012E9  Job #
0x000012EA  Submitting user
0x000012EB  Notify
0x000012EC  Job data type
0x000012ED  Job parameters
0x000012EE  Waiting
0x000012EF  Held in queue
0x000012F0  Spooling
0x000012F1  Paused
0x000012F2  Offline
0x000012F3  Error
0x000012F4  Out of paper
0x000012F5  Intervention required
0x000012F6  Printing
0x000012F7  on
0x000012F8  Paused on ***
0x000012F9  Offline on ***
0x000012FA  Error on***
0x000012FB  Out of Paper on ***
0x000012FC  Check printer on ***
0x000012FD  Printing on ***
0x000012FE  Driver
0x00001342  User nameType Date
0x00001343  Lockout
0x00001344  Service
0x00001345  Server
0x00001346  Server started
0x00001347  Server paused
0x00001348  Server continued
0x00001349  Server stopped
0x0000134A  Session
0x0000134B  Logon Guest
0x0000134C  Logon User
0x0000134D  Logon Administrator
0x0000134E  Logoff normal
0x0000134F  Logon
0x00001350  Logoff error
0x00001351  Logoff auto-disconnect
0x00001352  Logoff administrator-disconnect
0x00001353  Logoff forced by logon restrictions
0x00001354  Service
0x00001355  *** Installed
0x00001356  *** Install Pending
0x00001357  *** Paused
0x00001358  *** Pause Pending
0x00001359  *** Continued
0x0000135A  *** Continue Pending
0x0000135B  *** Stopped
0x0000135C  *** Stop Pending
0x0000135D  Account
0x0000135E  User account *** was modified.
0x0000135F  Group account *** was modified.
0x00001360  User account *** was deleted
0x00001361  Group account *** was deleted
0x00001362  User account *** was added
0x00001363  Group account *** was added
0x00001364  Account system settings were modified
0x00001365  Logon restriction
0x00001366  Limit exceeded:UNKNOWN
0x00001367  Limit exceeded:Logon hours
0x00001368  Limit exceeded:Account expired
0x00001369  Limit exceeded:Workstation ID invalid
0x0000136A  Limit exceeded:Account disabled
0x0000136B  Limit exceeded:Account deleted
0x0000136C  Share
0x0000136D  Use ***
0x0000136E  Unuse ***
0x0000136F  User's session disconnected ***
0x00001370  Administrator stopped sharing resource ***
0x00001371  User reached limit for ***
0x00001372  Bad password
0x00001373  Administrator privilege required
0x00001374  Access
0x00001375  *** permissions added
0x00001376  *** permissions modified
0x00001377  *** permissions deleted
0x00001378  Access denied
0x00001379  Unknown
0x0000137A  Other
0x0000137B  Duration:
0x0000137C  Duration: Not available
0x0000137D  Duration: Less than one second
0x0000137E  (none)
0x0000137F  Closed ***
0x00001380  Closed *** (disconnected)
0x00001381  Administrator closed ***
0x00001382  Access ended
0x00001383  Log on to network
0x00001384  Logon denied
0x00001385  Program Message Time
0x00001386  Account locked due to *** bad passwords
0x00001387  Account unlocked by administrator
0x00001388  Log off network
0x00001389  The operation cannot be completed because other resources are dependent on this resource.
0x0000138A  The cluster resource dependency cannot be found.
0x0000138B  The cluster resource cannot be made dependent on the specified resource because it is already dependent.
0x0000138C  The cluster resource is not online.
0x0000138D  A cluster node is not available for this operation.
0x0000138E  The cluster resource is not available.
0x0000138F  The cluster resource could not be found.
0x00001390  The cluster is being shut down.
0x00001391  A cluster node cannot be evicted from the cluster unless the node is down or it is the last node.
0x00001392  The object already exists.
0x00001393  The object is already in the list.
0x00001394  The cluster group is not available for any new requests.
0x00001395  The cluster group could not be found.
0x00001396  The operation could not be completed because the cluster group is not online.
0x00001397  The operation failed because either the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource.
0x00001398  The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group.
0x00001399  The cluster resource could not be created in the specified resource monitor.
0x0000139A  The cluster resource could not be brought online by the resource monitor.
0x0000139B  The operation could not be completed because the cluster resource is online.
0x0000139C  The cluster resource could not be deleted or brought offline because it is the quorum resource.
0x0000139D  The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource.
0x0000139E  The cluster software is shutting down.
0x0000139F  The group or resource is not in the correct state to perform the requested operation.
0x000013A0  The properties were stored but not all changes will take effect until the next time the resource is brought online.
0x000013A1  The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.
0x000013A2  The cluster resource could not be deleted since it is a core resource.
0x000013A3  The quorum resource failed to come online.
0x000013A4  The quorum log could not be created or mounted successfully.
0x000013A5  The cluster log is corrupt.
0x000013A6  The record could not be written to the cluster log since it exceeds the maximum size.
0x000013A7  The cluster log exceeds its maximum size.
0x000013A8  No checkpoint record was found in the cluster log.
0x000013A9  The minimum required disk space needed for logging is not available.
0x000013AA  The cluster node failed to take control of the quorum resource because the resource is owned by another active node.
0x000013AB  A cluster network is not available for this operation.
0x000013AC  A cluster node is not available for this operation.
0x000013AD  All cluster nodes must be running to perform this operation.
0x000013AE  A cluster resource failed.
0x000013AF  The cluster node is not valid.
0x000013B0  The cluster node already exists.
0x000013B1  A node is in the process of joining the cluster.
0x000013B2  The cluster node was not found.
0x000013B3  The cluster local node information was not found.
0x000013B4  The cluster network already exists.
0x000013B5  The cluster network was not found.
0x000013B6  The cluster network interface already exists.
0x000013B7  The cluster network interface was not found.
0x000013B8  The cluster request is not valid for this object.
0x000013B9  The cluster network provider is not valid.
0x000013BA  The cluster node is down.
0x000013BB  The cluster node is not reachable.
0x000013BC  The cluster node is not a member of the cluster.
0x000013BD  A cluster join operation is not in progress.
0x000013BE  The cluster network is not valid.
0x000013BF  Mar
0x000013C0  The cluster node is up.
0x000013C1  The cluster IP address is already in use.
0x000013C2  The cluster node is not paused.
0x000013C3  No cluster security context is available.
0x000013C4  The cluster network is not configured for internal cluster communication.
0x000013C5  The cluster node is already up.
0x000013C6  The cluster node is already down.
0x000013C7  The cluster network is already online.
0x000013C8  The cluster network is already offline.
0x000013C9  The cluster node is already a member of the cluster.
0x000013CA  The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network.
0x000013CB  One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network.
0x000013CC  This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list.
0x000013CD  The cluster quorum resource is not allowed to have any dependencies.
0x000013CE  The cluster node is paused.
0x000013CF  The cluster resource cannot be brought online. The owner node cannot run this resource.
0x000013D0  The cluster node is not ready to perform the requested operation.
0x000013D1  The cluster node is shutting down.
0x000013D2  The cluster join operation was aborted.
0x000013D3  The cluster join operation failed due to incompatible software versions between the joining node and its sponsor.
0x000013D4  This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor.
0x000013D5  The system configuration changed during the cluster join or form operation. The join or form operation was aborted.
0x000013D6  The specified resource type was not found.
0x000013D7  The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node.
0x000013D8  The specified resource name is not supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL.
0x000013D9  No authentication package could be registered with the RPC server.
0x000013DA  You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group.
0x000013DB  The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join.
0x000013DC  The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state.
0x000013DD  A non locker code got a request to reserve the lock for making global updates.
0x000013DE  The quorum disk could not be located by the cluster service.
0x000013DF  The backed up cluster database is possibly corrupt.
0x000013E0  A DFS root already exists in this cluster node.
0x000013E1  An attempt to modify a resource property failed because it conflicts with another existing property.
0x000013E2  Spain
0x000013E3  Denmark
0x000013E4  Sweden
0x000013E5  Norway
0x000013E6  Germany
0x000013E7  Australia
0x000013E8  Japan
0x000013E9  Korea
0x000013EA  China (PRC)
0x000013EB  Taiwan
0x000013EC  Asia
0x000013ED  Portugal
0x000013EE  Finland
0x000013EF  Arabic
0x000013F0  Hebrew
0x0000141E  A power failure has occurred at ***.Please terminate all activity with this server.
0x0000141F  Power has been restored at ***.Normal operations have resumed.
0x00001420  The UPS service is starting shut down at ***.
0x00001421  The UPS service is about to perform final shut down.
0x00001432  The Workstation must be started with the NET START command.
0x00001437  Remote IPC
0x00001438  Remote Admin
0x00001439  Default share
0x0000143A  User Profiles
0x000014A0  this account. Do you want to continue this operation? ***:
0x000014A1  want to overwrite the remembered connection? ***:
0x000014A2  caused the error will be ignored. ***:
0x000014A4  Do you want to continue this operation? ***:
0x000014A5  Do you want to add this? ***:
0x000014A6  Do you want to continue this operation? ***:
0x000014A7  Is it OK to start it? ***:
0x000014A8  Do you want to start the Workstation service? ***:
0x000014A9  Is it OK to continue disconnecting and force them closed? ***:
0x000014AA  The printer does not exist.Do you want to create it? ***:
0x000014AB  Never
0x000014AC  Never
0x000014AD  Never
0x000014AF  NET.HLP
0x000014B0  NET.HLP
0x000014B1  Deny
0x000014B4  The NCB is the data.
0x000014B5  The NCB is the data.
0x000014B6  invalid.The NCB is the data.
0x000014B7  The NCB is the data.
0x000014B8  invalid.The NCB is the data.
0x000014B9  terminated abnormally.The NCB is the data.
0x000014BA  The NCB is the data.
0x000014BB  The NCB is the data.
0x000014BC  The NCB is the data.
0x000014BD  The network control block (NCB) request was refused.The NCB is the data.
0x000014BE  The NCB is the data.
0x000014BF  The NCB is the data.
0x000014C0  illogical.The NCB is the data.
0x000014C1  The network control block (NCB) request was refused.The NCB is the data.
0x000014C2  The network control block (NCB) request was refused.The NCB is the data.
0x000014C3  The network control block (NCB) command completed.The NCB is the data.
0x000014C4  The NCB is the data.
0x000014C5  The NCB is the data.
0x000014C6  on the remote computer.The NCB is the data.
0x000014C7  The NCB is the data.
0x000014C8  did not answer.The NCB is the data.
0x000014C9  00h in the NCB name.The NCB is the data.
0x000014CA  The NCB is the data.
0x000014CB  The NCB is the data.
0x000014CC  The NCB is the data.
0x000014CD  names on the network. The network control block (NCB) is the data.
0x000014CE  incompatible remote device.The network control block (NCB) is the data.
0x000014D5  The network control block (NCB) request was refused.The NCB is the data.
0x000014D6  The NCB request was refused.The NCB is the data.
0x000014D7  The NCB is the data.
0x000014D8  The NCB is the data.
0x000014D9  The NCB is the data.
0x000014DA  The NCB is the data.
0x000014E7  The NCB request was refused.The NCB is the data.
0x000014E8  the data.
0x000014EA  The network control block (NCB) request was refused.The NCB is the data.
0x000014EC  The network control block (NCB) request was refused.The NCB is the data.
0x000014F4  The network control block (NCB) request was refused.The NCB is the data.
0x000014F5  The network control block (NCB) request was refused.The NCB is the data.
0x000014F6  The network control block (NCB) request was refused.The NCB is the data.
0x000014F7  The network control block (NCB) request was refused.The NCB is the data.
0x000014F8  The network control block (NCB) request was refused.The NCB is the data.
0x000014F9  The network control block (NCB) request was refused.The NCB is the data.
0x000014FA  The NCB is the data.
0x00001504  The network control block (NCB) request was refused.The NCB is the data.
0x00001505  The NCB is the data.
0x0000157C  domain controller *** is not retrieving the updates.
0x0000157D  retrieves the updates.
0x0000157E  exceeds the maximum allowed skew of *** seconds.
0x0000157F  due to *** bad password attempts.
0x00001580  The *** log file cannot be opened.
0x00001581  The *** log file is corrupted and will be cleared.
0x00001582  default log file.
0x00001583  If this dialog reappears, contact your helpdesk or system administrator.
0x00001584  The security database full synchronization has been initiated by the server ***.
0x00001585  A previous working configuration was used instead.
0x00001586  The exception 0x*** occurred in the application *** at location 0x***.
0x00001587  (SID).
0x00001588  demoted or removed from the domain.
0x00001589  relationship.
0x0000158A  A full dump was not saved.
0x0000158B  A dump was saved in: ***.
0x0000158C  (SID).NT should be re-installed on either *** or ***.
0x0000158D  The name of the trusted domain should be changed to a valid name.
0x000015E0  Could not share the User or Script path.
0x000015E1  database.
0x000015E2  local or network security database.
0x00001644  ***
0x00001645  ***
0x00001646  ***
0x00001647  ***
0x00001648  ***
0x00001649  the change log.
0x0000164A  ***
0x0000164B  The down-level logon request for the user *** from *** failed.
0x0000164C  The down-level logoff request for the user *** from *** failed.
0x0000164D  failed.
0x0000164E  failed.
0x0000164F  caller.
0x00001650  ***
0x00001651  the caller.
0x00001652  ***
0x00001653  applied to the database.
0x00001654  ***
0x00001655  primary domain controller *** completed successfully.
0x00001656  ***
0x00001657  in the specified domain.
0x00001658  failed because the computer *** does not have a local security database account.
0x00001659  Otherwise, the account is an interdomain trust account with the specified domain.
0x0000165A  ***
0x0000165B  If '***' is not a Domain Controller, it should be disjoined from the domain.
0x0000165C  Could not register control handler with service controller ***.
0x0000165D  Could not set service status with service controller ***.
0x0000165E  Could not find the computer name ***.
0x0000165F  Could not load *** device driver.
0x00001660  Could not load any transport.
0x00001661  ***
0x00001662  ***
0x00001663  ***
0x00001664  ***
0x00001665  ***
0x00001666  ***
0x00001667  ***
0x00001668  ***
0x00001669  ***
0x0000166A  SERVERS global group.It cannot be both.
0x0000166B  BDCs from the domain.
0x0000166C  ***
0x0000166D  ***
0x0000166E  Service failed to retrieve messages needed to boot remote boot clients.
0x0000166F  for 3Com 3Start remote boot clients.
0x00001670  Service experienced a severe system error and will shut itself down.
0x00001671  boot data.Remote boot of this client was not completed.
0x00001672  file ***.
0x00001673  file ***.
0x00001674  at the remote boot server.
0x00001675  because checksum for file *** could not be calculated.
0x00001676  file ***.
0x00001677  line and/or loader line.
0x00001678  file ***.
0x00001679  service internal error.
0x0000167A  invalid boot header.
0x0000167B  Client with computer name *** was not booted due to network error.
0x0000167C  Client with adapter id *** was not booted due to lack of resources.
0x0000167D  Service experienced error copying file or directory ***.
0x0000167E  Service experienced error deleting file or directory ***.
0x0000167F  Service experienced error setting permissions on file or directory ***.
0x00001680  Service experienced error evaluating RPL configurations.
0x00001681  Service experienced error creating RPL profiles for all configurations.
0x00001682  Service experienced error accessing registry.
0x00001683  Service experienced error replacing possibly outdated RPLDISK.SYS.
0x00001684  and the user accounts for the individual RPL workstations.
0x00001685  Service failed to back up its database.
0x00001686  from the backup.
0x00001687  will not start.
0x00001688  Service successfully restored its database from the backup.
0x00001689  will not start.
0x0000168A  Use the Active Directory Users and Computers tool or Server Manager to remove the BDC account for ***.
0x0000168B  will write to the Application event log when it is finished.
0x0000168C  Lan Manager BDCs are not permitted in NT domains.
0x0000168D  records from the file 'SystemRoot\System32\Config\Netlogon.dns' to the DNS database.
0x0000168E  Error Value: ***
0x0000168F  Error Value: ***
0x00001690  ***
0x00001691  ***
0x00001692  the IP address.Consider adding a subnet object for this IP address.
0x00001693  Rename the site to be a valid name.
0x00001694  Correct the name of the subnet object.
0x00001695  controller or by restarting Net Logon service on the domain controller.
0x00001696  ***
0x00001697  is not responsive.The current RPC call from Netlogon on \\*** to *** has been cancelled.
0x00001698  Directory Server replication costs.
0x00001699  This Domain Controller no longer automatically covers site '***' for domain '***'.
0x0000169A  Directory Server replication costs.
0x0000169B  This Global Catalog server no longer automatically covers site '***' for forest '***'.
0x0000169C  ***
0x0000169D  ***
0x0000169E  ***
0x0000169F  ***
0x000016A0  Directory Server replication costs.
0x000016A1  This LDAP server no longer automatically covers site '***' for non-domain NC '***'.
0x000016A2  Directory Server replication costs.
0x000016A3  domain '***' since this site has been manually configured in the registry.
0x000016A4  Directory Server replication costs.
0x000016A5  forest '***' since this site has been manually configured in the registry.
0x000016A6  configured Directory Server replication costs.
0x000016A7  non-domain NC '***' since this site has been manually configured in the registry.
0x000016A8  collision.
0x000016A9  DsCrackNames status = 0x***, crack error = 0x***.
0x000016AA  to the selected site object.
0x000016AB  ***
0x000016AC  The value of 0x*** has been assigned to this parameter.
0x000016AD  ***
0x000016AE  records from the file 'SystemRoot\System32\Config\Netlogon.dns' to the DNS database.
0x000016AF  maximum size in bytes.
0x000016B0  'SystemRoot\System32\Config\Netlogon.dns' from the DNS database.
0x000016B1  service on this machine and verify that this event log no longer appears.
0x000016B2  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize
0x000016B3  Error Value: ***
0x000016B4  Error Value: ***
0x000016B5  registered in DNS. If the problem persists, please contact your domain administrator.
0x000016B6  server that hosts it.
0x000016B7  persists, please contact your domain administrator.
0x00001702  An operation was attempted that is incompatible with the current membership state of the node.
0x00001703  The quorum resource does not contain the quorum log.
0x00001704  The membership engine requested shutdown of the cluster service on this node.
0x00001705  The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node.
0x00001706  A matching cluster network for the specified IP address could not be found.
0x00001707  The actual data type of the property did not match the expected data type of the property.
0x00001708  The cluster node was evicted from the cluster successfully, but the node was not cleaned up. To determine what cleanup steps failed and how to recover, see the Failover Clustering application event log using Event Viewer.
0x00001709  Two or more parameter values specified for a resource's properties are in conflict.
0x0000170A  This computer cannot be made a member of a cluster.
0x0000170B  This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed.
0x0000170C  A cluster cannot be created with the specified cluster name because that cluster name is already in use. Specify a different name for the cluster.
0x0000170D  The cluster configuration action has already been committed.
0x0000170E  The cluster configuration action could not be rolled back.
0x0000170F  The drive letter assigned to a system disk on one node conflicted with the drive letter assigned to a disk on another node.
0x00001710  One or more nodes in the cluster are running a version of Windows that does not support this operation.
0x00001711  The name of the corresponding computer account doesn't match the Network Name for this resource.
0x00001712  No network adapters are available.
0x00001713  The cluster node has been poisoned.
0x00001714  The group is unable to accept the request since it is moving to another node.
0x00001715  The resource type cannot accept the request since is too busy performing another operation.
0x00001716  The call to the cluster resource DLL timed out.
0x00001717  The address is not valid for an IPv6 Address resource. A global IPv6 address is required, and it must match a cluster network. Compatibility addresses are not permitted.
0x00001718  An internal cluster error occurred. A call to an invalid function was attempted.
0x00001719  A parameter value is out of acceptable range.
0x0000171A  A network error occurred while sending data to another node in the cluster. The number of bytes transmitted was less than required.
0x0000171B  An invalid cluster registry operation was attempted.
0x0000171C  An input string of characters is not properly terminated.
0x0000171D  An input string of characters is not in a valid format for the data it represents.
0x0000171E  An internal cluster error occurred. A cluster database transaction was attempted while a transaction was already in progress.
0x0000171F  An internal cluster error occurred. There was an attempt to commit a cluster database transaction while no transaction was in progress.
0x00001720  An internal cluster error occurred. Data was not properly initialized.
0x00001721  An error occurred while reading from a stream of data. An unexpected number of bytes was returned.
0x00001722  An error occurred while writing to a stream of data. The required number of bytes could not be written.
0x00001723  An error occurred while deserializing a stream of cluster data.
0x00001724  One or more property values for this resource are in conflict with one or more property values associated with its dependent resource(s).
0x00001725  A quorum of cluster nodes was not present to form a cluster.
0x00001726  The cluster network is not valid for an IPv6 Address resource, or it does not match the configured address.
0x00001727  The cluster network is not valid for an IPv6 Tunnel resource. Check the configuration of the IP Address resource on which the IPv6 Tunnel resource depends.
0x00001728  Quorum resource cannot reside in the Available Storage group.
0x00001729  The dependencies for this resource are nested too deeply.
0x0000172A  The call into the resource DLL raised an unhandled exception.
0x0000172B  The RHS process failed to initialize.
0x0000172C  The Failover Clustering feature is not installed on this node.
0x0000172D  The resources must be online on the same node for this operation
0x0000172E  A new node can not be added since this cluster is already at its maximum number of nodes.
0x0000172F  This cluster can not be created since the specified number of nodes exceeds the maximum allowed limit.
0x00001730  An attempt to use the specified cluster name failed because an enabled computer object with the given name already exists in the domain.
0x00001731  This cluster cannot be destroyed. It has non-core application groups which must be deleted before the cluster can be destroyed.
0x00001732  File share associated with file share witness resource cannot be hosted by this cluster or any of its nodes.
0x00001733  If it is the last node in the cluster, destroy cluster command should be used.
0x00001734  Only one instance of this resource type is allowed in the cluster.
0x00001735  Only one instance of this resource type is allowed per resource group.
0x00001736  The resource failed to come online due to the failure of one or more provider resources.
0x00001737  The resource has indicated that it cannot come online on any node.
0x00001738  The current operation cannot be performed on this group at this time.
0x00001739  The directory or file is not located on a cluster shared volume.
0x0000173A  The Security Descriptor does not meet the requirements for a cluster.
0x0000173B  Those resources must be moved to available storage in order for operation to succeed.
0x0000173C  Use shared volume APIs to perform desired operation.
0x0000173D  Back up is in progress. Please wait for backup completion before trying this operation again.
0x0000173E  The path does not belong to a cluster shared volume.
0x0000173F  The cluster shared volume is not locally mounted on this node.
0x00001740  The cluster watchdog is terminating.
0x00001770  The specified file could not be encrypted.
0x00001771  The specified file could not be decrypted.
0x00001772  The specified file is encrypted and the user does not have the ability to decrypt it.
0x00001773  There is no valid encryption recovery policy configured for this system.
0x00001774  The required encryption driver is not loaded for this system.
0x00001775  The file was encrypted with a different encryption driver than is currently loaded.
0x00001776  There are no EFS keys defined for the user.
0x00001777  The specified file is not encrypted.
0x00001778  The specified file is not in the defined EFS export format.
0x00001779  The specified file is read only.
0x0000177A  The directory has been disabled for encryption.
0x0000177B  The server is not trusted for remote encryption operation.
0x0000177C  Recovery policy configured for this system contains invalid recovery certificate.
0x0000177D  The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file.
0x0000177E  The disk partition does not support file encryption.
0x0000177F  This machine is disabled for file encryption.
0x00001780  A newer system is required to decrypt this encrypted file.
0x00001781  The remote server sent an invalid response for a file being opened with Client Side Encryption.
0x00001782  Client Side Encryption is not supported by the remote server even though it claims to support it.
0x00001783  File is encrypted and should be opened in Client Side Encryption mode.
0x00001784  A new encrypted file is being created and a $EFS needs to be provided.
0x00001785  The SMB client requested a CSE FSCTL on a non-CSE file.
0x00001786  The requested operation was blocked by policy. For more information, contact your system administrator.
0x000017E6  The list of servers for this workgroup is not currently available
0x00001838  The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks may be configured to run in other accounts.
0x000019C8  Log service encountered an invalid log sector.
0x000019C9  Log service encountered a log sector with invalid block parity.
0x000019CA  Log service encountered a remapped log sector.
0x000019CB  Log service encountered a partial or incomplete log block.
0x000019CC  Log service encountered an attempt access data outside the active log range.
0x000019CD  Log service user marshalling buffers are exhausted.
0x000019CE  Log service encountered an attempt read from a marshalling area with an invalid read context.
0x000019CF  Log service encountered an invalid log restart area.
0x000019D0  Log service encountered an invalid log block version.
0x000019D1  Log service encountered an invalid log block.
0x000019D2  Log service encountered an attempt to read the log with an invalid read mode.
0x000019D3  Log service encountered a log stream with no restart area.
0x000019D4  Log service encountered a corrupted metadata file.
0x000019D5  Log service encountered a metadata file that could not be created by the log file system.
0x000019D6  Log service encountered a metadata file with inconsistent data.
0x000019D7  Log service encountered an attempt to erroneous allocate or dispose reservation space.
0x000019D8  Log service cannot delete log file or file system container.
0x000019D9  Log service has reached the maximum allowable containers allocated to a log file.
0x000019DA  Log service has attempted to read or write backward past the start of the log.
0x000019DB  Log policy could not be installed because a policy of the same type is already present.
0x000019DC  Log policy in question was not installed at the time of the request.
0x000019DD  The installed set of policies on the log is invalid.
0x000019DE  A policy on the log in question prevented the operation from completing.
0x000019DF  Log space cannot be reclaimed because the log is pinned by the archive tail.
0x000019E0  Log record is not a record in the log file.
0x000019E1  Number of reserved log records or the adjustment of the number of reserved log records is invalid.
0x000019E2  Reserved log space or the adjustment of the log space is invalid.
0x000019E3  An new or existing archive tail or base of the active log is invalid.
0x000019E4  Log space is exhausted.
0x000019E5  The log could not be set to the requested size.
0x000019E6  Log is multiplexed, no direct writes to the physical log is allowed.
0x000019E7  The operation failed because the log is a dedicated log.
0x000019E8  The operation requires an archive context.
0x000019E9  Log archival is in progress.
0x000019EA  The operation requires a non-ephemeral log, but the log is ephemeral.
0x000019EB  The log must have at least two containers before it can be read from or written to.
0x000019EC  A log client has already registered on the stream.
0x000019ED  A log client has not been registered on the stream.
0x000019EE  A request has already been made to handle the log full condition.
0x000019EF  Log service encountered an error when attempting to read from a log container.
0x000019F0  Log service encountered an error when attempting to write to a log container.
0x000019F1  Log service encountered an error when attempting open a log container.
0x000019F2  Log service encountered an invalid container state when attempting a requested action.
0x000019F3  Log service is not in the correct state to perform a requested action.
0x000019F4  Log space cannot be reclaimed because the log is pinned.
0x000019F5  Log metadata flush failed.
0x000019F6  Security on the log and its containers is inconsistent.
0x000019F7  Records were appended to the log or reservation changes were made, but the log could not be flushed.
0x000019F8  The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available.
0x00001A2C  The transaction handle associated with this operation is not valid.
0x00001A2D  The requested operation was made in the context of a transaction that is no longer active.
0x00001A2E  The requested operation is not valid on the Transaction object in its current state.
0x00001A2F  The caller has called a response API, but the response is not expected because the TM did not issue the corresponding request to the caller.
0x00001A30  It is too late to perform the requested operation, since the Transaction has already been aborted.
0x00001A31  It is too late to perform the requested operation, since the Transaction has already been committed.
0x00001A32  The Transaction Manager was unable to be successfully initialized. Transacted operations are not supported.
0x00001A33  The specified ResourceManager made no changes or updates to the resource under this transaction.
0x00001A34  The resource manager has attempted to prepare a transaction that it has not successfully joined.
0x00001A35  The Transaction object already has a superior enlistment, and the caller attempted an operation that would have created a new superior. Only a single superior enlistment is allow.
0x00001A36  The RM tried to register a protocol that already exists.
0x00001A37  The attempt to propagate the Transaction failed.
0x00001A38  The requested propagation protocol was not registered as a CRM.
0x00001A39  The buffer passed in to PushTransaction or PullTransaction is not in a valid format.
0x00001A3A  The current transaction context associated with the thread is not a valid handle to a transaction object.
0x00001A3B  The specified Transaction object could not be opened, because it was not found.
0x00001A3C  The specified ResourceManager object could not be opened, because it was not found.
0x00001A3D  The specified Enlistment object could not be opened, because it was not found.
0x00001A3E  The specified TransactionManager object could not be opened, because it was not found.
0x00001A3F  The object specified could not be created or opened, because its associated TransactionManager is not online.The TransactionManager must be brought fully Online by calling RecoverTransactionManager to recover to the end of its LogFile before objects in its Transaction or ResourceManager namespaces can be opened.In addition, errors in writing records to its LogFile can cause a TransactionManager to go offline.
0x00001A40  The specified TransactionManager was unable to create the objects contained in its logfile in the Ob namespace. Therefore, the TransactionManager was unable to recover.
0x00001A41  The call to create a superior Enlistment on this Transaction object could not be completed, because the Transaction object specified for the enlistment is a subordinate branch of the Transaction. Only the root of the Transaction can be enlisted on as a superior.
0x00001A42  Because the associated transaction manager or resource manager has been closed, the handle is no longer valid.
0x00001A43  The specified operation could not be performed on this Superior enlistment, because the enlistment was not created with the corresponding completion response in the NotificationMask.
0x00001A44  The specified operation could not be performed, because the record that would be logged was too long. This can occur because of two conditions: either there are too many Enlistments on this Transaction, or the combined RecoveryInformation being logged on behalf of those Enlistments is too long.
0x00001A45  Implicit transaction are not supported.
0x00001A46  The kernel transaction manager had to abort or forget the transaction because it blocked forward progress.
0x00001A47  The TransactionManager identity that was supplied did not match the one recorded in the TransactionManager's log file.
0x00001A48  This snapshot operation cannot continue because a transactional resource manager cannot be frozen in its current state.Please try again.
0x00001A49  The transaction cannot be enlisted on with the specified EnlistmentMask, because the transaction has already completed the PrePrepare phase.In order to ensure correctness, the ResourceManager must switch to a write-through mode and cease caching data within this transaction.Enlisting for only subsequent transaction phases may still succeed.
0x00001A4A  The transaction does not have a superior enlistment.
0x00001A4B  The attempt to commit the Transaction completed, but it is possible that some portion of the transaction tree did not commit successfully due to heuristics.Therefore it is possible that some data modified in the transaction may not have committed, resulting in transactional inconsistency.If possible, check the consistency of the associated data.
0x00001A90  The function attempted to use a name that is reserved for use by another transaction.
0x00001A91  Transaction support within the specified resource manager is not started or was shut down due to an error.
0x00001A92  The metadata of the RM has been corrupted. The RM will not function.
0x00001A93  The specified directory does not contain a resource manager.
0x00001A95  The remote server or share does not support transacted file operations.
0x00001A96  The requested log size is invalid.
0x00001A97  The object (file, stream, link) corresponding to the handle has been deleted by a Transaction Savepoint Rollback.
0x00001A98  The specified file miniversion was not found for this transacted file open.
0x00001A99  The specified file miniversion was found but has been invalidated. Most likely cause is a transaction savepoint rollback.
0x00001A9A  A miniversion may only be opened in the context of the transaction that created it.
0x00001A9B  It is not possible to open a miniversion with modify access.
0x00001A9C  It is not possible to create any more miniversions for this stream.
0x00001A9E  The remote server sent mismatching version number or Fid for a file opened with transactions.
0x00001A9F  The handle has been invalidated by a transaction. The most likely cause is the presence of memory mapping on a file or an open handle when the transaction ended or rolled back to savepoint.
0x00001AA0  There is no transaction metadata on the file.
0x00001AA1  The log data is corrupt.
0x00001AA2  The file can't be recovered because there is a handle still open on it.
0x00001AA3  The transaction outcome is unavailable because the resource manager responsible for it has disconnected.
0x00001AA4  The request was rejected because the enlistment in question is not a superior enlistment.
0x00001AA5  The transactional resource manager is already consistent. Recovery is not needed.
0x00001AA6  The transactional resource manager has already been started.
0x00001AA7  The file cannot be opened transactionally, because its identity depends on the outcome of an unresolved transaction.
0x00001AA8  The operation cannot be performed because another transaction is depending on the fact that this property will not change.
0x00001AA9  The operation would involve a single file with two transactional resource managers and is therefore not allowed.
0x00001AAA  The $Txf directory must be empty for this operation to succeed.
0x00001AAB  The operation would leave a transactional resource manager in an inconsistent state and is therefore not allowed.
0x00001AAC  The operation could not be completed because the transaction manager does not have a log.
0x00001AAD  A rollback could not be scheduled because a previously scheduled rollback has already executed or been queued for execution.
0x00001AAE  The transactional metadata attribute on the file or directory is corrupt and unreadable.
0x00001AAF  The encryption operation could not be completed because a transaction is active.
0x00001AB0  This object is not allowed to be opened in a transaction.
0x00001AB1  An attempt to create space in the transactional resource manager's log failed. The failure status has been recorded in the event log.
0x00001AB2  Memory mapping (creating a mapped section) a remote file under a transaction is not supported.
0x00001AB3  Transaction metadata is already present on this file and cannot be superseded.
0x00001AB4  A transaction scope could not be entered because the scope handler has not been initialized.
0x00001AB5  Promotion was required in order to allow the resource manager to enlist, but the transaction was set to disallow it.
0x00001AB6  This file is open for modification in an unresolved transaction and may be opened for execute only by a transacted reader.
0x00001AB7  The request to thaw frozen transactions was ignored because transactions had not previously been frozen.
0x00001AB8  Transactions cannot be frozen because a freeze is already in progress.
0x00001AB9  The target volume is not a snapshot volume. This operation is only valid on a volume mounted as a snapshot.
0x00001ABA  The savepoint operation failed because files are open on the transaction. This is not permitted.
0x00001ABB  Windows has discovered corruption in a file, and that file has since been repaired. Data loss may have occurred.
0x00001ABC  The sparse operation could not be completed because a transaction is active on the file.
0x00001ABD  The call to create a TransactionManager object failed because the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument.
0x00001ABE  I/O was attempted on a section object that has been floated as a result of a transaction ending. There is no valid data.
0x00001ABF  The transactional resource manager cannot currently accept transacted work due to a transient condition such as low resources.
0x00001AC0  The transactional resource manager had too many tranactions outstanding that could not be aborted. The transactional resource manger has been shut down.
0x00001AC1  The operation could not be completed due to bad clusters on disk.
0x00001AC2  The compression operation could not be completed because a transaction is active on the file.
0x00001AC3  The operation could not be completed because the volume is dirty. Please run chkdsk and try again.
0x00001AC4  The link tracking operation could not be completed because a transaction is active.
0x00001AC5  This operation cannot be performed in a transaction.
0x00001AC6  The handle is no longer properly associated with its transaction.It may have been opened in a transactional resource manager that was subsequently forced to restart.Please close the handle and open a new one.
0x00001AC7  The specified operation could not be performed because the resource manager is not enlisted in the transaction.
0x0000001B  The drive cannot find the sector requested.
0x00001B59  The specified session name is invalid.
0x00001B5A  The specified protocol driver is invalid.
0x00001B5B  The specified protocol driver was not found in the system path.
0x00001B5C  The specified terminal connection driver was not found in the system path.
0x00001B5D  A registry key for event logging could not be created for this session.
0x00001B5E  A service with the same name already exists on the system.
0x00001B5F  A close operation is pending on the session.
0x00001B60  There are no free output buffers available.
0x00001B61  The MODEM.INF file was not found.
0x00001B62  The modem name was not found in MODEM.INF.
0x00001B63  The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem.
0x00001B64  The modem did not respond to the command sent to it. Verify that the modem is properly cabled and powered on.
0x00001B65  Carrier detect has failed or carrier has been dropped due to disconnect.
0x00001B66  Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional.
0x00001B67  Busy signal detected at remote site on callback.
0x00001B68  Voice detected at remote site on callback.
0x00001B69  Transport driver error
0x00001B6E  The specified session cannot be found.
0x00001B6F  The specified session name is already in use.
0x00001B70  The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.
0x00001B71  An attempt has been made to connect to a session whose video mode is not supported by the current client.
0x00001B7B  The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.
0x00001B7D  Your interactive logon privilege has been disabled. Please contact your administrator.
0x00001B7E  The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access.
0x00001B80  The client failed to respond to the server connect message.
0x00001B81  Disconnecting the console session is not supported.
0x00001B82  Reconnecting a disconnected session to the console is not supported.
0x00001B84  The request to control another session remotely was denied.
0x00001B85  The requested session access is denied.
0x00001B89  The specified terminal connection driver is invalid.
0x00001B8A  This may be because the session is disconnected or does not currently have a user logged on.
0x00001B8B  The requested session is not configured to allow remote control.
0x00001B8C  Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user. Please call your system administrator to obtain a unique license number.
0x00001B8D  Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. Please contact your system administrator.
0x00001B8E  The number of connections to this computer is limited and all connections are in use right now. Try connecting later or contact your system administrator.
0x00001B8F  The client you are using is not licensed to use this system. Your logon request is denied.
0x00001B90  The system license has expired. Your logon request is denied.
0x00001B91  Remote control could not be terminated because the specified session is not currently being remotely controlled.
0x00001B92  The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported.
0x00001B93  Activation has already been reset the maximum number of times for this installation. Your activation timer will not be cleared.
0x00001B94  Remote logins are currently disabled.
0x00001B95  You do not have the proper encryption level to access this Session.
0x00001B96  The user s\\s is currently logged on to this computer. Only the current user or an administrator can log on to this computer.
0x00001B97  The user s\\s is already logged on to the console of this computer. You do not have permission to log in at this time. To resolve this issue, contact s\\s and have them log off.
0x00001B98  Unable to log you on because of an account restriction.
0x00001B9A  The Client Drive Mapping Service Has Connected on Terminal Connection.
0x00001B9B  The Client Drive Mapping Service Has Disconnected on Terminal Connection.
0x00001B9C  The Terminal Server security layer detected an error in the protocol stream and has disconnected the client.
0x00001B9D  The target session is incompatible with the current session.
0x00001B9E  Windows can't connect to your session because a problem occurred in the Windows video subsystem. Try connecting again later, or contact the server administrator for assistance.
0x00001F41  The file replication service API was called incorrectly.
0x00001F42  The file replication service cannot be started.
0x00001F43  The file replication service cannot be stopped.
0x00001F44  The file replication service API terminated the request. The event log may have more information.
0x00001F45  The file replication service terminated the request. The event log may have more information.
0x00001F46  The file replication service cannot be contacted. The event log may have more information.
0x00001F47  The file replication service cannot satisfy the request because the user has insufficient privileges. The event log may have more information.
0x00001F48  The file replication service cannot satisfy the request because authenticated RPC is not available. The event log may have more information.
0x00001F49  The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The event log may have more information.
0x00001F4A  The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The event log may have more information.
0x00001F4B  The file replication service cannot communicate with the file replication service on the domain controller. The event log may have more information.
0x00001F4C  The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log may have more information.
0x00001F4D  The file replication service cannot populate the system volume because of an internal error. The event log may have more information.
0x00001F4E  The file replication service cannot populate the system volume because of an internal timeout. The event log may have more information.
0x00001F4F  The file replication service cannot process the request. The system volume is busy with a previous request.
0x00001F50  The file replication service cannot stop replicating the system volume because of an internal error. The event log may have more information.
0x00001F51  The file replication service detected an invalid parameter.
0x00002008  An error occurred while installing the directory service. For more information, see the event log.
0x00002009  The directory service evaluated group memberships locally.
0x0000200A  The specified directory service attribute or value does not exist.
0x0000200B  The attribute syntax specified to the directory service is invalid.
0x0000200C  The attribute type specified to the directory service is not defined.
0x0000200D  The specified directory service attribute or value already exists.
0x0000200E  The directory service is busy.
0x0000200F  The directory service is unavailable.
0x00002010  The directory service was unable to allocate a relative identifier.
0x00002011  The directory service has exhausted the pool of relative identifiers.
0x00002012  The requested operation could not be performed because the directory service is not the master for that type of operation.
0x00002013  The directory service was unable to initialize the subsystem that allocates relative identifiers.
0x00002014  The requested operation did not satisfy one or more constraints associated with the class of the object.
0x00002015  The directory service can perform the requested operation only on a leaf object.
0x00002016  The directory service cannot perform the requested operation on the RDN attribute of an object.
0x00002017  The directory service detected an attempt to modify the object class of an object.
0x00002018  The requested cross-domain move operation could not be performed.
0x00002019  Unable to contact the global catalog server.
0x0000201A  The policy object is shared and can only be modified at the root.
0x0000201B  The policy object does not exist.
0x0000201C  The requested policy information is only in the directory service.
0x0000201D  A domain controller promotion is currently active.
0x0000201E  A domain controller promotion is not currently active
0x00002020  An operations error occurred.
0x00002021  A protocol error occurred.
0x00002022  The time limit for this request was exceeded.
0x00002023  The size limit for this request was exceeded.
0x00002024  The administrative limit for this request was exceeded.
0x00002025  The compare response was false.
0x00002026  The compare response was true.
0x00002027  The requested authentication method is not supported by the server.
0x00002028  A more secure authentication method is required for this server.
0x00002029  Inappropriate authentication.
0x0000202A  The authentication mechanism is unknown.
0x0000202B  A referral was returned from the server.
0x0000202C  The server does not support the requested critical extension.
0x0000202D  This request requires a secure connection.
0x0000202E  Inappropriate matching.
0x0000202F  A constraint violation occurred.
0x00002030  There is no such object on the server.
0x00002031  There is an alias problem.
0x00002032  An invalid dn syntax has been specified.
0x00002033  The object is a leaf object.
0x00002034  There is an alias dereferencing problem.
0x00002035  The server is unwilling to process the request.
0x00002036  A loop has been detected.
0x00002037  There is a naming violation.
0x00002038  The result set is too large.
0x00002039  The operation affects multiple DSAs
0x0000203A  The server is not operational.
0x0000203B  A local error has occurred.
0x0000203C  An encoding error has occurred.
0x0000203D  A decoding error has occurred.
0x0000203E  The search filter cannot be recognized.
0x0000203F  One or more parameters are illegal.
0x00002040  The specified method is not supported.
0x00002041  No results were returned.
0x00002042  The specified control is not supported by the server.
0x00002043  A referral loop was detected by the client.
0x00002044  The preset referral limit was exceeded.
0x00002045  The search requires a SORT control.
0x00002046  The search results exceed the offset range specified.
0x0000206D  The root object must be the head of a naming context. The root object cannot have an instantiated parent.
0x0000206E  The add replica operation cannot be performed. The naming context must be writeable in order to create the replica.
0x0000206F  A reference to an attribute that is not defined in the schema occurred.
0x00002070  The maximum size of an object has been exceeded.
0x00002071  An attempt was made to add an object to the directory with a name that is already in use.
0x00002072  An attempt was made to add an object of a class that does not have an RDN defined in the schema.
0x00002073  An attempt was made to add an object using an RDN that is not the RDN defined in the schema.
0x00002074  None of the requested attributes were found on the objects.
0x00002075  The user buffer is too small.
0x00002076  The attribute specified in the operation is not present on the object.
0x00002077  Illegal modify operation. Some aspect of the modification is not permitted.
0x00002078  The specified object is too large.
0x00002079  The specified instance type is not valid.
0x0000207A  The operation must be performed at a master DSA.
0x0000207B  The object class attribute must be specified.
0x0000207C  A required attribute is missing.
0x0000207D  An attempt was made to modify an object to include an attribute that is not legal for its class.
0x0000207E  The specified attribute is already present on the object.
0x00002080  The specified attribute is not present, or has no values.
0x00002081  Multiple values were specified for an attribute that can have only one value.
0x00002082  A value for the attribute was not in the acceptable range of values.
0x00002083  The specified value already exists.
0x00002084  The attribute cannot be removed because it is not present on the object.
0x00002085  The attribute value cannot be removed because it is not present on the object.
0x00002086  The specified root object cannot be a subref.
0x00002087  Chaining is not permitted.
0x00002088  Chained evaluation is not permitted.
0x00002089  The operation could not be performed because the object's parent is either uninstantiated or deleted.
0x0000208A  Having a parent that is an alias is not permitted. Aliases are leaf objects.
0x0000208B  The object and parent must be of the same type, either both masters or both replicas.
0x0000208C  The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object.
0x0000208D  Directory object not found.
0x0000208E  The aliased object is missing.
0x0000208F  The object name has bad syntax.
0x00002090  It is not permitted for an alias to refer to another alias.
0x00002091  The alias cannot be dereferenced.
0x00002092  The operation is out of scope.
0x00002093  The operation cannot continue because the object is in the process of being removed.
0x00002094  The DSA object cannot be deleted.
0x00002095  A directory service error has occurred.
0x00002096  The operation can only be performed on an internal master DSA object.
0x00002097  The object must be of class DSA.
0x00002098  Insufficient access rights to perform the operation.
0x00002099  The object cannot be added because the parent is not on the list of possible superiors.
0x0000209A  Access to the attribute is not permitted because the attribute is owned by the Security Accounts Manager (SAM).
0x0000209B  The name has too many parts.
0x0000209C  The name is too long.
0x0000209D  The name value is too long.
0x0000209E  The directory service encountered an error parsing a name.
0x0000209F  The directory service cannot get the attribute type for a name.
0x000020A0  The name does not identify an object; the name identifies a phantom.
0x000020A1  The security descriptor is too short.
0x000020A2  The security descriptor is invalid.
0x000020A3  Failed to create name for deleted object.
0x000020A4  The parent of a new subref must exist.
0x000020A5  The object must be a naming context.
0x000020A6  It is not permitted to add an attribute which is owned by the system.
0x000020A7  The class of the object must be structural; you cannot instantiate an abstract class.
0x000020A8  The schema object could not be found.
0x000020A9  A local object with this GUID (dead or alive) already exists.
0x000020AA  The operation cannot be performed on a back link.
0x000020AB  The cross reference for the specified naming context could not be found.
0x000020AC  The operation could not be performed because the directory service is shutting down.
0x000020AD  The directory service request is invalid.
0x000020AE  The role owner attribute could not be read.
0x000020AF  The requested FSMO operation failed. The current FSMO holder could not be contacted.
0x000020B0  Modification of a DN across a naming context is not permitted.
0x000020B1  The attribute cannot be modified because it is owned by the system.
0x000020B2  Only the replicator can perform this function.
0x000020B3  The specified class is not defined.
0x000020B4  The specified class is not a subclass.
0x000020B5  The name reference is invalid.
0x000020B6  A cross reference already exists.
0x000020B7  It is not permitted to delete a master cross reference.
0x000020B8  Subtree notifications are only supported on NC heads.
0x000020B9  Notification filter is too complex.
0x000020BA  Schema update failed: duplicate RDN.
0x000020BB  Schema update failed: duplicate OID.
0x000020BC  Schema update failed: duplicate MAPI identifier.
0x000020BD  Schema update failed: duplicate schema-id GUID.
0x000020BE  Schema update failed: duplicate LDAP display name.
0x000020BF  Schema update failed: range-lower less than range upper.
0x000020C0  Schema update failed: syntax mismatch.
0x000020C1  Schema deletion failed: attribute is used in must-contain.
0x000020C2  Schema deletion failed: attribute is used in may-contain.
0x000020C3  Schema update failed: attribute in may-contain does not exist.
0x000020C4  Schema update failed: attribute in must-contain does not exist.
0x000020C5  Schema update failed: class in aux-class list does not exist or is not an auxiliary class.
0x000020C6  Schema update failed: class in poss-superiors does not exist.
0x000020C7  Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules.
0x000020C8  Schema update failed: Rdn-Att-Id has wrong syntax.
0x000020C9  Schema deletion failed: class is used as auxiliary class.
0x000020CA  Schema deletion failed: class is used as sub class.
0x000020CB  Schema deletion failed: class is used as poss superior.
0x000020CC  Schema update failed in recalculating validation cache.
0x000020CD  The tree deletion is not finished. The request must be made again to continue deleting the tree.
0x000020CE  The requested delete operation could not be performed.
0x000020CF  Cannot read the governs class identifier for the schema record.
0x000020D0  The attribute schema has bad syntax.
0x000020D1  The attribute could not be cached.
0x000020D2  The class could not be cached.
0x000020D3  The attribute could not be removed from the cache.
0x000020D4  The class could not be removed from the cache.
0x000020D5  The distinguished name attribute could not be read.
0x000020D6  No superior reference has been configured for the directory service. The directory service is therefore unable to issue referrals to objects outside this forest.
0x000020D7  The instance type attribute could not be retrieved.
0x000020D8  An internal error has occurred.
0x000020D9  A database error has occurred.
0x000020DA  The attribute GOVERNSID is missing.
0x000020DB  An expected attribute is missing.
0x000020DC  The specified naming context is missing a cross reference.
0x000020DD  A security checking error has occurred.
0x000020DE  The schema is not loaded.
0x000020DF  Schema allocation failed. Please check if the machine is running low on memory.
0x000020E0  Failed to obtain the required syntax for the attribute schema.
0x000020E1  The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available.
0x000020E2  The replication operation failed because of a schema mismatch between the servers involved.
0x000020E3  The DSA object could not be found.
0x000020E4  The naming context could not be found.
0x000020E5  The naming context could not be found in the cache.
0x000020E6  The child object could not be retrieved.
0x000020E7  The modification was not permitted for security reasons.
0x000020E8  The operation cannot replace the hidden record.
0x000020E9  The hierarchy file is invalid.
0x000020EA  The attempt to build the hierarchy table failed.
0x000020EB  The directory configuration parameter is missing from the registry.
0x000020EC  The attempt to count the address book indices failed.
0x000020ED  The allocation of the hierarchy table failed.
0x000020EE  The directory service encountered an internal failure.
0x000020EF  The directory service encountered an unknown failure.
0x000020F0  A root object requires a class of 'top'.
0x000020F1  This directory server is shutting down, and cannot take ownership of new floating single-master operation roles.
0x000020F2  The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.
0x000020F3  The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.
0x000020F4  The replication operation failed.
0x000020F5  An invalid parameter was specified for this replication operation.
0x000020F6  The directory service is too busy to complete the replication operation at this time.
0x000020F7  The distinguished name specified for this replication operation is invalid.
0x000020F8  The naming context specified for this replication operation is invalid.
0x000020F9  The distinguished name specified for this replication operation already exists.
0x000020FA  The replication system encountered an internal error.
0x000020FB  The replication operation encountered a database inconsistency.
0x000020FC  The server specified for this replication operation could not be contacted.
0x000020FD  The replication operation encountered an object with an invalid instance type.
0x000020FE  The replication operation failed to allocate memory.
0x000020FF  The replication operation encountered an error with the mail system.
0x00002100  The replication reference information for the target server already exists.
0x00002101  The replication reference information for the target server does not exist.
0x00002102  The naming context cannot be removed because it is replicated to another server.
0x00002103  The replication operation encountered a database error.
0x00002104  The naming context is in the process of being removed or is not replicated from the specified server.
0x00002105  Replication access was denied.
0x00002106  The requested operation is not supported by this version of the directory service.
0x00002107  The replication remote procedure call was cancelled.
0x00002108  The source server is currently rejecting replication requests.
0x00002109  The destination server is currently rejecting replication requests.
0x0000210A  The replication operation failed due to a collision of object names.
0x0000210B  The replication source has been reinstalled.
0x0000210C  The replication operation failed because a required parent object is missing.
0x0000210D  The replication operation was preempted.
0x0000210E  The replication synchronization attempt was abandoned because of a lack of updates.
0x0000210F  The replication operation was terminated because the system is shutting down.
0x00002110  Synchronization attempt failed because the destination DC is currently waiting to synchronize new partial attributes from source. This condition is normal if a recent schema change modified the partial attribute set. The destination partial attribute set is not a subset of source partial attribute set.
0x00002111  The replication synchronization attempt failed because a master replica attempted to sync from a partial replica.
0x00002112  The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.
0x00002113  The version of the directory service schema of the source forest is not compatible with the version of directory service on this computer.
0x00002114  Schema update failed: An attribute with the same link identifier already exists.
0x00002115  Name translation: Generic processing error.
0x00002116  Name translation: Could not find the name or insufficient right to see name.
0x00002117  Name translation: Input name mapped to more than one output name.
0x00002118  Name translation: Input name found, but not the associated output format.
0x00002119  Name translation: Unable to resolve completely, only the domain was found.
0x0000211A  Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire.
0x0000211B  Modification of a constructed attribute is not allowed.
0x0000211C  The OM-Object-Class specified is incorrect for an attribute with the specified syntax.
0x0000211D  The replication request has been posted; waiting for reply.
0x0000211E  The requested operation requires a directory service, and none was available.
0x0000211F  The LDAP display name of the class or attribute contains non-ASCII characters.
0x00002120  The requested search operation is only supported for base searches.
0x00002121  The search failed to retrieve attributes from the database.
0x00002122  The schema update operation tried to add a backward link attribute that has no corresponding forward link.
0x00002123  Source and destination of a cross-domain move do not agree on the object's epoch number. Either source or destination does not have the latest version of the object.
0x00002124  Source and destination of a cross-domain move do not agree on the object's current name. Either source or destination does not have the latest version of the object.
0x00002125  Source and destination for the cross-domain move operation are identical. Caller should use local move operation instead of cross-domain move operation.
0x00002126  Source and destination for a cross-domain move are not in agreement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container.
0x00002127  Destination of a cross-domain move is not authoritative for the destination naming context.
0x00002128  Source and destination of a cross-domain move do not agree on the identity of the source object. Either source or destination does not have the latest version of the source object.
0x00002129  Object being moved across-domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object.
0x0000212A  Another operation which requires exclusive access to the PDC FSMO is already in progress.
0x0000212B  A cross-domain move operation failed such that two versions of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state.
0x0000212C  This object may not be moved across domain boundaries either because cross-domain moves for this class are disallowed, or the object has some special characteristics, e.g.: trust account or restricted RID, which prevent its move.
0x0000212D  Can't move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group. Remove the object from any account group memberships and retry.
0x0000212E  A naming context head must be the immediate child of another naming context head, not of an interior node.
0x0000212F  The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global catalog server, and that the server is up to date with its replication partners. (Applies only to Windows 2000 Domain Naming masters)
0x00002130  Destination domain must be in native mode.
0x00002131  The operation cannot be performed because the server does not have an infrastructure container in the domain of interest.
0x00002132  Cross-domain move of non-empty account groups is not allowed.
0x00002133  Cross-domain move of non-empty resource groups is not allowed.
0x00002134  The search flags for the attribute are invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings.
0x00002135  Tree deletions starting at an object which has an NC head as a descendant are not allowed.
0x00002136  The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use.
0x00002137  The directory service failed to identify the list of objects to delete while attempting a tree deletion.
0x00002139  Only an administrator can modify the membership list of an administrative group.
0x0000213A  Cannot change the primary group ID of a domain controller account.
0x0000213B  An attempt is made to modify the base schema.
0x0000213C  Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed.
0x0000213D  Schema update is not allowed on this DC because the DC is not the schema FSMO Role Owner.
0x0000213E  An object of this class cannot be created under the schema container. You can only create attribute-schema and class-schema objects under the schema container.
0x0000213F  The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it.
0x00002140  The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory.
0x00002141  The specified group type is invalid.
0x00002142  You cannot nest global groups in a mixed domain if the group is security-enabled.
0x00002143  You cannot nest local groups in a mixed domain if the group is security-enabled.
0x00002144  A global group cannot have a local group as a member.
0x00002145  A global group cannot have a universal group as a member.
0x00002146  A universal group cannot have a local group as a member.
0x00002147  A global group cannot have a cross-domain member.
0x00002148  A local group cannot have another cross domain local group as a member.
0x00002149  A group with primary members cannot change to a security-disabled group.
0x0000214A  The schema cache load failed to convert the string default SD on a class-schema object.
0x0000214B  Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers)
0x0000214C  The DSA operation is unable to proceed because of a DNS lookup failure.
0x0000214D  While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync.
0x0000214E  The Security Descriptor attribute could not be read.
0x0000214F  The object requested was not found, but an object with that key was found.
0x00002150  The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 220.127.116.11, 18.104.22.168, and 22.214.171.124, and backlinks can only have syntax 126.96.36.199
0x00002151  Security Account Manager needs to get the boot password.
0x00002152  Security Account Manager needs to get the boot key from floppy disk.
0x00002153  Directory Service cannot start.
0x00002154  Directory Services could not start.
0x00002155  The connection between client and server requires packet privacy or better.
0x00002156  The source domain may not be in the same forest as destination.
0x00002157  The destination domain must be in the forest.
0x00002158  The operation requires that destination domain auditing be enabled.
0x00002159  The operation couldn't locate a DC for the source domain.
0x0000215A  The source object must be a group or user.
0x0000215B  The source object's SID already exists in destination forest.
0x0000215C  The source and destination object must be of the same type.
0x0000215E  Schema information could not be included in the replication request.
0x0000215F  The replication operation could not be completed due to a schema incompatibility.
0x00002160  The replication operation could not be completed due to a previous schema incompatibility.
0x00002161  The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation.
0x00002162  The requested domain could not be deleted because there exist domain controllers that still host this domain.
0x00002163  The requested operation can be performed only on a global catalog server.
0x00002164  A local group can only be a member of other local groups in the same domain.
0x00002165  Foreign security principals cannot be members of universal groups.
0x00002166  The attribute is not allowed to be replicated to the GC because of security reasons.
0x00002167  The checkpoint with the PDC could not be taken because there too many modifications being processed currently.
0x00002168  The operation requires that source domain auditing be enabled.
0x00002169  Security principal objects can only be created inside domain naming contexts.
0x0000216A  A Service Principal Name (SPN) could not be constructed because the provided hostname is not in the necessary format.
0x0000216B  A Filter was passed that uses constructed attributes.
0x0000216C  The unicodePwd attribute value must be enclosed in double quotes.
0x0000216D  Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.
0x0000216E  For security reasons, the operation must be run on the destination DC.
0x0000216F  For security reasons, the source DC must be NT4SP4 or greater.
0x00002170  Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed.
0x00002173  The version of the operating system is incompatible with the current AD DS forest functional level or AD LDS Configuration Set functional level. You must upgrade to a new version of the operating system before this server can become an AD DS Domain Controller or add an AD LDS Instance in this AD DS Forest or AD LDS Configuration Set.
0x00002174  The version of the operating system installed is incompatible with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this domain.
0x00002175  The version of the operating system installed on this server no longer supports the current AD DS Forest functional level or AD LDS Configuration Set functional level. You must raise the AD DS Forest functional level or AD LDS Configuration Set functional level before this server can become an AD DS Domain Controller or an AD LDS Instance in this Forest or Configuration Set.
0x00002176  The version of the operating system installed on this server no longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain controller in this domain.
0x00002177  The version of the operating system installed on this server is incompatible with the functional level of the domain or forest.
0x00002178  The functional level of the domain (or forest) cannot be raised to the requested value, because there exist one or more domain controllers in the domain (or forest) that are at a lower incompatible functional level.
0x00002179  The forest functional level cannot be raised to the requested value since one or more domains are still in mixed domain mode. All domains in the forest must be in native mode, for you to raise the forest functional level.
0x0000217A  The sort order requested is not supported.
0x0000217B  The requested name already exists as a unique identifier.
0x0000217C  The machine account was created pre-NT4. The account needs to be recreated.
0x0000217D  The database is out of version store.
0x0000217E  Unable to continue operation because multiple conflicting controls were used.
0x0000217F  Unable to find a valid security descriptor reference domain for this partition.
0x00002180  Schema update failed: The link identifier is reserved.
0x00002181  Schema update failed: There are no link identifiers available.
0x00002182  An account group cannot have a universal group as a member.
0x00002183  Rename or move operations on naming context heads or read-only objects are not allowed.
0x00002184  Move operations on objects in the schema naming context are not allowed.
0x00002185  A system flag has been set on the object and does not allow the object to be moved or renamed.
0x00002186  This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers.
0x00002187  Unable to resolve completely, a referral to another forest is generated.
0x00002188  The requested action is not supported on standard server.
0x00002189  Could not access a partition of the directory service located on a remote server. Make sure at least one server is running for the partition in question.
0x0000218A  The directory cannot validate the proposed naming context (or partition) name because it does not hold a replica nor can it contact a replica of the naming context above the proposed naming context. Please ensure that the parent naming context is properly registered in DNS, and at least one replica of this naming context is reachable by the Domain Naming master.
0x0000218B  The thread limit for this request was exceeded.
0x0000218C  The Global catalog server is not in the closest site.
0x0000218D  The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute.
0x0000218E  The Directory Service failed to enter single user mode.
0x0000218F  The Directory Service cannot parse the script because of a syntax error.
0x00002190  The Directory Service cannot process the script because of an error.
0x00002191  The directory service cannot perform the requested operation because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress).
0x00002192  The directory service binding must be renegotiated due to a change in the server extensions information.
0x00002193  Operation not allowed on a disabled cross ref.
0x00002194  Schema update failed: No values for msDS-IntId are available.
0x00002195  Schema update failed: Duplicate msDS-INtId. Retry the operation.
0x00002196  Schema deletion failed: attribute is used in rDNAttID.
0x00002197  The directory service failed to authorize the request.
0x00002198  The Directory Service cannot process the script because it is invalid.
0x00002199  The remote create cross reference operation failed on the Domain Naming Master FSMO. The operation's error is in the extended data.
0x0000219A  A cross reference is in use locally with the same name.
0x0000219B  The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the server's domain has been deleted from the forest.
0x0000219C  Writeable NCs prevent this DC from demoting.
0x0000219D  The requested object has a non-unique identifier and cannot be retrieved.
0x0000219E  Insufficient attributes were given to create an object. This object may not exist because it may have been deleted and already garbage collected.
0x0000219F  The group cannot be converted due to attribute restrictions on the requested group type.
0x000021A0  Cross-domain move of non-empty basic application groups is not allowed.
0x000021A1  Cross-domain move of non-empty query based application groups is not allowed.
0x000021A2  The FSMO role ownership could not be verified because its directory partition has not replicated successfully with at least one replication partner.
0x000021A3  The target container for a redirection of a well known object container cannot already be a special container.
0x000021A4  The Directory Service cannot perform the requested operation because a domain rename operation is in progress.
0x000021A5  The directory service detected a child partition below the requested partition name. The partition hierarchy must be created in a top down method.
0x000021A6  The directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime.
0x000021A7  The requested operation is not allowed on an object under the system container.
0x000021A8  The LDAP servers network send queue has filled up because the client is not processing the results of it's requests fast enough. No more requests will be processed until the client catches up. If the client does not catch up then it will be disconnected.
0x000021A9  The scheduled replication did not take place because the system was too busy to execute the request within the schedule window. The replication queue is overloaded. Consider reducing the number of partners or decreasing the scheduled replication frequency.
0x000021AA  At this time, it cannot be determined if the branch replication policy is available on the hub domain controller. Please retry at a later time to account for replication latencies.
0x000021AB  The site settings object for the specified site does not exist.
0x000021AC  The local account store does not contain secret material for the specified account.
0x000021AD  Could not find a writable domain controller in the domain.
0x000021AE  The server object for the domain controller does not exist.
0x000021AF  The NTDS Settings object for the domain controller does not exist.
0x000021B0  The requested search operation is not supported for ASQ searches.
0x000021B1  A required audit event could not be generated for the operation.
0x000021B2  The search flags for the attribute are invalid. The subtree index bit is valid only on single valued attributes.
0x000021B3  The search flags for the attribute are invalid. The tuple index bit is valid only on attributes of Unicode strings.
0x000021B4  The address books are nested too deeply. Failed to build the hierarchy table.
0x000021B5  The specified up-to-date-ness vector is corrupt.
0x000021B6  The request to replicate secrets is denied.
0x000021B7  Schema update failed: The MAPI identifier is reserved.
0x000021B8  Schema update failed: There are no MAPI identifiers available.
0x000021B9  The replication operation failed because the required attributes of the local krbtgt object are missing.
0x000021BA  The domain name of the trusted domain already exists in the forest.
0x000021BB  The flat name of the trusted domain already exists in the forest.
0x000021BC  The User Principal Name (UPN) is invalid.
0x000021BD  OID mapped groups cannot have members.
0x000021BE  The specified OID cannot be found.
0x000021BF  The replication operation failed because the target object referred by a link value is recycled.
0x00002329  DNS server unable to interpret format.
0x0000232A  DNS server failure.
0x0000232B  DNS name does not exist.
0x0000232C  DNS request not supported by name server.
0x0000232D  DNS operation refused.
0x0000232E  DNS name that ought not exist, does exist.
0x0000232F  DNS RR set that ought not exist, does exist.
0x00002330  DNS RR set that ought to exist, does not exist.
0x00002331  DNS server not authoritative for zone.
0x00002332  DNS name in update or prereq is not in zone.
0x00002338  DNS signature failed to verify.
0x00002339  DNS bad key.
0x0000233A  DNS signature validity expired.
0x0000251D  No records found for given DNS query.
0x0000251E  Bad DNS packet.
0x0000251F  No DNS packet.
0x00002520  DNS error, check rcode.
0x00002521  Unsecured DNS packet.
0x0000254F  Invalid DNS type.
0x00002550  Invalid IP address.
0x00002551  Invalid property.
0x00002552  Try DNS operation again later.
0x00002553  Record for given name and type is not unique.
0x00002554  DNS name does not comply with RFC specifications.
0x00002555  DNS name is a fully-qualified DNS name.
0x00002556  DNS name is dotted (multi-label).
0x00002557  DNS name is a single-part name.
0x00002558  DNS name contains an invalid character.
0x00002559  DNS name is entirely numeric.
0x0000255A  The operation requested is not permitted on a DNS root server.
0x0000255B  The record could not be created because this part of the DNS namespace has been delegated to another server.
0x0000255C  The DNS server could not find a set of root hints.
0x0000255D  The DNS server found root hints but they were not consistent across all adapters.
0x0000255E  The specified value is too small for this parameter.
0x0000255F  The specified value is too large for this parameter.
0x00002560  This operation is not allowed while the DNS server is loading zones in the background. Please try again later.
0x00002561  The operation requested is not permitted on against a DNS server running on a read-only DC.
0x00002562  No data is allowed to exist underneath a DNAME record.
0x00002563  This operation requires credentials delegation.
0x00002564  Name resolution policy table has been corrupted. DNS resolution will fail until it is fixed. Contact your network administrator.
0x00002581  DNS zone does not exist.
0x00002582  DNS zone information not available.
0x00002583  Invalid operation for DNS zone.
0x00002584  Invalid DNS zone configuration.
0x00002585  DNS zone has no start of authority (SOA) record.
0x00002586  DNS zone has no Name Server (NS) record.
0x00002587  DNS zone is locked.
0x00002588  DNS zone creation failed.
0x00002589  DNS zone already exists.
0x0000258A  DNS automatic zone already exists.
0x0000258B  Invalid DNS zone type.
0x0000258C  Secondary DNS zone requires master IP address.
0x0000258D  DNS zone not secondary.
0x0000258E  Need secondary IP address.
0x0000258F  WINS initialization failed.
0x00002590  Need WINS servers.
0x00002591  NBTSTAT initialization call failed.
0x00002592  Invalid delete of start of authority (SOA)
0x00002593  A conditional forwarding zone already exists for that name.
0x00002594  This zone must be configured with one or more master DNS server IP addresses.
0x00002595  The operation cannot be performed because this zone is shutdown.
0x000025B3  Primary DNS zone requires datafile.
0x000025B4  Invalid datafile name for DNS zone.
0x000025B5  Failed to open datafile for DNS zone.
0x000025B6  Failed to write datafile for DNS zone.
0x000025B7  Failure while reading datafile for DNS zone.
0x000025E5  DNS record does not exist.
0x000025E6  DNS record format error.
0x000025E7  Node creation failure in DNS.
0x000025E8  Unknown DNS record type.
0x000025E9  DNS record timed out.
0x000025EA  Name not in DNS zone.
0x000025EB  CNAME loop detected.
0x000025EC  Node is a CNAME DNS record.
0x000025ED  A CNAME record already exists for given name.
0x000025EE  Record only at DNS zone root.
0x000025EF  DNS record already exists.
0x000025F0  Secondary DNS zone data error.
0x000025F1  Could not create DNS cache data.
0x000025F2  DNS name does not exist.
0x000025F3  Could not create pointer (PTR) record.
0x000025F4  DNS domain was undeleted.
0x000025F5  The directory service is unavailable.
0x000025F6  DNS zone already exists in the directory service.
0x000025F7  DNS server not creating or reading the boot file for the directory service integrated DNS zone.
0x000025F8  Node is a DNAME DNS record.
0x000025F9  A DNAME record already exists for given name.
0x000025FA  An alias loop has been detected with either CNAME or DNAME records.
0x00002617  DNS AXFR (zone transfer) complete.
0x00002618  DNS zone transfer failed.
0x00002619  Added local WINS server.
0x00002649  Secure update call needs to continue update request.
0x0000267B  TCP/IP network protocol not installed.
0x0000267C  No DNS servers configured for local system.
0x000026AD  The specified directory partition does not exist.
0x000026AE  The specified directory partition already exists.
0x000026AF  This DNS server is not enlisted in the specified directory partition.
0x000026B0  This DNS server is already enlisted in the specified directory partition.
0x000026B1  The directory partition is not available at this time. Please wait a few minutes and try again.
0x000026B2  The application directory partition operation failed. The domain controller holding the domain naming master role is down or unable to service the request or is not running Windows Server 2003.
0x00002714  A blocking operation was interrupted by a call to WSACancelBlockingCall.
0x00002719  The file handle supplied is not valid.
0x0000271D  An attempt was made to access a socket in a way forbidden by its access permissions.
0x0000271E  The system detected an invalid pointer address in attempting to use a pointer argument in a call.
0x00002726  An invalid argument was supplied.
0x00002728  Too many open sockets.
0x00002733  A non-blocking socket operation could not be completed immediately.
0x00002734  A blocking operation is currently executing.
0x00002735  An operation was attempted on a non-blocking socket that already had an operation in progress.
0x00002736  An operation was attempted on something that is not a socket.
0x00002737  A required address was omitted from an operation on a socket.
0x00002738  A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself.
0x00002739  A protocol was specified in the socket function call that does not support the semantics of the socket type requested.
0x0000273A  An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.
0x0000273B  The requested protocol has not been configured into the system, or no implementation for it exists.
0x0000273C  The support for the specified socket type does not exist in this address family.
0x0000273D  The attempted operation is not supported for the type of object referenced.
0x0000273E  The protocol family has not been configured into the system or no implementation for it exists.
0x0000273F  An address incompatible with the requested protocol was used.
0x00002740  Only one usage of each socket address (protocol/network address/port) is normally permitted.
0x00002741  The requested address is not valid in its context.
0x00002742  A socket operation encountered a dead network.
0x00002743  A socket operation was attempted to an unreachable network.
0x00002744  The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.
0x00002745  An established connection was aborted by the software in your host machine.
0x00002746  An existing connection was forcibly closed by the remote host.
0x00002747  An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.
0x00002748  A connect request was made on an already connected socket.
0x00002749  A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.
0x0000274A  A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call.
0x0000274B  Too many references to some kernel object.
0x0000274C  A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
0x0000274D  No connection could be made because the target machine actively refused it.
0x0000274E  Cannot translate name.
0x0000274F  Name component or name was too long.
0x00002750  A socket operation failed because the destination host was down.
0x00002751  A socket operation was attempted to an unreachable host.
0x00002752  Cannot remove a directory that is not empty.
0x00002753  A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously.
0x00002754  Ran out of quota.
0x00002755  Ran out of disk quota.
0x00002756  File handle reference is no longer available.
0x00002757  Item is not available locally.
0x0000276B  WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable.
0x0000276C  The Windows Sockets version requested is not supported.
0x0000276D  Either the application has not called WSAStartup, or WSAStartup failed.
0x00002775  Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence.
0x00002776  No more results can be returned by WSALookupServiceNext.
0x00002777  A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.
0x00002778  The procedure call table is invalid.
0x00002779  The requested service provider is invalid.
0x0000277A  The requested service provider could not be loaded or initialized.
0x0000277B  A system call has failed.
0x0000277C  No such service is known. The service cannot be found in the specified name space.
0x0000277D  The specified class was not found.
0x0000277E  No more results can be returned by WSALookupServiceNext.
0x0000277F  A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.
0x00002780  A database query failed because it was actively refused.
0x00002AF9  No such host is known.
0x00002AFA  This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server.
0x00002AFB  A non-recoverable error occurred during a database lookup.
0x00002AFC  The requested name is valid, but no data of the requested type was found.
0x00002AFD  At least one reserve has arrived.
0x00002AFE  At least one path has arrived.
0x00002AFF  There are no senders.
0x00002B00  There are no receivers.
0x00002B01  Reserve has been confirmed.
0x00002B02  Error due to lack of resources.
0x00002B03  Rejected for administrative reasons - bad credentials.
0x00002B04  Unknown or conflicting style.
0x00002B05  Problem with some part of the filterspec or providerspecific buffer in general.
0x00002B06  Problem with some part of the flowspec.
0x00002B07  General QOS error.
0x00002B08  An invalid or unrecognized service type was found in the flowspec.
0x00002B09  An invalid or inconsistent flowspec was found in the QOS structure.
0x00002B0A  Invalid QOS provider-specific buffer.
0x00002B0B  An invalid QOS filter style was used.
0x00002B0C  An invalid QOS filter type was used.
0x00002B0D  An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR.
0x00002B0E  An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer.
0x00002B0F  An incorrect number of flow descriptors was specified in the QOS structure.
0x00002B10  An unrecognized object was found in the QOS provider-specific buffer.
0x00002B11  An invalid policy object was found in the QOS provider-specific buffer.
0x00002B12  An invalid QOS flow descriptor was found in the flow descriptor list.
0x00002B13  An invalid or inconsistent flowspec was found in the QOS provider specific buffer.
0x00002B14  An invalid FILTERSPEC was found in the QOS provider-specific buffer.
0x00002B15  An invalid shape discard mode object was found in the QOS provider specific buffer.
0x00002B16  An invalid shaping rate object was found in the QOS provider-specific buffer.
0x00002B17  A reserved policy element was found in the QOS provider-specific buffer.
0x00002B18  No such host is known securely.
0x00002B19  Name based IPSEC policy could not be added.
0x000032C8  The specified quick mode policy already exists.
0x000032C9  The specified quick mode policy was not found.
0x000032CA  The specified quick mode policy is being used.
0x000032CB  The specified main mode policy already exists.
0x000032CC  The specified main mode policy was not found
0x000032CD  The specified main mode policy is being used.
0x000032CE  The specified main mode filter already exists.
0x000032CF  The specified main mode filter was not found.
0x000032D0  The specified transport mode filter already exists.
0x000032D1  The specified transport mode filter does not exist.
0x000032D2  The specified main mode authentication list exists.
0x000032D3  The specified main mode authentication list was not found.
0x000032D4  The specified main mode authentication list is being used.
0x000032D5  The specified default main mode policy was not found.
0x000032D6  The specified default main mode authentication list was not found.
0x000032D7  The specified default quick mode policy was not found.
0x000032D8  The specified tunnel mode filter exists.
0x000032D9  The specified tunnel mode filter was not found.
0x000032DA  The Main Mode filter is pending deletion.
0x000032DB  The transport filter is pending deletion.
0x000032DC  The tunnel filter is pending deletion.
0x000032DD  The Main Mode policy is pending deletion.
0x000032DE  The Main Mode authentication bundle is pending deletion.
0x000032DF  The Quick Mode policy is pending deletion.
0x000032E0  The Main Mode policy was successfully added, but some of the requested offers are not supported.
0x000032E1  The Quick Mode policy was successfully added, but some of the requested offers are not supported.
0x000035E8  ERROR_IPSEC_IKE_NEG_STATUS_BEGIN
0x000035E9  IKE authentication credentials are unacceptable
0x000035EA  IKE security attributes are unacceptable
0x000035EB  IKE Negotiation in progress
0x000035EC  General processing error
0x000035ED  Negotiation timed out
0x000035EE  IKE failed to find valid machine certificate. Contact your Network Security Administrator about installing a valid certificate in the appropriate Certificate Store.
0x000035EF  IKE SA deleted by peer before establishment completed
0x000035F0  IKE SA deleted before establishment completed
0x000035F1  Negotiation request sat in Queue too long
0x000035F2  Negotiation request sat in Queue too long
0x000035F3  Negotiation request sat in Queue too long
0x000035F4  Negotiation request sat in Queue too long
0x000035F5  No response from peer
0x000035F6  Negotiation took too long
0x000035F7  Negotiation took too long
0x000035F8  Unknown error occurred
0x000035F9  Certificate Revocation Check failed
0x000035FA  Invalid certificate key usage
0x000035FB  Invalid certificate type
0x000035FC  IKE negotiation failed because the machine certificate used does not have a private key. IPsec certificates require a private key. Contact your Network Security administrator about replacing with a certificate that has a private key.
0x000035FD  Simultaneous rekeys were detected.
0x000035FE  Failure in Diffie-Hellman computation
0x000035FF  Don't know how to process critical payload
0x00003600  Invalid header
0x00003601  No policy configured
0x00003602  Failed to verify signature
0x00003603  Failed to authenticate using Kerberos
0x00003604  Peer's certificate did not have a public key
0x00003605  Error processing error payload
0x00003606  Error processing SA payload
0x00003607  Error processing Proposal payload
0x00003608  Error processing Transform payload
0x00003609  Error processing KE payload
0x0000360A  Error processing ID payload
0x0000360B  Error processing Cert payload
0x0000360C  Error processing Certificate Request payload
0x0000360D  Error processing Hash payload
0x0000360E  Error processing Signature payload
0x0000360F  Error processing Nonce payload
0x00003610  Error processing Notify payload
0x00003611  Error processing Delete Payload
0x00003612  Error processing VendorId payload
0x00003613  Invalid payload received
0x00003614  Soft SA loaded
0x00003615  Soft SA torn down
0x00003616  Invalid cookie received.
0x00003617  Peer failed to send valid machine certificate
0x00003618  Certification Revocation check of peer's certificate failed
0x00003619  New policy invalidated SAs formed with old policy
0x0000361A  There is no available Main Mode IKE policy.
0x0000361B  Failed to enabled TCB privilege.
0x0000361C  Failed to load SECURITY.DLL.
0x0000361D  Failed to obtain security function table dispatch address from SSPI.
0x0000361E  Failed to query Kerberos package to obtain max token size.
0x0000361F  Failed to obtain Kerberos server credentials for ISAKMP/ERROR_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup.
0x00003620  Failed to determine SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes).
0x00003621  Failed to obtain new SPI for the inbound SA from Ipsec driver. The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters.
0x00003622  Given filter is invalid
0x00003623  Memory allocation failed.
0x00003624  Failed to add Security Association to IPSec Driver. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine.
0x00003625  Invalid policy
0x00003626  Invalid DOI
0x00003627  Invalid situation
0x00003628  Diffie-Hellman failure
0x00003629  Invalid Diffie-Hellman group
0x0000362A  Error encrypting payload
0x0000362B  Error decrypting payload
0x0000362C  Policy match error
0x0000362D  Unsupported ID
0x0000362E  Hash verification failed
0x0000362F  Invalid hash algorithm
0x00003630  Invalid hash size
0x00003631  Invalid encryption algorithm
0x00003632  Invalid authentication algorithm
0x00003633  Invalid certificate signature
0x00003634  Load failed
0x00003635  Deleted via RPC call
0x00003636  Temporary state created to perform reinit. This is not a real failure.
0x00003637  The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Please fix the policy on the peer machine.
0x00003638  The recipient cannot handle version of IKE specified in the header.
0x00003639  Key length in certificate is too small for configured security requirements.
0x0000363A  Max number of established MM SAs to peer exceeded.
0x0000363B  IKE received a policy that disables negotiation.
0x0000363C  Reached maximum quick mode limit for the main mode. New main mode will be started.
0x0000363D  Main mode SA lifetime expired or peer sent a main mode delete.
0x0000363E  Main mode SA assumed to be invalid because peer stopped responding.
0x0000363F  Certificate doesn't chain to a trusted root in IPsec policy.
0x00003640  Received unexpected message ID.
0x00003641  Received invalid authentication offers.
0x00003642  Sent DoS cookie notify to initiator.
0x00003643  IKE service is shutting down.
0x00003644  Could not verify binding between CGA address and certificate.
0x00003645  Error processing NatOA payload.
0x00003646  Parameters of the main mode are invalid for this quick mode.
0x00003647  Quick mode SA was expired by IPsec driver.
0x00003648  Too many dynamically added IKEEXT filters were detected.
0x00003649  ERROR_IPSEC_IKE_NEG_STATUS_END
0x0000364A  NAP reauth succeeded and must delete the dummy NAP IkeV2 tunnel.
0x0000364B  Error in assigning inner IP address to intiator in tunnel mode.
0x0000364C  Require configuration payload missing.
0x0000364D  A negotiation running as the security principle who issued the connection is in progress
0x0000364E  SA was deleted due to IKEv1/AuthIP co-existence suppress check.
0x0000364F  Incoming SA request was dropped due to peer IP address rate limiting.
0x00003650  Peer does not support MOBIKE.
0x00003651  SA establishment is not authorized.
0x00003652  SA establishment is not authorized because there is not a sufficiently strong PKINIT-based credential.
0x00003653  SA establishment is not authorized.You may need to enter updated or different credentials such as a smartcard.
0x00003654  SA establishment is not authorized because there is not a sufficiently strong PKINIT-based credential. This might be related to certificate-to-account mapping failure for the SA.
0x00003655  ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END
0x00003656  The SPI in the packet does not match a valid IPsec SA.
0x00003657  Packet was received on an IPsec SA whose lifetime has expired.
0x00003658  Packet was received on an IPsec SA that does not match the packet characteristics.
0x00003659  Packet sequence number replay check failed.
0x0000365A  IPsec header and/or trailer in the packet is invalid.
0x0000365B  IPsec integrity check failed.
0x0000365C  IPsec dropped a clear text packet.
0x0000365D  IPsec dropped an incoming ESP packet in authenticated firewall mode. This drop is benign.
0x0000365E  IPsec dropped a packet due to DoS throttling.
0x00003665  IPsec DoS Protection matched an explicit block rule.
0x00003666  IPsec DoS Protection received an IPsec specific multicast packet which is not allowed.
0x00003667  IPsec DoS Protection received an incorrectly formatted packet.
0x00003668  IPsec DoS Protection failed to look up state.
0x00003669  IPsec DoS Protection failed to create state because the maximum number of entries allowed by policy has been reached.
0x0000366A  IPsec DoS Protection received an IPsec negotiation packet for a keying module which is not allowed by policy.
0x0000366B  IPsec DoS Protection has not been enabled.
0x0000366C  IPsec DoS Protection failed to create a per internal IP rate limit queue because the maximum number of queues allowed by policy has been reached.
0x000036B0  The requested section was not present in the activation context.
0x000036B1  The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
0x000036B2  The application binding data format is invalid.
0x000036B3  The referenced assembly is not installed on your system.
0x000036B4  The manifest file does not begin with the required tag and format information.
0x000036B5  The manifest file contains one or more syntax errors.
0x000036B6  The application attempted to activate a disabled activation context.
0x000036B7  The requested lookup key was not found in any active activation context.
0x000036B8  A component version required by the application conflicts with another component version already active.
0x000036B9  The type requested activation context section does not match the query API used.
0x000036BA  Lack of system resources has required isolated activation to be disabled for the current thread of execution.
0x000036BB  An attempt to set the process default activation context failed because the process default activation context was already set.
0x000036BC  The encoding group identifier specified is not recognized.
0x000036BD  The encoding requested is not recognized.
0x000036BE  The manifest contains a reference to an invalid URI.
0x000036BF  The application manifest contains a reference to a dependent assembly which is not installed
0x000036C0  The manifest for an assembly used by the application has a reference to a dependent assembly which is not installed
0x000036C1  The manifest contains an attribute for the assembly identity which is not valid.
0x000036C2  The manifest is missing the required default namespace specification on the assembly element.
0x000036C3  The manifest has a default namespace specified on the assembly element but its value is not "urn:schemas-microsoft-com:asm.v1".
0x000036C4  The private manifest probed has crossed a path with an unsupported reparse point.
0x000036C5  Two or more components referenced directly or indirectly by the application manifest have files by the same name.
0x000036C6  Two or more components referenced directly or indirectly by the application manifest have window classes with the same name.
0x000036C7  Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs.
0x000036C8  Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs.
0x000036C9  Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs.
0x000036CA  Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs.
0x000036CB  Two or more components referenced directly or indirectly by the application manifest are different versions of the same component which is not permitted.
0x000036CC  A component's file does not match the verification information present in the component manifest.
0x000036CD  The policy manifest contains one or more syntax errors.
0x000036CE  Manifest Parse Error : A string literal was expected, but no opening quote character was found.
0x000036CF  Manifest Parse Error : Incorrect syntax was used in a comment.
0x000036D0  Manifest Parse Error : A name was started with an invalid character.
0x000036D1  Manifest Parse Error : A name contained an invalid character.
0x000036D2  Manifest Parse Error : A string literal contained an invalid character.
0x000036D3  Manifest Parse Error : Invalid syntax for an xml declaration.
0x000036D4  Manifest Parse Error : An Invalid character was found in text content.
0x000036D5  Manifest Parse Error : Required white space was missing.
0x000036D6  Manifest Parse Error : The character ' was expected.
0x000036D7  Manifest Parse Error : A semi colon character was expected.
0x000036D8  Manifest Parse Error : Unbalanced parentheses.
0x000036D9  Manifest Parse Error : Internal error.
0x000036DA  Manifest Parse Error : Whitespace is not allowed at this location.
0x000036DB  Manifest Parse Error : End of file reached in invalid state for current encoding.
0x000036DC  Manifest Parse Error : Missing parenthesis.
0x000036DE  Manifest Parse Error : Multiple colons are not allowed in a name.
0x000036DF  Manifest Parse Error : Invalid character for decimal digit.
0x000036E0  Manifest Parse Error : Invalid character for hexadecimal digit.
0x000036E1  Manifest Parse Error : Invalid unicode character value for this platform.
0x000036E2  Manifest Parse Error : Expecting whitespace or '?'.
0x000036E3  Manifest Parse Error : End tag was not expected at this location.
0x000036E5  Manifest Parse Error : Duplicate attribute.
0x000036E6  Manifest Parse Error : Only one top level element is allowed in an XML document.
0x000036E7  Manifest Parse Error : Invalid at the top level of the document.
0x000036E8  Manifest Parse Error : Invalid xml declaration.
0x000036E9  Manifest Parse Error : XML document must have a top level element.
0x000036EA  Manifest Parse Error : Unexpected end of file.
0x000036EB  Manifest Parse Error : Parameter entities cannot be used inside markup declarations in an internal subset.
0x000036EC  Manifest Parse Error : Element was not closed.
0x000036ED  Manifest Parse Error : End element was missing the character '
0x000036EE  Manifest Parse Error : A string literal was not closed.
0x000036EF  Manifest Parse Error : A comment was not closed.
0x000036F0  Manifest Parse Error : A declaration was not closed.
0x000036F1  Manifest Parse Error : A CDATA section was not closed.
0x000036F2  Manifest Parse Error : The namespace prefix is not allowed to start with the reserved string "xml".
0x000036F3  Manifest Parse Error : System does not support the specified encoding.
0x000036F4  Manifest Parse Error : Switch from current encoding to specified encoding not supported.
0x000036F5  Manifest Parse Error : The name 'xml' is reserved and must be lower case.
0x000036F6  Manifest Parse Error : The standalone attribute must have the value 'yes' or 'no'.
0x000036F7  Manifest Parse Error : The standalone attribute cannot be used in external entities.
0x000036F8  Manifest Parse Error : Invalid version number.
0x000036F9  Manifest Parse Error : Missing equals sign between attribute and attribute value.
0x000036FA  Assembly Protection Error : Unable to recover the specified assembly.
0x000036FB  Assembly Protection Error : The public key for an assembly was too short to be allowed.
0x000036FC  Assembly Protection Error : The catalog for an assembly is not valid, or does not match the assembly's manifest.
0x000036FD  An HRESULT could not be translated to a corresponding Win32 error code.
0x000036FE  Assembly Protection Error : The catalog for an assembly is missing.
0x000036FF  The supplied assembly identity is missing one or more attributes which must be present in this context.
0x00003700  The supplied assembly identity has one or more attribute names that contain characters not permitted in XML names.
0x00003701  The referenced assembly could not be found.
0x00003702  The activation context activation stack for the running thread of execution is corrupt.
0x00003703  The application isolation metadata for this process or thread has become corrupt.
0x00003704  The activation context being deactivated is not the most recently activated one.
0x00003705  The activation context being deactivated is not active for the current thread of execution.
0x00003706  The activation context being deactivated has already been deactivated.
0x00003707  A component used by the isolation facility has requested to terminate the process.
0x00003708  A kernel mode component is releasing a reference on an activation context.
0x00003709  The activation context of system default assembly could not be generated.
0x0000370A  The value of an attribute in an identity is not within the legal range.
0x0000370B  The name of an attribute in an identity is not within the legal range.
0x0000370C  An identity contains two definitions for the same attribute.
0x0000370D  The identity string is malformed. This may be due to a trailing comma, more than two unnamed attributes, missing attribute name or missing attribute value.
0x0000370E  A string containing localized substitutable content was malformed. Either a dollar sign ($) was followed by something other than a left parenthesis or another dollar sign or an substitution's right parenthesis was not found.
0x0000370F  The public key token does not correspond to the public key specified.
0x00003710  A substitution string had no mapping.
0x00003711  The component must be locked before making the request.
0x00003712  The component store has been corrupted.
0x00003713  An advanced installer failed during setup or servicing.
0x00003714  The character encoding in the XML declaration did not match the encoding used in the document.
0x00003715  The identities of the manifests are identical but their contents are different.
0x00003716  The component identities are different.
0x00003717  The assembly is not a deployment.
0x00003718  The file is not a part of the assembly.
0x00003719  The size of the manifest exceeds the maximum allowed.
0x0000371A  The setting is not registered.
0x0000371B  One or more required members of the transaction are not present.
0x0000371C  The SMI primitive installer failed during setup or servicing.
0x0000371D  A generic command executable returned a result that indicates failure.
0x0000371E  A component is missing file verification information in its manifest.
0x00003A98  The specified channel path is invalid.
0x00003A99  The specified query is invalid.
0x00003A9A  The publisher metadata cannot be found in the resource.
0x00003A9C  The specified publisher name is invalid.
0x00003A9D  The event data raised by the publisher is not compatible with the event template definition in the publisher's manifest
0x00003A9F  The specified channel could not be found. Check channel configuration.
0x00003AA0  The specified xml text was not well-formed. See Extended Error for more details.
0x00003AA1  The caller is trying to subscribe to a direct channel which is not allowed. The events for a direct channel go directly to a logfile and cannot be subscribed to.
0x00003AA2  Configuration error.
0x00003AA3  The query result is stale / invalid. This may be due to the log being cleared or rolling over after the query result was created. Users should handle this code by releasing the query result object and reissuing the query.
0x00003AA4  Query result is currently at an invalid position.
0x00003AA5  Registered MSXML doesn't support validation.
0x00003AA6  An expression can only be followed by a change of scope operation if it itself evaluates to a node set and is not already part of some other change of scope operation.
0x00003AA7  Can't perform a step operation from a term that does not represent an element set.
0x00003AA8  Left hand side arguments to binary operators must be either attributes, nodes or variables and right hand side arguments must be constants.
0x00003AA9  A step operation must involve either a node test or, in the case of a predicate, an algebraic expression against which to test each node in the node set identified by the preceeding node set can be evaluated.
0x00003AAA  This data type is currently unsupported.
0x00003AAC  This operator is unsupported by this implementation of the filter.
0x00003AAD  The token encountered was unexpected.
0x00003AAE  The requested operation cannot be performed over an enabled direct channel. The channel must first be disabled before performing the requested operation.
0x00003AB1  The channel fails to activate.
0x00003AB2  The xpath expression exceeded supported complexity. Please symplify it or split it into two or more simple expressions.
0x00003AB3  the message resource is present but the message is not found in the string/message table
0x00003AB4  The message id for the desired message could not be found.