Mainframe error "ANR0200E" during startup of STORSRVD

Product

 

Solutions Enabler for MVS

Mainframe

 

 

Description


Mainframe error "ANR0200E" during startup of STORSRVD.

 

Error msg (during startup of STORSRVD):

STC13841  ANR0200E pdsSockBind error 700004023: ÝPDS/Sock¨ bind() returned port address in use; from srvSockListenSetup,

                   line 1261

STC13841  ANR0200E pdsSockBind error 700004023: ÝPDS/Sock¨ bind() returned port address in use; from srvSockListenSetup,

                   line 1261

STC13841  ANR0200E pdsSockBind error 700004023: ÝPDS/Sock¨ bind() returned port address in use; from srvSockListenSetup,

                   line 1261

STC13841  ANR0200E pdsSockBind error 700004023: ÝPDS/Sock¨ bind() returned port address in use; from srvSockListenSetup,

                   line 1261

 

 

Cause

 

STORSRVD does not immediately start listening on port 2707 even though 2707 has been configured.

If you quickly issue the "netstat" command during the initialization of STORSRVD, you will notice that another port is used before STORSRVD starts listening on port 2707:

 

For example:

 

$ netstat

MVS TCP/IP NETSTAT CS V1R13       TCPIP Name: TCPIP           08:41:47  

User Id  Conn Local Socket           Foreign Socket         State   

-------  ---- ------------ --------------         -----   

YPERSRV  000004BC 0.0.0.0..1068          *..*                   UDP   

 

$ netstat

MVS TCP/IP NETSTAT CS V1R13       TCPIP Name: TCPIP           08:41:50

User Id  Conn Local Socket           Foreign Socket         State 

-------  ---- ------------ --------------         ----- 

YPERSRV  000004C8 0.0.0.0..2707          0.0.0.0..0             Listen

$

 

In this case, if  the other port is reserved, or already in use in the mainframe environment, you may see the aforementioned error messages.

 

 

Resolution

 

           

The "ANR0200E pdsSockBind error 700004023: ÝPDS/Sock¨ bind() returned port address in use; from srvSockListenSetup" messages during startup of STORSRVD can be ignored, if they are followed by the success message below:

 

ANR0020I SYMAPI server listening on port 2707 over IPv6 with IPv4 mapping

ANR0001I SYMAPI server ready to accept ONLY NONSECURE connections

 

 



For more information, Refer to EMC Solution Article 173888