• Array-based enablers available for CLARiiON and VNX arrays.

    Product:   CLARiiON CX4 Series, VNX Series   Description:   Below are array-based enablers available for CLARiiON and VNX arrays.   Resolution:   The following enablers are available for ...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee
  • How to collect a NAR file

    Product:   CLARiiON     Description:   How to collect a NAR file   Resolution:     See attached PDF file and also Knowledgebase article emc218359.
    3CsForumModerator
    last modified by 3CsForumModerator
  • How to rename PowerPath devices

    Product:   AX series CX series CX3 series CX4 series PowerPath v5.3 or later   Description:   After the replacement of HBA or SP, or something like that, we might found that the old device names ...
    3CsForumModerator
    last modified by 3CsForumModerator
  • How to restart the Management Server

    Product:   CLARiiON CX4 series, CLARiiON CX3 series, CLARiiON CX series, CLARiiON FC4700 Navisphere   Description:   Symptoms like the following:   A Fatal Event icon (red letter "F" in a circ...
    3CsForumModerator
    last modified by 3CsForumModerator
  • Adding a Host to Multiple Storage groups.

    Product:   CLARiiON AX Series, CLARiiON CX Series,CLARiiON iSCSI Array, VNX, VNXe.   Description:   The rule is that multiple hosts can access one Storage Group, but one host cannot access multiple S...
    Satish_Kutty
    last modified by Satish_Kutty
  • Dial-home events 740a, 7402, and 7409 can be ignored when delivered with SPS tests in FLARE Release 26 and later.

    Product Product: CLARiiON CX700 Product: CLARiiON CX500 Product: CLARiiON CX3 Series Product: CLARiiON CX4 Series EMC Firmware: FLARE Release 26 EMC Firmware: FLARE Release 28 EMC Firmware: FLARE Release 29 EMC...
    Sameeksha
    last modified by Sameeksha
  • How do I move a CLARiiON array from one cabinet or rack to another?

    Product CLARiiON CX Series Disk Library DL Series   Description How do I move a CLARiiON array from one cabinet or rack to another? Requirements for moving a CLARiiON array from one cabinet to another How to disa...
    Sameeksha
    last modified by Sameeksha
  • Requirements to enable write caching on CLARiiON CX3-10, CX3-20 and CX3-40 storage systems

    Product:   CLARiiON CX3 Series ( This statement does not apply: Product: CLARiiON CX3-80)   Description:   Requirements to enable write caching on CLARiiON CX3-10, CX3-20 and CX3-40 storage system...
    Suman Pinnamaneni
    last modified by Suman Pinnamaneni
  • What conditions can cause write cache to become disabled ?

    Product:   CLARiiON   Description:   Why is write cache disabled?   Resolution: Write cache will become disabled for the following conditions: A vault drive failure (Vault drives are in B...
    Ganapa Madhusudan
    last modified by Ganapa Madhusudan
  • Redhat 6.2 PowerPath 5.7 pseudo names change after reboot.

    Product:   CLARiiON CX4 Series, Powerpath 5.7 SP1   Description:   Powerpath 5.7 SP1 pseudo names change after reboot.   After reboot, 20 out of 28 pseudo names changes on the host. The use...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee
  • How to configure the reserved LUN pool

    Product:   CLARiiON   Description:   How to configure the reserved LUN pool   Fix   To configure the reserved LUN pool perform the following: In the Enterprise Storage dialog box, click the S...
    Ganapa Madhusudan
    last modified by Ganapa Madhusudan
  • Can FRUMON code versions be different on link controller cards (LCCs) in a CLARiiON DAE?

    Product:   CLARiiON Series   Description:   LCC FRUMON revisions vary between LCCs in the same DAE.   The following shows an LCC mismatch in a DAE3P    Bus 3 Enclosure 0 LCC A Revis...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee
  • How do I monitor the SP boot sequence on a CLARiiON array?

    Product:   CLARiiON Series   Description:   SP hanging during power-up. In case, best practice is to monitor the SP boot sequence and then find out the root cause of the SP hang issue.   Resolu...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee
  • How to determine a host LUN  number to a CLARiiON LUN number on  UNIX or Windows 2000 Hosts?

    Product:   CLARiiON Series   Description:   Below is the procedure to find out Host LUN numbers (HLU) mapped to CLARiiON LUN numbers (ALU).   Resolution:   Using the Navicli command line ...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee
  • What information must be provided to EMC for a single drive failure situation?

    Product:   CLARiiON Series   Description:   For a single drive failure scenario, slot information of the drive reported by customer is available, but the TLA part number is required to order the driv...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee
  • How do I perform a LUN migration?

    Product:   CLARiiON Series   Description:   Enclosure was changed to ATA for increased drive capacity.  Data needed to be copied from one LUN to another.  LUN Migration was used.  Duri...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee
  • Two /boot (/dev/sdg1 and /dev/emcpowera1) mounts display when the "df -k" command is executed on a Linux server attached to CLARiiON array.

    Product:   CLARiiON Series   Description:   Two /boot (/dev/sdg1 and /dev/emcpowera1) mounts display when the "df -k" command is executed on a Linux server attached to CLARiiON array. /boot showing a...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee
  • Solaris host connected to CLARiiON runs slow using PowerPath Encryption with RSA 5.3

    Product:   CLARiiON CX4 Series, PowerPath Encryption with RSA 5.3   Description:   Solaris host runs slow using PowerPath Encryption with RSA 5.3. Database runs extremely slow when PowerPath LUNs ar...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee
  • Group Reservation Conflict for Initiator in CLARiiON.

    Product:   CLARiiON CX, CX3, CX4 Series, VMware   Description:   TDD              992a36c0 Group Reservation Conflict for Initiator &n...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee
  • SP panic during LUN migration.

    Product:   CLARiiON Series   Description:   SP panic during LUN migration [Bugcheck: FEP_SFE_MOD_PTR_PANIC] BugcheckCode: 1400012  Definition: FEP_SFE_MOD_PTR_PANIC   SP is bugchecking in...
    Anirudh.Banerjee
    last modified by Anirudh.Banerjee