This document contains the list of Top Services Topics for VNXe, identified by EMC Support as the most trending topics for the month of March 2019:
It is recommended that you also check for important information such as advisories (ETAs, ESAs), and other key resources on the “Support by Product” pages on the EMC Online Support portal.
By default in present code release PAHC (proactive health check) flag "Check auto transfer status" check as warning after disabling automatic file transfer feature.
While trying to refresh the support contract receiving error "The system was unable to contact the web service to refresh contract data. Record the error code and go to the Product Support Page for all your support options. (Error Code:0x6400b71)"
Dell/EMC VNX: NDMP backups failing with NDMP_DEVICE_BUSY_ERR (User Correctable)
VNX: CRU VIDEO:VNX Unified Storage SP Replacements
VNXe: CRU VIDEO:VNXe3100/3150: How to replace a Storage Processor
Customer was using zero disk command to clean out VNX arrays. They would run the getzeromark option to view the zeromark and confirm with the default value but the zero mark field only returned N/A.
VNX: Unable to delete old SPCollect files from /nas/udoctor - error "Read-only file system" (Customer Correctable)
Host is only configured with one path to the storage system. Configure multiple paths to establish redundancy.
VNXe: CRU VIDEO:VNXe3300: How to replace a Disk
In an effort to provide the best possible support, Dell EMC is focusing its Total Customer Experience (TCE) efforts on recent product software releases.
|Note: Please click “Follow” at the top right of this screen (when logged in) to receive update notifications.|