• Connectrix: Top Services Topics

    This document contains the list of Top Services Topics for Connectrix, identified by EMC Support as the most trending topics for the month of August 2017: It is recommended that you also check for important inform...
    Jithin Nadukandathil
    last modified by Jithin Nadukandathil
  • Connectrix MDS series: credit loss and dropped frames on FC port

    Article Number: 483480 Article Title and Link for Registered Users: Connectrix MDS series: credit loss and dropped frames on FC port Affected Product(s): Connectrix MDS-Series Hardware,Connectrix MDS-Series Firmwar...
    EMC TechCom
    last modified by EMC TechCom
  • Best practices for Zoning on Brocade switches

    Article Number: 322728 Article Title and Link for Registered Users: Best practices for Zoning on Brocade switches Affected Product(s): Connectrix,Connectrix B-Series Hardware Article Summary: Best practices for Zo...
    EMC TechCom
    last modified by EMC TechCom
  • Connectrix B-Series: How to recover from hung state on Management Ethernet port, with no access using webtools, telnet, or SSH

    Article Number: 330423 Article Title and Link for Registered Users: Connectrix B-Series: How to recover from hung state on Management Ethernet port, with no access using webtools, telnet, or SSH Affected Product(s):...
    EMC TechCom
    last modified by EMC TechCom
  • Connectrix B-Series: Troubleshooting Port "Laser_Flt" Message

    Article Number: 468072 Article Title and Link for Registered Users: Connectrix B-Series: Troubleshooting Port "Laser_Flt" Message Affected Product(s): Connectrix B-Series Hardware Article Summary: Port link going ...
    EMC TechCom
    last modified by EMC TechCom
  • How to check the link connectivity between a host and storage on SAN switches

    Article Number: 322967 Article Title and Link for Registered Users: How to check the link connectivity between a host and storage on SAN switches Affected Product(s): Connectrix B-Series Hardware,Connectrix MDS-Ser...
    EMC TechCom
    last modified by EMC TechCom
  • Cisco Npiv and fport-channel trunk quetion

    This might have already been answered. But, I have a UCS vBlock the switch has NPIV enabled and the FI on the UCS are NPV enabled.  What I nned to do is enable another Cisco switch 9500 series outside the vBloc...
    Bing59
    last modified by Bing59
  • Unable to logon using admin account on a cisco mds switch

    I have a cisco MDS 9710 switch with TACACS enabled. I am unable to logon using the admin account. Getting access denied. Tried resetting the password for the account but even then logon doesn't work.   Could som...
    harryvj
    last modified by harryvj
  • Cisco MDS Refuses to Authenticate to RADIUS Server

    I have my switch configured to use a RADIUS server for remote authentication. If I log in with a local user, I can prove the authentication to RADIUS works with the aaa test command. If I try to log in via Device Mana...
  • Connectrix B-Series: How do you enable HTTPS/SSL on a Fabric OS based switch?

    Article Number: 503767 Article Title and Link for Registered Users: Connectrix B-Series: How do you enable HTTPS/SSL on a Fabric OS based switch? Affected Product(s): Connectrix B-Series Hardware,Connectrix B-Serie...
    EMC TechCom
    last modified by EMC TechCom
  • Connectrix MDS : copy running-config startup-config fabric fails

    Article Number: 501629 Article Title and Link for Registered Users: Connectrix MDS : copy running-config startup-config fabric fails Affected Product(s): Connectrix MDS-9513 Article Summary: copy running-config st...
    EMC TechCom
    last modified by EMC TechCom
  • Cisco: NPIV devices not getting flogi switch logging NPIV bit was not set in the FLOGI LS_ACC

    Article Number: 500688 Article Title and Link for Registered Users: Cisco: NPIV devices not getting flogi switch logging NPIV bit was not set in the FLOGI LS_ACC Affected Product(s): Connectrix MDS-Series Hardware,...
    EMC TechCom
    last modified by EMC TechCom
  • Cisco: get error "wrong engineID format" when changing snmp user account/trying to remove duplicate snmp account

    Article Number: 495381 Article Title and Link for Registered Users: Cisco: get error "wrong engineID format" when changing snmp user account/trying to remove duplicate snmp account Affected Product(s): Connectrix M...
    EMC TechCom
    last modified by EMC TechCom
  • Cisco MDS: VSAN Isolation due to remote zone server not responding

    Article Number: 494726 Article Title and Link for Registered Users: Cisco MDS: VSAN Isolation due to remote zone server not responding Affected Product(s): Connectrix,Connectrix MDS-Series Firmware 5.X Article Sum...
    EMC TechCom
    last modified by EMC TechCom
  • Connectrix B-Series: Security Vulnerability CVE-2016-2183

    Article Number: 498918 Article Title and Link for Registered Users: Connectrix B-Series: Security Vulnerability CVE-2016-2183 Affected Product(s): Connectrix B-Series Firmware,Connectrix Manager Converged Network E...
    EMC TechCom
    last modified by EMC TechCom
  • Encountering NBSF-1005 when upgrading FOS

    Article Number: 498651 Article Title and Link for Registered Users: Encountering NBSF-1005 when upgrading FOS Affected Product(s): Connectrix,Connectrix B-Series Firmware Article Summary: The following messages we...
    EMC TechCom
    last modified by EMC TechCom
  • Connectrix B Series MP 7800 / FX8-24 Blade VE_ports stuck at G_port state after an FCIP bounce although the FCIP tunnel is back up.

    Article Number: 504639 Article Title and Link for Registered Users: Connectrix B Series MP 7800 / FX8-24 Blade VE_ports stuck at G_port state after an FCIP bounce although the FCIP tunnel is back up. Affected Produc...
    EMC TechCom
    last modified by EMC TechCom
  • Connectrix B-Series: C3 TX discards logging on ISL's, when ISL R_RDY Mode turned on and HP 3PAR storage in the environment with IOCTL messages turned on

    Article Number: 500293 Article Title and Link for Registered Users: Connectrix B-Series: C3 TX discards logging on ISL's, when ISL R_RDY Mode turned on and HP 3PAR storage in the environment with IOCTL messages turne...
    EMC TechCom
    last modified by EMC TechCom
  • High Utilization of switch CPU > 80%

    Article Number: 502618 Article Title and Link for Registered Users: High Utilization of switch CPU > 80% Affected Product(s): Connectrix,Connectrix B-Series Firmware,Connectrix B-Series Fabric OS 7.X,ViPR SRM A...
    EMC TechCom
    last modified by EMC TechCom
  • How to collect technical support information when we are unable to launch CMCNE?

    Open video

    suby
    last modified by suby